Http control Ufo

[Dylantje]

Dear is see you have hacked the ufo rgbw controller..
Great job!!!!

I wil try to use this controller for my Home automation, Domoticz.
Is there perhaps a option that i can use your way with Http commands?
Domoticz can use the Http commands directly...
Or perhaps a script, domoticz can work with different types.

I did install the ledenet api, only now i am stuc.
Did install it on my RPi.

How can i use the api on a simple way.
I do not understand where i can place/put the api [ in putty is get strange values ]
Perhaps you have some examples, of your nice work

I am not ict expert... :-(
Hope you will help me with your nice hack...
I do not have a Ufo j@ this moment [ orderd 2 ] only i will learn before i got 1...

Thanks!!

[sidoh]

You could use ha_gateway. Allows you to set up a RESTful API and has an integration with ledenet_api.

[Dylantje]

mm Thanks Ha is on the RPi..
Like i say... no ict expert :-)

I read that need the HW adres [ i do not have yet ] this is the mac?
what is the name for? so i now what controller? or the name in my lan?
Can i ad more controller in the config file?

Only i do not understand how i give a command...

[sidoh]

Yeah, hardware address is MAC address. Are you looking at the example config file?

      # There are a couple of ways you can specify which device you'd like
      # to control:
      #   1. Specify no params. Control an arbitrary (maybe the only?) LEDENET
      #      device on your network.
      #   2. Specify a hardware address. ha_gateway will attempt to resolve
      #      the host from the hw addr using a discovery protocol. This is
      #      preferable if you don't have a hostname or static IP for the
      #      LEDENET device.
      #   3. Specify a host directly.
      hw_addr: 00:00:00:00:00:00
      host: ledenet1

You can also use host if you want to hardcode a local IP address or hostname. hw_addr is just more robust to network changes.

[Dylantje]

exactly the example is where i am looking at. [[ i use the mac and set the ip, when i got 1 :-) ]
This is the easy part... :-)

What do i need to do more....
Can i create now a simple http command?
Perhaps you have a example ?

[sidoh]

ha_gateway is a little REST server. You start it on some port (defined on the config), and then you can send REST commands at it. For example:

$ curl -vvv -X PUT -d'status=on'  http://192.168.1.100:8000/lights/light_name

where 192.168.1.100 is whatever IP the server is running on, and light_name is whatever you called the light in the YAML config.

The full HTTP spec is defined in the README of ha_gateway.

[Dylantje]

going to try when i get the controller.. [ hard to get on this way ]
Only i do not understand the way this working.
Is it correct that the Ha_gateway is a kind of bridge?
So it is possible to give command from a other device to the Wifi controller?

I need your code and the Ha_gateway...
When i see your code i can control the whole range, rgb and fade etc.
When i see the Ha gateway i see only on/off.

This part curl -vvv -X PUT -d'status=on' http://192.168.1.100:8000/lights/light_name that i can use in a script file?
Only when i will activate the: SEVEN_COLOR_CROSS_FADE?

Do i need to place your example in a script file?
What type are possible?Lua?
Like my hue scrips:

#!/bin/sh
curl -H "Accept: application/json" -X PUT --data '{"on":false}' http://192.168.5.36/api/newdeveloper/lights/4/state

When i install HA-gateway, and reboot my rpi, is this server running?
Or do i need to start it manual?
Is there a crontab or something to check?

[ cannot wait until i get the controller. ]

[sidoh]

The full API documentation for ha_gateway is in the README. Here's the section for light devices:

https://github.com/sidoh/ha_gateway#put-lightlight_name

You can currently control on/off, RGB, and "level" (brightness). Would be easy enough to add additional parameters.

That's just the structure of an HTTP request to ha_gateway. You can obviously send it requests in a lot of ways.

[Dylantje]

dear...
Do have the wifi ufo @ home.
Did connect to my Wifi.
So i have the mac and a Ip...
What are my next steps???