Hello, when i execute the netbox importer i receive an error. I think that the error is due to a check of the hostname of the devices in prompt.
Could you help me to fix the problem ?
netbox-netprod-importer import -f devices.yaml -u doperator -p -v DEBUG
....
DEBUG: netmiko: read_channel: Ethernet100/1/38 is down (Link not connected)
Hardware: 100/1000 Ethernet, address: 30e4.db74.6827 (bia 30e4.db74.6827)
MTU 1500 bytes, BW 0 Kbit, DLY 10 usec
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is access
auto-duplex, auto-speed
Beacon is turned off
Input flow-control is off, output flow-control is on
Switchport monitor is off
EtherType is 0x8100
Last link flapped never
Last clearing of "show interface" counters never
30 seconds input rate 0 bits/sec, 0 packets/sec
30 seconds output rate 0 bits/sec, 0 packets/sec
Load-Interval #2: 5 minute (300 seconds)
input rate 0 bps, 0 pps; output rate 0 bps, 0 pps
RX
0 unicast packets 0 multicast packets 0 broadcast packets
0 input packets 0 bytes
0 jumbo packets 0 storm suppression bytes
0 runts 0 giants 0 CRC 0 no buffer
0 input error 0 short frame 0 overrun 0 underrun 0 ignored
0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
0 input with dribble 0 input discard
0 Rx pause
TX
0 unicast packets 0 multicast packets 0 broadcast packets
0 output packets 0 bytes
0 jumbo packets
0 output errors 0 collision 0 deferred 0 late collision
0 lost carrier 0 no carrier 0 babble 0 output discard
0 Tx pause
0 interface resets
DEBUG: netmiko: read_channel:
DEBUG: netmiko: read_channel:
DEBUG: netmiko: write_channel: b'exit\n'
ERROR: netbox_importer: Error when polling device Nx5548U-SSC: Search pattern never detected in send_command: Nx5548U-SSC#
100%|██████████████████████████████████████████████████████████████████████████████████████████████████████████████████████| 2/2 [00:14<00:00, 9.69s/it]DEBUG: paramiko.transport: EOF in transport thread
100%|██████████████████████████████████████████████████████████████████████████████████████████████████████████████████████| 2/2 [00
(venv) devnet@ubuntu:/opt/netbox$ python --version
Python 3.8.5
(venv) devnet@ubuntu:/opt/netbox$ pip freeze
appdirs==1.4.4
asgiref==3.3.1
attrs==20.3.0
bcrypt==3.2.0
cachetools==4.2.0
certifi==2020.12.5
cffi==1.14.4
chardet==4.0.0
ciscoconfparse==1.5.22
click==7.1.2
colorama==0.4.4
coreapi==2.3.3
coreschema==0.0.4
cryptography==3.3.1
defusedxml==0.6.0
Django==3.1.3
django-cacheops==5.1
django-cors-headers==3.5.0
django-debug-toolbar==3.1.1
django-filter==2.4.0
django-js-asset==1.2.2
django-mptt==0.11.0
django-pglocks==1.0.4
django-prometheus==2.1.0
django-rq==2.4.0
django-storages==1.11
django-tables2==2.3.3
django-taggit==1.3.0
django-timezone-field==4.0
djangorestframework==3.12.2
dnspython==2.0.0
drf-yasg==1.20.0
funcy==1.15
future==0.18.2
gunicorn==20.0.4
idna==2.10
inflection==0.5.1
itypes==1.2.0
Jinja2==2.11.2
jsonschema==3.2.0
junos-eznc==2.5.4
lxml==4.6.2
Markdown==3.3.3
MarkupSafe==1.1.1
napalm==3.2.0
ncclient==0.6.9
netaddr==0.8.0
netbox-netprod-importer==0.3.3
netboxapi==1.1.7
netmiko==3.3.2
ntc-templates==1.6.0
packaging==20.8
paramiko==2.7.2
passlib==1.7.4
Pillow==8.0.1
prometheus-client==0.9.0
psycopg2-binary==2.8.6
pycparser==2.20
pycryptodome==3.9.9
pyeapi==0.8.4
PyNaCl==1.4.0
pyparsing==2.4.7
pyrsistent==0.17.3
pyserial==3.5
pytz==2020.4
PyYAML==5.3.1
redis==3.5.3
requests==2.25.1
rq==1.7.0
ruamel.yaml==0.16.12
ruamel.yaml.clib==0.2.2
scp==0.13.3
simplejson==3.17.2
six==1.15.0
sqlparse==0.4.1
svgwrite==1.4
swagger-spec-validator==2.7.3
tenacity==6.3.1
textfsm==1.1.0
tqdm==4.54.1
transitions==0.8.5
uritemplate==3.0.1
urllib3==1.26.2
yamlordereddictloader==0.4.0
(venv) devnet@ubuntu:/opt/netbox$ more devices.yaml
Nx5548U-SSC:
driver: "nxos_ssh"
target: "10.44.141.2"
Nx5548U-FXP:
driver: "nxos_ssh"
target: "10.44.141.3"
Hello, when i execute the netbox importer i receive an error. I think that the error is due to a check of the hostname of the devices in prompt.
Could you help me to fix the problem ?
netbox-netprod-importer import -f devices.yaml -u doperator -p -v DEBUG
....
DEBUG: netmiko: read_channel: Ethernet100/1/38 is down (Link not connected)
Hardware: 100/1000 Ethernet, address: 30e4.db74.6827 (bia 30e4.db74.6827)
MTU 1500 bytes, BW 0 Kbit, DLY 10 usec
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is access
auto-duplex, auto-speed
Beacon is turned off
Input flow-control is off, output flow-control is on
Switchport monitor is off
EtherType is 0x8100
Last link flapped never
Last clearing of "show interface" counters never
30 seconds input rate 0 bits/sec, 0 packets/sec
30 seconds output rate 0 bits/sec, 0 packets/sec
Load-Interval #2: 5 minute (300 seconds)
input rate 0 bps, 0 pps; output rate 0 bps, 0 pps
RX
0 unicast packets 0 multicast packets 0 broadcast packets
0 input packets 0 bytes
0 jumbo packets 0 storm suppression bytes
0 runts 0 giants 0 CRC 0 no buffer
0 input error 0 short frame 0 overrun 0 underrun 0 ignored
0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
0 input with dribble 0 input discard
0 Rx pause
TX
0 unicast packets 0 multicast packets 0 broadcast packets
0 output packets 0 bytes
0 jumbo packets
0 output errors 0 collision 0 deferred 0 late collision
0 lost carrier 0 no carrier 0 babble 0 output discard
0 Tx pause
0 interface resets
DEBUG: netmiko: read_channel:
DEBUG: netmiko: read_channel:
DEBUG: netmiko: write_channel: b'exit\n'
ERROR: netbox_importer: Error when polling device Nx5548U-SSC: Search pattern never detected in send_command: Nx5548U-SSC#
100%|██████████████████████████████████████████████████████████████████████████████████████████████████████████████████████| 2/2 [00:14<00:00, 9.69s/it]DEBUG: paramiko.transport: EOF in transport thread
100%|██████████████████████████████████████████████████████████████████████████████████████████████████████████████████████| 2/2 [00
(venv) devnet@ubuntu:/opt/netbox$ python --version
Python 3.8.5
(venv) devnet@ubuntu:/opt/netbox$ pip freeze
appdirs==1.4.4
asgiref==3.3.1
attrs==20.3.0
bcrypt==3.2.0
cachetools==4.2.0
certifi==2020.12.5
cffi==1.14.4
chardet==4.0.0
ciscoconfparse==1.5.22
click==7.1.2
colorama==0.4.4
coreapi==2.3.3
coreschema==0.0.4
cryptography==3.3.1
defusedxml==0.6.0
Django==3.1.3
django-cacheops==5.1
django-cors-headers==3.5.0
django-debug-toolbar==3.1.1
django-filter==2.4.0
django-js-asset==1.2.2
django-mptt==0.11.0
django-pglocks==1.0.4
django-prometheus==2.1.0
django-rq==2.4.0
django-storages==1.11
django-tables2==2.3.3
django-taggit==1.3.0
django-timezone-field==4.0
djangorestframework==3.12.2
dnspython==2.0.0
drf-yasg==1.20.0
funcy==1.15
future==0.18.2
gunicorn==20.0.4
idna==2.10
inflection==0.5.1
itypes==1.2.0
Jinja2==2.11.2
jsonschema==3.2.0
junos-eznc==2.5.4
lxml==4.6.2
Markdown==3.3.3
MarkupSafe==1.1.1
napalm==3.2.0
ncclient==0.6.9
netaddr==0.8.0
netbox-netprod-importer==0.3.3
netboxapi==1.1.7
netmiko==3.3.2
ntc-templates==1.6.0
packaging==20.8
paramiko==2.7.2
passlib==1.7.4
Pillow==8.0.1
prometheus-client==0.9.0
psycopg2-binary==2.8.6
pycparser==2.20
pycryptodome==3.9.9
pyeapi==0.8.4
PyNaCl==1.4.0
pyparsing==2.4.7
pyrsistent==0.17.3
pyserial==3.5
pytz==2020.4
PyYAML==5.3.1
redis==3.5.3
requests==2.25.1
rq==1.7.0
ruamel.yaml==0.16.12
ruamel.yaml.clib==0.2.2
scp==0.13.3
simplejson==3.17.2
six==1.15.0
sqlparse==0.4.1
svgwrite==1.4
swagger-spec-validator==2.7.3
tenacity==6.3.1
textfsm==1.1.0
tqdm==4.54.1
transitions==0.8.5
uritemplate==3.0.1
urllib3==1.26.2
yamlordereddictloader==0.4.0
(venv) devnet@ubuntu:/opt/netbox$ more devices.yaml
Nx5548U-SSC:
driver: "nxos_ssh"
target: "10.44.141.2"
Nx5548U-FXP:
driver: "nxos_ssh"
target: "10.44.141.3"