What part provides the L shaped bracket that goes from the X carriage to the 'hot end'

[pkTux]

Looked through all the STL files & cannot establish if I am missing something, or just not familiar with the jargon.
i have all the X axis parts like idler, motor, X carriage, ready to print.

[RRP-support]

Hi
There's a list of printed parts required, related to the part number, on the first page of the instructions. See: https://reprappro.com/documentation/mendel-3/#Printing_parts_for_Mendel_3
I think you are talking about the nozzle mount (916): https://github.com/reprappro/Mendel-3/blob/master/STLs/916.STL
The part numbers are also listed in the list of parts for each section of the build, eg https://reprappro.com/documentation/mendel-3/z-axis-assembly/#Nozzle_Mount
Ian
RepRapPro tech support

[pkTux]

are you saying the part named ' nozzle mount' is what i need to reprint?

On Thu, Jul 2, 2015 at 5:09 AM, RRP-support notifications@github.com
wrote:

Hi
There's a list of printed parts required, related to the part number, on
the first page of the instructions. See:
https://reprappro.com/documentation/mendel-3/#Printing_parts_for_Mendel_3
Ian
RepRapPro tech support

—
Reply to this email directly or view it on GitHub
#6 (comment).

[RRP-support]

I don't know what you have printed, or what you want to print. I assumed you meant the X axis parts. The nozzle mount was missing from your initial list. The list I linked above shows all the parts you need, and that are used in building the Mendel. Click on the link in the table and you'll get a preview of the STL file. If you are looking for specific parts, look at that section of the instructions, write down the parts and/or part numbers, and refer to the list.
Ian
RepRapPro tech support