Mapping for HiTemp device is incorrect

[ip0her]

Hello!

I have HiTemp Wi-Fi device connected to my Termobrasa BI200GOLD water heating heat pump.

Android app for controlling heat pump from the phone is called HiTemp (v 1.3.7).

It allows to:

• Specify target temperature.
• Check the temperature at the top of the tank, at the bottom of the tank.
• Enable ventilation (high/low speed).
• Enable electric heating (by default it will heat with air). This setting is independent of the general mode of operation.
• Choose general mode of operation - intelligent, eco, hybrid, fast heating.
• turn on/off device completely.

And so on.

But when i am trying to use it through Home assistant, it:

• Does not react to ventilation commands.
• Has only two modes - "off" and "heating", and even when I try heating option, it shows that it is still off.
• Shows only one temperature, although others are available in diagnostics, so that is not big deal.
• Does not allow to specify target temperature (or does but through diagnostics, probably).
• Seems to display some of the parameters which are controlled as sensors (Intelligent control mode [H31]).
• Changes some settings to some values, without telling what value was there before. Since it might be incorrectly configured, I am hoping it did not changed nothing it shouldn't have changed.

I tried to collect some info to help fix the issue, but the app really does not play ball with packet sniffers on the login - just stops working. I managed to get some data on the getDataByCode though, and there is no issue with login anyway.

drive-download-20250408T175103Z-001.zip

component_log.txt
config_entry-aqua_temp-01JRAX40ZA2QM4SXMBQACCET3V.json

Can you please help me make it work?
Thank you!

[ip0her]

https://github.com/ip0her/aquatemp/blob/Custom-component/custom_components/aqua_temp/common/consts.py

Ok, I did a thing. It's very ugly, but at least now instead of sending "None" when I switch fan mode to "High" or "Off" it actually works.

I have no idea how to branch out of radical-squared main, so I could request a pull request for this atrocity, but I can at least show you what partially fixed the issue in my case - you can compare what is in my fork with what is in the main version.

[jpcs2012]

I have the same problem, i purchase a termobrasa 280 gold today and configure to home assistant but it shows always off and i cant change a thing, fan, temp or on/off state.
Anyone with solution??

[ip0her]

I made a fork, with it ventilation mode changes normally. For everything else I use a native app, because I don't need anything else anyway. Also use different accounts for Home assistant and that app - only one active session is allowed at a time.

[jpcs2012]

SELVED for me.
config\custom_components\aqua_temp\common\consts.py
config\custom_components\aqua_temp\parameters\mapping.1245226668902080512.json

consts.py
mapping.1245226668902080512.json