cant verify

[Chromewrecker]

when i try to verify the file in arduino i get this

C:\Users\Tim\Downloads\PortalGun-master\PortalGun-master\portalGun\portalGun.ino:32:22: fatal error: TimerOne.h: No such file or directory

#include <TimerOne.h>

                  ^

compilation terminated.

i have downloaded and installed the three listed libraries so im at a loss any thoughts.

[Chromewrecker]

i tried to do this in 1.6.4 and still get the same error. For some reason i am missing this <TimerOne.h> and im going to assume that the other two below this are missing but im not getting a error since the timer one is the highest concern

[Chromewrecker]

Also tried 1.6.8 same issue

[pomeroyb]

Do you have the TimerOne library installed?

Go to Sketch -> Include Library -> Manage Libraries...
Then in the "Filter your search" box, type "TimerOne"

I thought that this lib was installed by default, but if it isn't, I may have to update the README.

[Chromewrecker]

Hey thanks for the message back I found that but I can only get it to work in 1.6.4 the other versions have a ton of error messages. And I'm wondering if that is why I'm now having the issues I'm having. I wired the trinket to the pins that you have provided but only pin 9 only seems to have a function. I can turn the light on and off with the knob but the front lights do not work and the digital panel doesn't work either any thoughts or maybe a diagram thanks

[pomeroyb]

For LEDs, ensure that you have the long leg attached to the pin, then connect the short leg of the LED to the 150 ohm resistor, then connect the resistor to ground.

For the display, I'd suggest following the instructions here:
https://learn.adafruit.com/adafruit-led-backpack/0-54-alphanumeric
(But make sure you connect SCL and SDA to the i2C ports on the Trinket Pro (A5 and A4)

[Chromewrecker]

Ok awsome thanks for the info I'll give this a shot this weekend and let you know what I get thanks for the help

[Chromewrecker]

Ok so I can get the leds to work properly but the led panel won't work I have 4.49 volts going to both power pins I thought it was low but the adafruit website says it will work with 3volts I'm not sure why I can't find 5 volts. The button works since the leds turn on and off so I'm not sure why the panel won't work I have it set to a4 and a5 any thoughts

[Chromewrecker]

Quick update the panel work but it's dim and when the panel works the button won't turn the trinket off and the numbers won't change

[pomeroyb]

Can you run the AlphaNumeric demo to make sure the panel works in general?

https://learn.adafruit.com/adafruit-led-backpack/0-54-alphanumeric#load-demo

[Chromewrecker]

Ok I'll try that and one other thing I have noticed the green power light stays on when in sleep/power down mode is this normal and will this kill they battery. Thanks for the help so far. I also figured out why the panel was dim and wouldn't shut off. The issues now is the changing numbers and the power light I'll try the other demo in the morning