Won't run using 32-bit Raspberry Pi OS Trixie

[Ljsmithak]

Describe the bug
I recently reimaged my Raspberry PI 4 and now trying to restart the app for the first time. However, I'm getting an error message that says " 'Nonetype' object has no attribute 'width' " (see attached screen shot). Can you please tell me if there is anything I can do to set the missing attribute so I can get your app working again? I've run an older version of your app on this hardware configuration before and had no issues with it working. My screen is a 10 inch touch screen.

I'm running WFPICONSOLE v25.9.2 on the latest image of PI 4 just downloaded and updated today.

Thanks,
Larry Smith

To Reproduce
Steps to reproduce the behavior:

1. Go to '...'
2. Click on '....'
3. Scroll down to '....'
4. See error

Screenshots
If applicable, add screenshots to help explain your problem.

Hardware/OS/Version (please complete the following information):

• OS: [e.g. Raspberry Pi OS Bullseye]
• Hardware: [e.g. Pi3]
• Console Version: [e.g. 22.3.1]

Additional context
Add any other context about the problem here.

[peted-davis]

Please can you confirm exactly which OS you are using and whether it is 32 bit or 64 bit

[Ljsmithak]

Pete, See attached image for details of the version I've installed. I selected 32 bit OS on the imager but I can't be sure what is actually installed now. I haven't figured out how to confirm whether it be 32 bit or 64 bit OS. If you have any suggestions on this please let me know. Thanks, Larry Smith

…

On Thu, Oct 30, 2025 at 11:47 PM Pete Davis ***@***.***> wrote: *peted-davis* left a comment (peted-davis/WeatherFlow_PiConsole#165) <#165 (comment)> Please can you confirm exactly which OS you are using and whether it is 32 bit or 64 bit — Reply to this email directly, view it on GitHub <#165 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BCZOR7OLUVJQNLLFOL2VKUT32MHZDAVCNFSM6AAAAACKW4YSWGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTINZRGY3DMOJWGM> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[peted-davis]

Please run each of these commands in a terminal and let me know the output:
. /etc/os-release && echo $PRETTY_NAME
dpkg --print-architecture
cat /proc/device-tree/model

[Ljsmithak]

Here are the results from your three commands: Raspbian GNU/Linux 13 (trixie) (earlier commands gave V13.1) armhf Raspberry Pi 4 Model B Rev 1.5 Larry Smith

…

On Fri, Oct 31, 2025 at 11:55 AM Pete Davis ***@***.***> wrote: *peted-davis* left a comment (peted-davis/WeatherFlow_PiConsole#165) <#165 (comment)> Please run each of these commands in a terminal and let me know the output: . /etc/os-release && echo $PRETTY_NAME dpkg --print-architecture cat /proc/device-tree/model — Reply to this email directly, view it on GitHub <#165 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BCZOR7KYMXDSPLQAH4D4APL32O5E3AVCNFSM6AAAAACKW4YSWGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTINZUGY4TMNBYHE> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[peted-davis]

Thanks for the details. I've replicated your system and the answer is that the PiConsole is not compatible with the 32-bit version of Raspberry Pi OS Trixie. If you reinstall the 64 bit version then you should have no issues. I suspect you are the first person to try and install the 32-bit version as Trixie has only just been released, so thanks for bringing this to my attention!

[Ljsmithak]

Thanks Pete. Using the 64 bit version of Trixie worked. I'm up and running again.