Script openocd-prog-flash.sh doesn't work on AFCv3

[guilhermerc]

These are the logs: afcv3.log

[guilhermerc]

I increased openocd logs' level and executed openocd-prog-flash.sh both on AFCv3 and AFCv3.
These are the logs, again: afcs-logs.zip

[guilhermerc]

AFCv4 [1] uses Micron's MT25QL256ABA8ESF-0AAT [2] as FPGA's FLASH memory, whereas AFCv3 [3] uses Micron's N25Q256A13EF840E [4]. These devices share the same Manufacturer and Device IDs (0x19BA20) and openocd handles both the same [5]. However, the 4-BYTE PAGE PROGRAM (0x12) and 4-BYTE SECTOR ERASE (0xDC) commands aren't supported by N25Q256A13EF840E [4, pp. 29-31, note 14].

[1] AFCv4.0.2_LNLS_FOFB.PDF
[2] mt25q_qljs_l_256_aba_0.pdf
[3] AMC_FMC_Carrier_v3.1_LNLS_201709_BPM_.pdf
[4] n25q_256mb_3v.pdf
[5] https://github.com/openocd-org/openocd/blob/2e60e2eca9d06dcb99a4adb81ebe435a72ab0c7f/src/flash/nor/spi.c#L110

[guilhermerc]

A work-in-progress fix can be found at lnls-dig/openocd@master...fix-afcv3-flashing.

[guilhermerc]

openocd-org/openocd@5d6bf87 adds support for n25q256 flash. At that point, PAGE PROGRAM (0x02) and SECTOR ERASE (0xD8) commands were used, which are supported by N25Q256A13EF840E.

TODO: finish this comment