S3Sleep with UserX

[mechan1sm]

I installed the encryption and added User1 as described in README.md:

gunzip /usr/sedutil/UEFI64-*.img.gz

sedutil-cli --initialsetup PASSWORD /dev/nvme?
sedutil-cli --enablelockingrange 0 PASSWORD /dev/nvme?
sedutil-cli --setlockingrange 0 LK Admin1 PASSWORD /dev/nvme?
sedutil-cli --setmbrdone off Admin1 PASSWORD /dev/nvme?
sedutil-cli --loadpbaimage PASSWORD /usr/sedutil/UEFI64-*.img /dev/nvme?
sedutil-cli --setsidpassword PASSWORD PASSWORD /dev/nvme?
sedutil-cli --setmbrdone on Admin1 PASSWORD /dev/nvme?

sedutil-cli --setPassword ADMIN-PASSWORD User1 USER-PASSWORD /dev/nvme?
sedutil-cli --addUserToLockingACEs User1 ADMIN-PASSWORD /dev/nvme?
sedutil-cli --enableUser ADMIN-PASSWORD User1 /dev/nvme?

poweroff

I to do the unlocking after S3Sleep I can use

sedutil --prepareForS3Sleep 0 Admin1 <Admin1password> <device>

and it works fine.
But when I try to use User1 instead of Admin1

sedutil --prepareForS3Sleep 0 User1 <User1password> <device>

it doesn't work.
I tried to find information around this, but I didn't find it.
Is there any kind of solution?

[mechan1sm]

Just was re-setting up the encryption for same drive (Samsung 970 EVO Plus), and prepareForS3Sleep still doesn't work with UserX (at least, for global locking range)