[NEW SENSOR] Ash pan full

[d2ar3k]

Device Model

None

Other Device Model

No response

Sensor Name

No response

Entity Type

None

API Parameter Name

No response

Data Type

None

Unit of Measurement

%

Device Class

None

Additional Information

econet24.com Screenshot

No response

[jontofront]

Can you add a Diagnostic file? I need to find these parameter key in endpints

[d2ar3k]

Sure wt., 23 wrz 2025, 20:43 użytkownik jontofront ***@***.***> napisał:

…

*jontofront* left a comment (jontofront/ecoNET-300-Home-Assistant-Integration#181) <#181 (comment)> Can you add a Diagnostic file? I need to find these parameter key in endpints 882E510C-2E72-43F5-8142-87855DA0738A.png (view on web) <https://github.com/user-attachments/assets/8f88c617-706b-4677-b64e-eccbfcf18818> — Reply to this email directly, view it on GitHub <#181 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AXW64EYTH73YNDFTEW26WOL3UGIEFAVCNFSM6AAAAACGVGSDMOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTGMRVGE2DQOBYGU> . You are receiving this because you authored the thread.Message ID: <jontofront/ecoNET-300-Home-Assistant-Integration/issues/181/3325148885@ github.com>

[jontofront]

@d2ar3k Can you test 1.2.0 alfa version, maybe there will be this sensor

[d2ar3k]

Hi. I can try but need to be nack home. So maybe in few hours or likely tomorrow. No worries:) wt., 30 gru 2025, 13:11 użytkownik jontofront ***@***.***> napisał:

…

*jontofront* left a comment (jontofront/ecoNET-300-Home-Assistant-Integration#181) <#181 (comment)> @d2ar3k <https://github.com/d2ar3k> Can you test 1.2.0 alfa version, maybe there will be this sensor — Reply to this email directly, view it on GitHub <#181 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AXW64E5XWHFCQQX7MSB5SX34EJTWZAVCNFSM6AAAAACGVGSDMOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTMOJZGE3DAOJSG4> . You are receiving this because you were mentioned.Message ID: <jontofront/ecoNET-300-Home-Assistant-Integration/issues/181/3699160927@ github.com>

[d2ar3k]

Hey. Just tested it shortly. First of all after update most of entities ate not visible and i have to turn them on manually ... it is better to turn off unwanted entities than turn on all of them to check if they are working or no. Im not able to change mixer temperature. Im using the slider and its showing that temperature was changed but then automaticly is changing bact to old value. I did not found sensor of ash pan %load... maybe it is hidden between other sensors that i need to turn on manually:) But its awesome work. wt., 30 gru 2025, 14:59 użytkownik Jarosław W ***@***.***> napisał:

…

Hi. I can try but need to be nack home. So maybe in few hours or likely tomorrow. No worries:) wt., 30 gru 2025, 13:11 użytkownik jontofront ***@***.***> napisał: > *jontofront* left a comment > (jontofront/ecoNET-300-Home-Assistant-Integration#181) > <#181 (comment)> > > @d2ar3k <https://github.com/d2ar3k> Can you test 1.2.0 alfa version, > maybe there will be this sensor > > — > Reply to this email directly, view it on GitHub > <#181 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/AXW64E5XWHFCQQX7MSB5SX34EJTWZAVCNFSM6AAAAACGVGSDMOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTMOJZGE3DAOJSG4> > . > You are receiving this because you were mentioned.Message ID: > <jontofront/ecoNET-300-Home-Assistant-Integration/issues/181/3699160927@ > github.com> >

[jontofront]

Hey.
Just tested it shortly.
First of all after update most of entities ate not visible and i have to
turn them on manually ... it is better to turn off unwanted entities than
turn on all of them to check if they are working or no.
Im not able to change mixer temperature. Im using the slider and its
showing that temperature was changed but then automaticly is changing bact
to old value.

I did not found sensor of ash pan %load... maybe it is hidden between other
sensors that i need to turn on manually:)

But its awesome work.

wt., 30 gru 2025, 14:59 użytkownik Jarosław W @.***>
napisał:
…

Could you please send the Diagnostics file and attach it here?

I intentionally left most entities disabled, as they are boiler regulation / service parameters. I want to avoid situations where end users could accidentally misconfigure the boiler. The idea is that users should only enable the entities they understand and actually need.

The service parameters are unlocked, but they are hidden by default for safety reasons.

[d2ar3k]

It sounds good. Will try to do something later sob., 3 sty 2026, 10:12 użytkownik jontofront ***@***.***> napisał:

…

*jontofront* left a comment (jontofront/ecoNET-300-Home-Assistant-Integration#181) <#181 (comment)> Hey. Just tested it shortly. First of all after update most of entities ate not visible and i have to turn them on manually ... it is better to turn off unwanted entities than turn on all of them to check if they are working or no. Im not able to change mixer temperature. Im using the slider and its showing that temperature was changed but then automaticly is changing bact to old value. I did not found sensor of ash pan %load... maybe it is hidden between other sensors that i need to turn on manually:) But its awesome work. wt., 30 gru 2025, 14:59 użytkownik Jarosław W *@*.***> napisał: … <#m_316438435602825397_> Could you please send the Diagnostics file and attach it here? I intentionally left most entities disabled, as they are boiler regulation / service parameters. I want to avoid situations where end users could accidentally misconfigure the boiler. The idea is that users should only enable the entities they understand and actually need. The service parameters are unlocked, but they are hidden by default for safety reasons. — Reply to this email directly, view it on GitHub <#181 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AXW64EY7PJOWNOWDN5J6LW34E6BWVAVCNFSM6AAAAACGVGSDMOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTOMBWHEYTIOBQGE> . You are receiving this because you were mentioned.Message ID: <jontofront/ecoNET-300-Home-Assistant-Integration/issues/181/3706914801@ github.com>

[d2ar3k]

hi i tried two times to change mixer temp from 40 to 46 (using slider) as you can see on screenshoot. nothing happened, temperature stays on 40. Attached is diagnostic file. have fun [image: image.png] sob., 3 sty 2026 o 10:52 Jarosław W ***@***.***> napisał(a):

…

It sounds good. Will try to do something later sob., 3 sty 2026, 10:12 użytkownik jontofront ***@***.***> napisał: > *jontofront* left a comment > (jontofront/ecoNET-300-Home-Assistant-Integration#181) > <#181 (comment)> > > Hey. > Just tested it shortly. > First of all after update most of entities ate not visible and i have to > turn them on manually ... it is better to turn off unwanted entities than > turn on all of them to check if they are working or no. > Im not able to change mixer temperature. Im using the slider and its > showing that temperature was changed but then automaticly is changing bact > to old value. > > I did not found sensor of ash pan %load... maybe it is hidden between > other > sensors that i need to turn on manually:) > > But its awesome work. > > wt., 30 gru 2025, 14:59 użytkownik Jarosław W *@*.***> > napisał: > … <#m_5672730480230412511_m_316438435602825397_> > > Could you please send the Diagnostics file and attach it here? > > I intentionally left most entities disabled, as they are boiler > regulation / service parameters. I want to avoid situations where end users > could accidentally misconfigure the boiler. The idea is that users should > only enable the entities they understand and actually need. > > The service parameters are unlocked, but they are hidden by default for > safety reasons. > > — > Reply to this email directly, view it on GitHub > <#181 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/AXW64EY7PJOWNOWDN5J6LW34E6BWVAVCNFSM6AAAAACGVGSDMOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTOMBWHEYTIOBQGE> > . > You are receiving this because you were mentioned.Message ID: > <jontofront/ecoNET-300-Home-Assistant-Integration/issues/181/3706914801@ > github.com> >

[d2ar3k]

i also tried version 1.2.0a4 and same story... mixer is not changing value.... diagnostic attached and please do not use sliders, they are horrible to set temperature. please use dialog boxes instead of sliders .... always :) sob., 3 sty 2026 o 18:32 Jarosław W ***@***.***> napisał(a):

…

hi i tried two times to change mixer temp from 40 to 46 (using slider) as you can see on screenshoot. nothing happened, temperature stays on 40. Attached is diagnostic file. have fun [image: image.png] sob., 3 sty 2026 o 10:52 Jarosław W ***@***.***> napisał(a): > It sounds good. Will try to do something later > > sob., 3 sty 2026, 10:12 użytkownik jontofront ***@***.***> > napisał: > >> *jontofront* left a comment >> (jontofront/ecoNET-300-Home-Assistant-Integration#181) >> <#181 (comment)> >> >> Hey. >> Just tested it shortly. >> First of all after update most of entities ate not visible and i have to >> turn them on manually ... it is better to turn off unwanted entities than >> turn on all of them to check if they are working or no. >> Im not able to change mixer temperature. Im using the slider and its >> showing that temperature was changed but then automaticly is changing >> bact >> to old value. >> >> I did not found sensor of ash pan %load... maybe it is hidden between >> other >> sensors that i need to turn on manually:) >> >> But its awesome work. >> >> wt., 30 gru 2025, 14:59 użytkownik Jarosław W *@*.***> >> napisał: >> … <#m_-4866007635540274688_m_5672730480230412511_m_316438435602825397_> >> >> Could you please send the Diagnostics file and attach it here? >> >> I intentionally left most entities disabled, as they are boiler >> regulation / service parameters. I want to avoid situations where end users >> could accidentally misconfigure the boiler. The idea is that users should >> only enable the entities they understand and actually need. >> >> The service parameters are unlocked, but they are hidden by default for >> safety reasons. >> >> — >> Reply to this email directly, view it on GitHub >> <#181 (comment)>, >> or unsubscribe >> <https://github.com/notifications/unsubscribe-auth/AXW64EY7PJOWNOWDN5J6LW34E6BWVAVCNFSM6AAAAACGVGSDMOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTOMBWHEYTIOBQGE> >> . >> You are receiving this because you were mentioned.Message ID: >> <jontofront/ecoNET-300-Home-Assistant-Integration/issues/181/3706914801@ >> github.com> >> >