README.md

BerePi(Bere+RaspberryPi) Software System

• IoT big data collection and analytics software tool-kit based on RaspberryPi which is driven for IoT level computing system
• Software stack for physical computing and intelligent SW service based on IoT data collection & processing (Big data)
• is based on RaspberryPi distribution (hardware and software)
• supports Raspbian OS, Buster (ver 2019.09.12), with RaspBerryPi4 (input hangul mode, 한글모드)

Wiki doc

• RaspberryPi OS installation and setup to run the SDH sensors
• It shows basic installation process for Raspi Sensor System
  • BerePi Wiki
• Installation Image for RaspberryPi3 (2018.08)
  • http://tinyos.asuscomm.com:2081/open/2018_08_hawaii.zip

Contribution

• Jeonghoon Kang(https://github.com/jeonghoonkang), Philman Jeong(https://github.com/ipmstyle), Sukun Kim (https://github.com/sukunkim)

Wireless Sensor Network (WSN) using RaspberryPi

You can connect wireless sensors to your cyber space easily, just trying to add BerePi module sensor, to your RaspberryPi. BerePi project opens software which using BerePi hardware modules.

• Simple LED video 01 (YouTube : https://youtu.be/ygJ3qMiGQvw)
• BereCO2 HW module
• BereCO2 update with enclosure
  • 
  • 
• Previous Enclosure
  • BereCO2 update with SHT20 (KETI motes sensor board)
  • SHT20 board photo and connection : (https://raw.githubusercontent.com/jeonghoonkang/BerePi/master/files/Raspi_temp_humi_sht20_keti_motes_bd_00.jpg), (https://raw.githubusercontent.com/jeonghoonkang/BerePi/master/files/Raspi_temp_humi_sht20_keti_motes_bd_01.jpg)

Installation

• Please follow Wiki(https://github.com/jeonghoonkang/BerePi/wiki) to download and install pre-configured SD image
• Old Installation note
  • Download OS image and set up scripts and environemnt, automatically
  • https://github.com/jeonghoonkang/BerePi/blob/master/Install_Raspi_OS.md

Links

• nice additional external works :

1. http://www.raspberrypi-spy.co.uk/
2. http://www.raspberrypi-spy.co.uk/berryclip-6-led-add-on-board/berryclip-6-led-add-on-board-instructions/

• If you want to setup BerePi with your own Ubuntu Linux, please run below shell script files to setup packages, development environment
  • Raspi init setting : same in the installation instruction
    • please use, wget https://raw.githubusercontent.com/jeonghoonkang/BerePi/master/setup/init.sh
    • short URL is https://goo.gl/GDiYfN
    • It downloads init.sh file
    • download and run : source init.sh
  • Raspi2 PinOut:http://www.element14.com/community/docs/DOC-73950/l/raspberry-pi-2-model-b-gpio-40-pin-block-pinout