Register EID Wrapper for VBA application

[ThinkingOutsideTheBox]

Hello,
I need to get the latest version of the EID Wrapper for a VBA application. When Registering, I get an error as mentioned on the attached screenshot. How can I avoid this?

Thank you

[JohanRVT]

You started the x86 installer version on a x64 system, try the other one....

[ThinkingOutsideTheBox]

Hello Johan, Thank you for your prompt reaction. I tried to Register via the x64 map; however I have a 32-bit Office on a 64-bit Windows. I get some error messages, see the first screen shot. When trying to read a card in my Access application I get the error mentioned in the second screen shot. Jacques Van den broeck Engineering and Information technologies Logo-ToB-120329-Small Thinking Outside the Box av. des Campanules 44 B1170 Brussels - Belgium Tel.: Mobile: +32 (0)2 660 65 75 +32 (0)475 251 786 De : JohanRVT [mailto:notifications@github.com] Envoyé : mardi 22 mai 2018 15:03 À : jdt/EID.Wrapper Cc : ThinkingOutsideTheBox; Author Objet : Re: [jdt/EID.Wrapper] Register EID Wrapper for VBA application (#12) You started the x86 installer version on a x64 system, try the other one.... — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#12 (comment)> , or mute the thread <https://github.com/notifications/unsubscribe-auth/AKvDgIfukiQM-n7VRmvnY2VgiSqihUr_ks5t1AyOgaJpZM4UIkmk> . <https://github.com/notifications/beacon/AKvDgBbY2pSm4oj8tEGlbA5942mTxAdQks5t1AyOgaJpZM4UIkmk.gif>

[JohanRVT]

Your screenshot says otherwise, you have selected the EID.wrapper.register.exe in the x86 release map, you have to use that one in the x64 map. Just dubbelclick the right one and the rest comes automatic.

[ThinkingOutsideTheBox]

Johan,
I send my 2 screenshots. The first one indicates that I'm using the program EID.Wrapper.Register.exe from the x64 map. I clicked on it with Administration rights ... So, I do not understand your last mail.

[jdt]

It's a bit weird, but the version of the wrapper you need is related to the version of Office so if you are using a 32-bit version of Office you need the 32-bit wrapper. The error in your last screenshot indicates that you are using the 64-bit version of the wrapper with a 32-bit Office so you must use the 32-bit version of the wrapper.

As for the original error, did you start a command prompt as administrator and then run the exe from there? It is not always enough to be a local administrator when running the exe.

[ThinkingOutsideTheBox]

OK, Jesper. But, then I come back with my first request, which was:

Hello,
I need to get the latest version of the EID Wrapper for a VBA application. When Registering, I get an error as mentioned on the attached screenshot. How

can I avoid this?

[ThinkingOutsideTheBox]

Jesper, Just a confirmation about Administrator rights. Yes, I used Administrator rights when executing the program EID.Wrapper.Register.exe A first time with a right-click on the program and selecting Admin in the list (see first screen shot); a second time with Command prompt (Admin) see second screen shot.. Both give the same result … I must say that my Access application ran correctly with the Eid reader, until TaxOnWeb asked me to update the cardreader software … May be, this can give some solution idea … Thanks in advance. Jacques Van den broeck Logo-JVdb-small av. des Campanules 44 1170 Bruxelles Tél.: Portable: 02 660 65 75 0475 251 786 De : Jesper De Temmerman [mailto:notifications@github.com] Envoyé : mercredi 23 mai 2018 10:03 À : jdt/EID.Wrapper Cc : ThinkingOutsideTheBox; Comment Objet : Re: [jdt/EID.Wrapper] Register EID Wrapper for VBA application (#12) It's a bit weird, but the version of the wrapper you need is related to the version of Office so if you are using a 32-bit version of Office you need the 32-bit wrapper. The error in your last screenshot indicates that you are using the 64-bit version of the wrapper with a 32-bit Office so you must use the 32-bit version of the wrapper. As for the original error, did you start a command prompt as administrator and then run the exe from there? It is not always enough to be a local administrator when running the exe. — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#12 (comment)> , or mute the thread <https://github.com/notifications/unsubscribe-auth/AKvDgLm248HOyHF9OjlNLO6APVCS8gCEks5t1RepgaJpZM4UIkmk> . <https://github.com/notifications/beacon/AKvDgD2mrpNM2aV_XkY7SboAlpF0sxKlks5t1RepgaJpZM4UIkmk.gif>