Tuya window treatment shade range

[librehat]

Hi,

I've just recently purchased a zemismart window blind roller, thanks a lot for your edge driver, I'm able to control it from ST.

However, I noticed that only Open/Close (and the reverse direction setting) work correctly. The shade is always reported to be 50%, and changing it does nothing.

Separately, open/close will just go on forever (probably linked to the incorrect shade level report?).

My device ID is _TZE200_68nvbio9

Debug info

"<table style=\"font-size:0.6em;min-width:100%\"><tbody>\n        <tr><th align=\"left\" style=\"width:40%\">Manufacturer</th><td colspan=\"2\" style=\"width:60%\">_TZE200_68nvbio9</td></tr>\n        <tr><th align=\"left\">Model</th><td colspan=\"2\">TS0601</td></tr>\n        <tr><th align=\"left\">Endpoint</th><td colspan=\"2\">0x01</td></tr>\n        <tr><th align=\"left\">Device ID</th><td colspan=\"2\">0x0051</td></tr>\n        <tr><th align=\"left\">Profile ID</th><td colspan=\"2\">0x677C</td></tr>\n        <tr><th align=\"left\">Network ID</th><td colspan=\"2\">0x0104</td></tr>\n        <tr><th colspan=\"3\">Server Clusters</th></tr>\n        <tr><th align=\"left\">Groups</th><td>0x0004</td><td>0x01</td></tr><tr><th align=\"left\">Scenes</th><td>0x0005</td><td>0x01</td></tr><tr><th align=\"left\">TuyaEF00</th><td>0xEF00</td><td>0x01</td></tr><tr><th align=\"left\">Basic</th><td>0x0000</td><td>0x01</td></tr>\n        <tr><th colspan=\"3\">Client Clusters</th></tr>\n        <tr><th align=\"left\">Time</th><td>0x000A</td><td>0x01</td></tr><tr><th align=\"left\">OTAUpgrade</th><td>0x0019</td><td>0x01</td></tr>\n        \n      </tbody></table>"

Many Thanks

[librehat]

I think this is because I haven't set the limit (I currently don't have a remote).

I did find out that you can set the limits using ZigBee commands: https://community.home-assistant.io/t/zemismart-zm25-zigbee-howto-tubular-roller-blind-shade-cover-motor/474992/15

Based on what I see from SmartThings Developer documentation, I believe this would need custom capabilities to be added in order to easily set/unset the up and down limits.

[librehat]

Hey I managed to make it work in my WIP version based on Koenkk/zigbee-herdsman-converters#5563

Command x10 (16) can (un-)set the borders/limits depending on the values sent, though the "up" and "down" will have to take the "reverse" direction into consideration in the driver.

Separately, fncmd 13 carries the battery level information

[librehat]

Since I don't have any other devices myself to test, I've decided to make a separate driver: https://github.com/librehat/st-zemismart-window-treatment