Docker based deployment fails with provision.sh error

[tiendq]

Failed to deploy docker based testnet.

1. Pull latest code (here)
2. make run causes below error. It seems provision.sh doesn't work correctly. Script keeps showing this log.

g2m_btp_moonbeam | waiting for an other BTP to finish provisioning settings...
g2m_btp_icon    | 2021-10-29 09:17:42        API/INIT: RPC methods not decorated: debug_traceBlockByHash, debug_traceBlockByNumber, debug_traceTransaction
g2m_btp_icon    | 2021-10-29 09:17:42        METADATA: Unknown types found, no types for AssetRegistrarMetadata, AssetType, AuthorId, BlockV0, Collator2, CollatorSnapshot, CurrencyId, ExitQ, InflationInfo, Nominator2, NominatorAdded, OrderedSet, ParachainBondConfig, RegistrationInfo, RelayChainAccountId, RewardInfo, RoundInfo, VestingBlockNumber
g2m_btp_icon    | relay genesis hash:  0xb0a8d493285c2df73290dfb7e61f870f17b41801197a149ca93654499ea3dafe
g2m_btp_icon    | relay chain name:  "Kusama"
g2m_btp_icon    | para genesis hash:  0xde0ba5802ad6fc3758e5d18ba847c910ab94702359a76de94b18940de486d33a
g2m_btp_icon    | para chain name:  "Moonbase Development Testnet"
g2m_btp_icon    |  Get metadata of relay chain...
g2m_btp_moonbeam | waiting for an other BTP to finish provisioning settings...
g2m_btp_icon    |  Get metadata of para chain...
g2m_btp_moonbeam | waiting for an other BTP to finish provisioning settings...
g2m_btp_icon    | Done in 28.68s.
g2m_btp_icon    | parachain height:0x41 block_hash:0xb9ee93e624dacd599df0ac8bc19bec3da2a3ab818bc63158e6df854aae54f23c
g2m_btp_icon    | "0x9ee2c58efe222364b8a761050a90ccfef185d3f3f4d2fdf33941ed67ee8da26a"
g2m_btp_icon    | /entrypoint.sh: /btpsimple/scripts/provision.sh: line 97: --param: not found
g2m_btp_icon    | Usage: goloop rpc txresult HASH [flags]
g2m_btp_icon    | Error: accepts 1 arg(s), received 0
g2m_btp_icon    | Usage: goloop rpc txresult HASH [flags]
g2m_btp_icon    | Error: accepts 1 arg(s), received 0
g2m_btp_icon    | Usage: goloop rpc txresult HASH [flags]
g2m_btp_icon    | Error: accepts 1 arg(s), received 0
g2m_btp_moonbeam | waiting for an other BTP to finish provisioning settings...
g2m_btp_icon    | Usage: goloop rpc txresult HASH [flags]
g2m_btp_icon    | Error: accepts 1 arg(s), received 0
g2m_btp_icon    | Usage: goloop rpc txresult HASH [flags]
g2m_btp_icon    | Error: accepts 1 arg(s), received 0
g2m_btp_icon    | Usage: goloop rpc txresult HASH [flags]
g2m_btp_icon    | Error: accepts 1 arg(s), received 0
g2m_btp_icon    | Usage: goloop rpc txresult HASH [flags]
g2m_btp_icon    | Error: accepts 1 arg(s), received 0
g2m_btp_icon    | Usage: goloop rpc txresult HASH [flags]
g2m_btp_icon    | Error: accepts 1 arg(s), received 0
g2m_btp_icon    | Usage: goloop rpc txresult HASH [flags]
g2m_btp_icon    | Error: accepts 1 arg(s), received 0
g2m_btp_icon    | Usage: goloop rpc txresult HASH [flags]
g2m_btp_icon    | Error: accepts 1 arg(s), received 0
g2m_btp_icon    | Usage: goloop rpc txresult HASH [flags]
g2m_btp_icon    | Error: accepts 1 arg(s), received 0
g2m_btp_icon    | Usage: goloop rpc txresult HASH [flags]
g2m_btp_icon    | Error: accepts 1 arg(s), received 0
g2m_btp_icon    | Usage: goloop rpc txresult HASH [flags]
g2m_btp_icon    | Error: accepts 1 arg(s), received 0
g2m_btp_moonbeam | waiting for an other BTP to finish provisioning settings...
g2m_btp_icon    | Usage: goloop rpc txresult HASH [flags]
g2m_btp_icon    | Error: accepts 1 arg(s), received 0

[canhlinh]

@tiendq I've opened a PR to fix this issue.

@trmaphi When running docker-compose, I got this error.

Is there a new change on the contracts?

[tiendq]

Is there a new change on the contracts?

I guess there are changes in contracts, as far as I know they has spent at least last 2 weeks to fix several issues with Moonbeam's changes.

[Effort-Less]

Hiya was just wondering if this has been fixed as i seem to be having the same issue. When i try to run "make tansfer_icx" which runs this command "docker-compose exec btp_icon sh /btpsimple/scripts/transfer_icx.sh". All i seem to be getting back is "Provisioning not done yet". All of this happening while the g2m_btp_moonbeam it just keeps outputting:

g2m_btp_moonbeam | waiting for an other BTP to finish provisioning settings...
g2m_btp_icon | Error: jsonrpc: code: -31002, message: Pending, data:

[tiendq]

Hiya was just wondering if this has been fixed as i seem to be having the same issue. When i try to run "make tansfer_icx" which runs this command "docker-compose exec btp_icon sh /btpsimple/scripts/transfer_icx.sh". All i seem to be getting back is "Provisioning not done yet". All of this happening while the g2m_btp_moonbeam it just keeps outputting:

g2m_btp_moonbeam | waiting for an other BTP to finish provisioning settings... g2m_btp_icon | Error: jsonrpc: code: -31002, message: Pending, data:

waiting for an other BTP to finish provisioning settings often takes at most 20 minutes. If not, there is something wrong.

[canhlinh]

In the time starting docker-compose if the got any message like g2m_btp_icon | Error: jsonrpc: code: -31002, message: Pending, data: It means the BTP server is frozen. You have to re-run the docker-compose by command clean then start again.
This problem happens often if you use a MacBook. I suggest using an ubuntu pc instead.

[Effort-Less]

Hiya i am using a ubuntu machine to run this example :

"Distributor ID: Ubuntu
Description: Ubuntu 20.04.3 LTS
Release: 20.04
Codename: focal"

I was just wondering how to re run the docker-compose clean command you are talking off, as in order to get the BTP up and running all i do is run the command "make run". I assume that i need to change the makefile to include the clean command when we do the run.

[canhlinh]

No, Don't do that. Clean is clean. Run is run.
When developing, sometimes I just want to stop and run. Cleaning will make deployment restart from zero. It is a waste of time.

[Effort-Less]

Ok i understood your message @canhlinh i get that there is no point of me doing a clean. Still seem to be having the same issue even when waiting after 20 mins , as @tiendq suggested. I have attached a file which has the logs to g2m_btp_icon showing it gets jsonrpc : code -31002, after trying to deploy the kusmaDecoder. Also something else that looks a bit weird is when trying to exit out of the application, i get a read time out for g2m_goloop. Please do take a look at the error file i have linked down below.
error.txt

[canhlinh]

I've took a look onto your file. It's the same problem.

g2m_btp_icon    | Error: jsonrpc: code: -31002, message: Pending, data: <nil>
g2m_btp_moonbeam | waiting for an other BTP to finish provisioning settings...
g2m_btp_icon    | Error: jsonrpc: code: -31002, message: Pending, data: <nil>

Goloop got frozen once more. This error will never occur. If you're working on a powerful computer. I'm not sure why this is happening on a low-profile PC.

[Effort-Less]

Maybe i should increase docker cpu and the ram that is currently using from my machine?
Below i have listed all of the containers and there stats :
g2m_btp_moonbeam 0.00% 480KiB / 15.33GiB 0.00% 7.62kB / 0B 0B / 0B
g2m_btp_icon 0.00% 801.7MiB / 15.33GiB 5.11% 201MB / 4.24MB 54.4MB / 1.22GB 12
g2m_goloop 0.31% 176.7MiB / 15.33GiB 1.13% 141kB / 6.17kB 4.24MB / 9.19MB 38
g2m_moonbeam 6.00% 215.1MiB / 15.33GiB 1.37% 1.49MB / 3.34MB 3.29MB / 606kB 48

[canhlinh]

If you are using Ubuntu. There is no CPU limitation for running docker.
Only a limitation here is the power of your CPU.

Look at my CPU, i still got this problem when running Goloop.

[canhlinh]

But when running in a cloud VPS with higher CPU power. I never got this issue.

[canhlinh]

All containers are working fine. But Goloop is not able to mine new blocks. I don't know why. You can check it by make calling some API to Goloop container.