Verification error when flashing bootloader. #33
Description
When attempting to flash main.hex from the bootloader repository, avrdude throws the following error:
$avrdude -u -c usbtiny -p m328p -P usb -b 115200 -V -e -U flash:v:"C:\Users\tenkir\Downloads\USBaspLoader-plaid\USBaspLoader-plaid\firmware\main.hex":a
avrdude.exe: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.01s
avrdude.exe: Device signature = 0x1e950f (probably m328p)
avrdude.exe: erasing chip
avrdude.exe: verifying flash memory against C:\Users\tenkir\Downloads\USBaspLoader-plaid\USBaspLoader-plaid\firmware\main.hex:
avrdude.exe: load data flash data from input file C:\Users\tenkir\Downloads\USBaspLoader-plaid\USBaspLoader-plaid\firmware\main.hex:
avrdude.exe: input file C:\Users\tenkir\Downloads\USBaspLoader-plaid\USBaspLoader-plaid\firmware\main.hex auto detected as Intel Hex
avrdude.exe: input file C:\Users\tenkir\Downloads\USBaspLoader-plaid\USBaspLoader-plaid\firmware\main.hex contains 30868 bytes
avrdude.exe: reading on-chip flash data:
Reading | ################################################## | 100% -0.00s
avrdude.exe: verifying ...
avrdude.exe: verification error, first mismatch at byte 0x7000
0xff != 0x6b
avrdude.exe: verification error; content mismatch
avrdude.exe done. Thank you.
If I then attempt to put the keyboard into bootloader mode, all USB devices on the system stop working until the keyboard is unplugged,