LIST via telnet freezes without EMPTY-BUFFERS

[emelcher]

When repeated LIST commands are issued on the same block number, after between half a dozen times and a dozen times, display halts for a short time while printing the block and the next time o some time later freezes completely, requiring restart.

When EMTPY-BUFFERS is issued before each LIST it neither halts nor freezes.

ESP32forth v7.0.7.20 Revision: c5ac9b0 on ESP32C3 Dev Module esp 2.017

[emelcher]

The problem also occurs when EMTPY-BUFFERS is used, although less frequently.
The problem occurs when my Vodafone model CGA6444VF router is used for the WiFi connection. (The router is at less than 1 meter from the ESP32 device.)

Using my smartphone as WiFi router, the problem is not reproduced.

So, the problem may be caused by an unstable WiFi connection and the issue may be closed.