Hardware Test - ESP32-S3

[Chaaaaaaaaarlie]

ESP32-S3 confirmed not working. I guess due to small RAM.

ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x3 (RTC_SW_SYS_RST),boot:0x2a (SPI_FAST_FLASH_BOOT)
Saved PC:0x403cdac2
SPIWP:0xee

Writing at 0x000fc39b... (84 %)

A serial exception error occurred: Cannot configure port, something went wrong. Original message: PermissionError(13, 'The device does not recognize the command.', None, 22)
Note: This error originates from pySerial. It is likely not a problem with esptool, but with the hardware connection or drivers.
For troubleshooting steps visit: https://docs.espressif.com/projects/esptool/en/latest/troubleshooting.html
Failed uploading: uploading error: exit status 1

[DrFatalis]

hi,

I loaded it in a ESP32-S3-DevKitC-1-N16R8V this morning. No problem aside the uart driver than needed to be installed.
It is now connected to a Curtain 3 and working properly