1m3 3d printer

[MrGreenball]

• Parts Required
• Assembly
• Firmware
• Сalibration
• Printing

[mastercyb]

Waiting components.. Which one?

[MrGreenball]

Parts Required

Frame and portals

We will need a v-slot aluminum profile.

To assemble the frame:

• 2020 v-slot 1100 mm -8 pct
• 2040 v-slot 1200 mm - 4 pcs.

To build the XYZ portal:

• 2020 v-slot 1100 mm - 2 pct
• 2040 v-slot 1100 mm - 2 pct
• 2040 v-slot 1200 mm - 2 pct.

To connect Profile used T-nut.

To strengthen the frame I use aluminum plates at each corner.

For movement I use the OpenBuilds technology.

• V-wheel 24mm - 28 pct
  
  
  

• Spacers 6mm - 14 pct
  

• eccentric 6mm - 14 pct
  

Portal plates and motor mounts are printed on a 3D printer.

• 05_Y axis - 2 pct
  

Electronics

Power - network dc
Mainboard - BigTreeTech Skr V1.3
SensoryTFT35 V2.0 BigTreeTech
Stepper driver - LV8729 - 5 pct (1 safe)
Motor - Nema 17 - 4 pct
Limit switch - No-name - 3 pct
Hot end
Termistor
Silicon hot bed
Wire
Connectors

[MrGreenball]

Assembly

I have not chosen the optimal assembly path.
Frame - Y axis - X axis - Z axis - Motor - Wire - Motherboard - Dc

Assembled a frame from an aluminum profile.

[MrGreenball]

Firmware

I use the firmware Marlin 2.0.x alpha.
http://marlinfw.org/
For installation on a board I use PlatformIO. (instructions from the board manufacturer)
Using kinematics Core XY