Can't turn off the bubbles on a Airjet V1

[robindouglas]

I can turn the bubbles on and set Medium or High. But when switching to Off nothing happens.

I can turn it off via the Bestway app

[Tobbe7612]

I have the same issue. Get the following in the log:
custom_components.bestway.bestway.model
Källa: custom_components/bestway/bestway/model.py:124
integration: Bestway (dokumentation, ärenden)
Inträffade först: 15:45:55 (10 förekomster)
Senast loggade: 16:26:29

Unexpected API value 40 - assuming OFF

[TailGunR]

In the code, the Airjet V01 are expected to have a wave attribute of 50 or 51 for MEDIUM bubbles. I have noticed that if I set the bubbles to MEDIUM in the Bestway app it actually sets the wave attribute to 40.

The code treats a value of 40 as an unexpected value and assumes the bubbles are off. This would be stopping you from then turning the bubbles off. It might work if you set the bubbles to max and then turn them off after a minute or so.

I changed the code on my home assistant server to allow wave = 40 or wave = 41 (rounding error) to be treated as MEDIUM. This can be done in the model.py file on line 129.

Old Code:
AIRJET_V01_BUBBLES_MAP = BubblesMapping(BV(0), BV(50, [50, 51]), BV(100))

New Code:
AIRJET_V01_BUBBLES_MAP = BubblesMapping(BV(0), BV(50, [40, 41, 50, 51]), BV(100))

[Tobbe7612]

@TailGunR : I will try this code change, thank you for posting this

[lazmo88]

Has anyone managed to patch this bug? Just noticed this same issue on Airjet V01.

[TailGunR]

I think a proper solution will be to have wave between 1 and 75 as MEDIUM and 76 to 100 as HIGH. The spa is obviously happy to have the wave value set to 50 or 40 without issue, so when the bubbles are turned on by this integration we can continue to set the wave value to 50 for MEDIUM and 100 for HIGH.

[cdpuk]

Is someone able to try this again in v1.8.2? There have been some changes which will affect this, but I'm not 100% whether it's a complete fix. Thanks.

[TailGunR]

I updated to 1.8.1 and have not had any issues. I can't see a 1.8.2 in HACs yet. I'll do some testing later today