Timed command to set HMI_dimOpen not working

[CybDis]

hi,
please help, I'm struggling with a timer based setting.
I want to send HMI_dimOpen 0 in the morning and 1 in the evening.

I changed nspanel.be as following:

def dimnight()
  nsp.send('{"HMI_dimOpen": 1}')
  print("DimNight called")
end

def dimday()
  nsp.send('{"HMI_dimOpen": 0}')
  print("DimDay called")
end

tasmota.add_rule("Time#Minute=360", dimday)
tasmota.add_rule("Time#Minute=1290", dimnight)

I can see the command being sent in the console, but nothing else happened.
For debugging purposes I chaned it to call DimNight every minute, here is the console:

20:40:00.846 NSP: Sent = {"year":2022,"mon":4,"day":6,"hour":20,"min":40,"week":3}
20:40:00.936 NSP: Sent = {"HMI_dimOpen": 1}
20:40:00.959 DimNight called
20:41:00.859 NSP: Sent = {"year":2022,"mon":4,"day":6,"hour":20,"min":41,"week":3}

But nothing changes, display stays on.

Sending that payload via NSPSend via console, it works.

What's what I am doing wrong?

[blakadder]

try calling with tasmota.add_rule("Time#Minute=360", /-> dimday())

[CybDis]

that made it worse, device didn't connect to MQTT server anymore and nothing happened.

I think I found then problem: there's a space in the json Infront of the 0 and 1 - even tough its valid json, the Panel doesnt seem to like it.

Now I'm struggling with the time - is the #minute=xxx local time or from gmt?