diff --git a/src/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md b/src/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md index df9ed3a38..099a8a20c 100644 --- a/src/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md +++ b/src/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md @@ -401,7 +401,7 @@ WITH SINK ( ``` -## 4. Reference: Notes +## Reference: Notes You can adjust the parameters for data synchronization by modifying the IoTDB configuration file (`iotdb-system.properties`), such as the directory for storing synchronized data. The complete configuration is as follows: @@ -464,9 +464,9 @@ pipe_sink_max_client_number=16 pipe_all_sinks_rate_limit_bytes_per_second=-1 ``` -## 5. Reference: Parameter Description +## Reference: Parameter Description -### 5.1 source parameter +### source parameter | **Parameter** | **Description** | **Value Range** | **Required** | **Default Value** | | :----------------------- | :----------------------------------------------------------- | :----------------------------------------------------------- | :----------- | :---------------------------------------------------------- | @@ -485,9 +485,9 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 > - True (recommended): Under this value, the task will process and send the data in real-time. Its characteristics are high timeliness and low throughput. > - False: Under this value, the task will process and send the data in batches (according to the underlying data files). Its characteristics are low timeliness and high throughput. -### 5.2 sink parameter +### sink parameter -#### 5.2.1 iotdb-thrift-sink +#### iotdb-thrift-sink | **Parameter** | **Description** | Value Range | Required | Default Value | | :-------------------------- | :----------------------------------------------------------- | :----------------------------------------------------------- | :------- | :------------ | @@ -502,7 +502,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | | rate-limit-bytes-per-second | The maximum number of bytes allowed to be transmitted per second. The compressed bytes (such as after compression) are calculated. If it is less than 0, there is no limit. | Double: [Double.MIN_VALUE, Double.MAX_VALUE] | No | -1 | -#### 5.2.2 iotdb-thrift-ssl-sink +#### iotdb-thrift-ssl-sink | **Parameter** | **Description** | Value Range | Required | Default Value | diff --git a/src/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md b/src/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md index 655087533..e83839207 100644 --- a/src/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md +++ b/src/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md @@ -189,8 +189,8 @@ Detailed introduction of pre-installed plugins is as follows (for detailed param Default processor plugin that does not process incoming data. - sink Plugin - Supported + sink Plugin + Supported do-nothing-sink Does not process outgoing data. @@ -206,6 +206,14 @@ Detailed introduction of pre-installed plugins is as follows (for detailed param iotdb-thrift-ssl-sink Used for data transmission between IoTDB instances (V2.0.0+). Uses Thrift RPC framework with a multi-threaded sync blocking IO model, suitable for high-security scenarios. + + write-back-sink + A data write-back plugin for IoTDB (V2.0.2 and above) to achieve the effect of materialized views. + + + opc-ua-sink + An OPC UA protocol data transfer plugin for IoTDB (V2.0.2 and above), supporting both Client/Server and Pub/Sub communication modes. + @@ -418,7 +426,7 @@ WITH SINK ( ) ``` -## 4. Reference: Notes +## Reference: Notes You can adjust the parameters for data synchronization by modifying the IoTDB configuration file (`iotdb-system.properties`), such as the directory for storing synchronized data. The complete configuration is as follows: @@ -491,9 +499,9 @@ pipe_air_gap_receiver_port=9780 pipe_all_sinks_rate_limit_bytes_per_second=-1 ``` -## 5. Reference: Parameter Description +## Reference: Parameter Description -### 5.1 source parameter +### source parameter | **Parameter** | **Description** | **Value Range** | **Required** | **Default Value** | | :----------------------- | :----------------------------------------------------------- | :----------------------------------------------------------- | :----------- | :---------------------------------------------------------- | @@ -512,9 +520,9 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 > - True (recommended): Under this value, the task will process and send the data in real-time. Its characteristics are high timeliness and low throughput. > - False: Under this value, the task will process and send the data in batches (according to the underlying data files). Its characteristics are low timeliness and high throughput. -### 5.2 sink parameter +### sink parameter -#### 5.2.1 iotdb-thrift-sink +#### iotdb-thrift-sink | **Parameter** | **Description** | Value Range | Required | Default Value | | :-------------------------- | :----------------------------------------------------------- | :----------------------------------------------------------- | :------- | :------------ | @@ -529,7 +537,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | | rate-limit-bytes-per-second | The maximum number of bytes allowed to be transmitted per second. The compressed bytes (such as after compression) are calculated. If it is less than 0, there is no limit. | Double: [Double.MIN_VALUE, Double.MAX_VALUE] | No | -1 | -#### 5.2.2 iotdb-air-gap-sink +#### iotdb-air-gap-sink | **Parameter** | **Description** | Value Range | Required | Default Value | | :--------------------------- | :----------------------------------------------------------- | :----------------------------------------------------------- | :------- | :------------ | @@ -542,7 +550,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | rate-limit-bytes-per-second | The maximum number of bytes allowed to be transmitted per second. The compressed bytes (such as after compression) are calculated. If it is less than 0, there is no limit. | Double: [Double.MIN_VALUE, Double.MAX_VALUE] | No | -1 | | air-gap.handshake-timeout-ms | The timeout duration for the handshake requests when the sender and receiver attempt to establish a connection for the first time, in milliseconds. | Integer | No | 5000 | -#### 5.2.3 iotdb-thrift-ssl-sink +#### iotdb-thrift-ssl-sink | **Parameter** | **Description** | Value Range | Required | Default Value | | :-------------------------- | :----------------------------------------------------------- | :----------------------------------------------------------- | :------- | :------------ | @@ -557,4 +565,24 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | | rate-limit-bytes-per-second | Maximum bytes allowed per second for transmission (calculated after compression). Set to a value less than 0 for no limit. | Double: [Double.MIN_VALUE, Double.MAX_VALUE] | No | -1 | | ssl.trust-store-path | Path to the trust store certificate for SSL connection. | String.Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667' | Yes | - | -| ssl.trust-store-pwd | Password for the trust store certificate. | Integer | Yes | - | \ No newline at end of file +| ssl.trust-store-pwd | Password for the trust store certificate. | Integer | Yes | - | + +#### write-back-sink + +| **Parameter** | **Description** | **value Range** | **Required** | **Default Value** | +| ---------------------------- | ------------------------------------------------------------ | ------------------------------------------------------------ | -------- |--------------| +| sink | write-back-sink | String: write-back-sink | Yes | - | + +#### opc-ua-sink + +| **Parameter** | **Description** |Value Range | Required | Default Value | +|:-------------------------------------|:-------------------------------------------------------------------------------------------------------| :------------------------------------- |:-------------|:------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| +| sink | opc-ua-sink | String: opc-ua-sink | Yes | - | +| sink.opcua.model | OPC UA model used | String: client-server / pub-sub | No | pub-sub | +| sink.opcua.tcp.port | OPC UA's TCP port | Integer: [0, 65536] | No | 12686 | +| sink.opcua.https.port | OPC UA's HTTPS port | Integer: [0, 65536] | No | 8443 | +| sink.opcua.security.dir | Directory for OPC UA's keys and certificates | String: Path, supports absolute and relative directories | No | Opc_security folder``in the conf directory of the DataNode related to iotdb
If there is no conf directory for iotdb (such as launching DataNode in IDEA), it will be the iotdb_opc_Security folder``in the user's home directory | +| sink.opcua.enable-anonymous-access | Whether OPC UA allows anonymous access | Boolean | No | true | +| sink.user | User for OPC UA, specified in the configuration | String | No | root | +| sink.password | Password for OPC UA, specified in the configuration | String | No | root | +| sink.opcua.placeholder | A placeholder string used to substitute for null mapping paths when the value of the ID column is null | String | Optional | "null" | \ No newline at end of file diff --git a/src/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md b/src/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md index df9ed3a38..099a8a20c 100644 --- a/src/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md +++ b/src/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md @@ -401,7 +401,7 @@ WITH SINK ( ``` -## 4. Reference: Notes +## Reference: Notes You can adjust the parameters for data synchronization by modifying the IoTDB configuration file (`iotdb-system.properties`), such as the directory for storing synchronized data. The complete configuration is as follows: @@ -464,9 +464,9 @@ pipe_sink_max_client_number=16 pipe_all_sinks_rate_limit_bytes_per_second=-1 ``` -## 5. Reference: Parameter Description +## Reference: Parameter Description -### 5.1 source parameter +### source parameter | **Parameter** | **Description** | **Value Range** | **Required** | **Default Value** | | :----------------------- | :----------------------------------------------------------- | :----------------------------------------------------------- | :----------- | :---------------------------------------------------------- | @@ -485,9 +485,9 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 > - True (recommended): Under this value, the task will process and send the data in real-time. Its characteristics are high timeliness and low throughput. > - False: Under this value, the task will process and send the data in batches (according to the underlying data files). Its characteristics are low timeliness and high throughput. -### 5.2 sink parameter +### sink parameter -#### 5.2.1 iotdb-thrift-sink +#### iotdb-thrift-sink | **Parameter** | **Description** | Value Range | Required | Default Value | | :-------------------------- | :----------------------------------------------------------- | :----------------------------------------------------------- | :------- | :------------ | @@ -502,7 +502,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | | rate-limit-bytes-per-second | The maximum number of bytes allowed to be transmitted per second. The compressed bytes (such as after compression) are calculated. If it is less than 0, there is no limit. | Double: [Double.MIN_VALUE, Double.MAX_VALUE] | No | -1 | -#### 5.2.2 iotdb-thrift-ssl-sink +#### iotdb-thrift-ssl-sink | **Parameter** | **Description** | Value Range | Required | Default Value | diff --git a/src/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md b/src/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md index 655087533..e83839207 100644 --- a/src/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md +++ b/src/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md @@ -189,8 +189,8 @@ Detailed introduction of pre-installed plugins is as follows (for detailed param Default processor plugin that does not process incoming data. - sink Plugin - Supported + sink Plugin + Supported do-nothing-sink Does not process outgoing data. @@ -206,6 +206,14 @@ Detailed introduction of pre-installed plugins is as follows (for detailed param iotdb-thrift-ssl-sink Used for data transmission between IoTDB instances (V2.0.0+). Uses Thrift RPC framework with a multi-threaded sync blocking IO model, suitable for high-security scenarios. + + write-back-sink + A data write-back plugin for IoTDB (V2.0.2 and above) to achieve the effect of materialized views. + + + opc-ua-sink + An OPC UA protocol data transfer plugin for IoTDB (V2.0.2 and above), supporting both Client/Server and Pub/Sub communication modes. + @@ -418,7 +426,7 @@ WITH SINK ( ) ``` -## 4. Reference: Notes +## Reference: Notes You can adjust the parameters for data synchronization by modifying the IoTDB configuration file (`iotdb-system.properties`), such as the directory for storing synchronized data. The complete configuration is as follows: @@ -491,9 +499,9 @@ pipe_air_gap_receiver_port=9780 pipe_all_sinks_rate_limit_bytes_per_second=-1 ``` -## 5. Reference: Parameter Description +## Reference: Parameter Description -### 5.1 source parameter +### source parameter | **Parameter** | **Description** | **Value Range** | **Required** | **Default Value** | | :----------------------- | :----------------------------------------------------------- | :----------------------------------------------------------- | :----------- | :---------------------------------------------------------- | @@ -512,9 +520,9 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 > - True (recommended): Under this value, the task will process and send the data in real-time. Its characteristics are high timeliness and low throughput. > - False: Under this value, the task will process and send the data in batches (according to the underlying data files). Its characteristics are low timeliness and high throughput. -### 5.2 sink parameter +### sink parameter -#### 5.2.1 iotdb-thrift-sink +#### iotdb-thrift-sink | **Parameter** | **Description** | Value Range | Required | Default Value | | :-------------------------- | :----------------------------------------------------------- | :----------------------------------------------------------- | :------- | :------------ | @@ -529,7 +537,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | | rate-limit-bytes-per-second | The maximum number of bytes allowed to be transmitted per second. The compressed bytes (such as after compression) are calculated. If it is less than 0, there is no limit. | Double: [Double.MIN_VALUE, Double.MAX_VALUE] | No | -1 | -#### 5.2.2 iotdb-air-gap-sink +#### iotdb-air-gap-sink | **Parameter** | **Description** | Value Range | Required | Default Value | | :--------------------------- | :----------------------------------------------------------- | :----------------------------------------------------------- | :------- | :------------ | @@ -542,7 +550,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | rate-limit-bytes-per-second | The maximum number of bytes allowed to be transmitted per second. The compressed bytes (such as after compression) are calculated. If it is less than 0, there is no limit. | Double: [Double.MIN_VALUE, Double.MAX_VALUE] | No | -1 | | air-gap.handshake-timeout-ms | The timeout duration for the handshake requests when the sender and receiver attempt to establish a connection for the first time, in milliseconds. | Integer | No | 5000 | -#### 5.2.3 iotdb-thrift-ssl-sink +#### iotdb-thrift-ssl-sink | **Parameter** | **Description** | Value Range | Required | Default Value | | :-------------------------- | :----------------------------------------------------------- | :----------------------------------------------------------- | :------- | :------------ | @@ -557,4 +565,24 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | | rate-limit-bytes-per-second | Maximum bytes allowed per second for transmission (calculated after compression). Set to a value less than 0 for no limit. | Double: [Double.MIN_VALUE, Double.MAX_VALUE] | No | -1 | | ssl.trust-store-path | Path to the trust store certificate for SSL connection. | String.Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667' | Yes | - | -| ssl.trust-store-pwd | Password for the trust store certificate. | Integer | Yes | - | \ No newline at end of file +| ssl.trust-store-pwd | Password for the trust store certificate. | Integer | Yes | - | + +#### write-back-sink + +| **Parameter** | **Description** | **value Range** | **Required** | **Default Value** | +| ---------------------------- | ------------------------------------------------------------ | ------------------------------------------------------------ | -------- |--------------| +| sink | write-back-sink | String: write-back-sink | Yes | - | + +#### opc-ua-sink + +| **Parameter** | **Description** |Value Range | Required | Default Value | +|:-------------------------------------|:-------------------------------------------------------------------------------------------------------| :------------------------------------- |:-------------|:------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| +| sink | opc-ua-sink | String: opc-ua-sink | Yes | - | +| sink.opcua.model | OPC UA model used | String: client-server / pub-sub | No | pub-sub | +| sink.opcua.tcp.port | OPC UA's TCP port | Integer: [0, 65536] | No | 12686 | +| sink.opcua.https.port | OPC UA's HTTPS port | Integer: [0, 65536] | No | 8443 | +| sink.opcua.security.dir | Directory for OPC UA's keys and certificates | String: Path, supports absolute and relative directories | No | Opc_security folder``in the conf directory of the DataNode related to iotdb
If there is no conf directory for iotdb (such as launching DataNode in IDEA), it will be the iotdb_opc_Security folder``in the user's home directory | +| sink.opcua.enable-anonymous-access | Whether OPC UA allows anonymous access | Boolean | No | true | +| sink.user | User for OPC UA, specified in the configuration | String | No | root | +| sink.password | Password for OPC UA, specified in the configuration | String | No | root | +| sink.opcua.placeholder | A placeholder string used to substitute for null mapping paths when the value of the ID column is null | String | Optional | "null" | \ No newline at end of file diff --git a/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md b/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md index 20e2a316b..abd3f7f67 100644 --- a/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md +++ b/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md @@ -199,7 +199,7 @@ IoTDB> SHOW PIPEPLUGINS iotdb-thrift-ssl-sink 用于 IoTDB 与 IoTDB（V2.0.0 及以上）之间的数据传输。使用 Thrift RPC 框架传输数据，多线程 sync blocking IO 模型，适用于安全需求较高的场景 - + @@ -509,4 +509,4 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 | | rate-limit-bytes-per-second | 每秒最大允许传输的 byte 数，计算压缩后的 byte（如压缩），若小于 0 则不限制 | Double: [Double.MIN_VALUE, Double.MAX_VALUE] | 选填 | -1 | | ssl.trust-store-path | 连接目标端 DataNode 所需的 trust store 证书路径 | String.Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667' | 必填 | - | -| ssl.trust-store-pwd | 连接目标端 DataNode 所需的 trust store 证书密码 | Integer | 必填 | - | \ No newline at end of file +| ssl.trust-store-pwd | 连接目标端 DataNode 所需的 trust store 证书密码 | Integer | 必填 | - | diff --git a/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md b/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md index fc65c8d9f..7a9f52dfd 100644 --- a/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md +++ b/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md @@ -188,8 +188,8 @@ IoTDB> SHOW PIPEPLUGINS 默认的 processor 插件，不对传入的数据做任何的处理 - sink 插件 - 支持 + sink 插件 + 支持 do-nothing-sink 不对发送出的数据做任何的处理 @@ -205,6 +205,14 @@ IoTDB> SHOW PIPEPLUGINS iotdb-thrift-ssl-sink 用于 IoTDB 与 IoTDB（V2.0.0 及以上）之间的数据传输。使用 Thrift RPC 框架传输数据，多线程 sync blocking IO 模型，适用于安全需求较高的场景 + + write-back-sink + 用于 IoTDB （V2.0.2 及以上）的数据回写插件，实现物化视图的作用。 + + + opc-ua-sink + 用于 IoTDB （V2.0.2 及以上）支持OPC UA协议的数据传输插件，支持Client/Server 和 Pub/Sub 两种通信模式。 + @@ -565,4 +573,24 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 | | rate-limit-bytes-per-second | 每秒最大允许传输的 byte 数，计算压缩后的 byte（如压缩），若小于 0 则不限制 | Double: [Double.MIN_VALUE, Double.MAX_VALUE] | 选填 | -1 | | ssl.trust-store-path | 连接目标端 DataNode 所需的 trust store 证书路径 | String.Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667' | 必填 | - | -| ssl.trust-store-pwd | 连接目标端 DataNode 所需的 trust store 证书密码 | Integer | 必填 | - | \ No newline at end of file +| ssl.trust-store-pwd | 连接目标端 DataNode 所需的 trust store 证书密码 | Integer | 必填 | - | + +#### write-back-sink + +| **参数** | **描述** | **value 取值范围** | **是否必填** | **默认取值** | +| ---------------------------- | ------------------------------------------------------------ | ------------------------------------------------------------ | -------- | -------- | +| sink | write-back-sink | String: write-back-sink | 必填 | - | + +#### opc-ua-sink + +| **参数** | **描述** | **value 取值范围** | **是否必填** | **默认值** | +|------------------------------------|----------------------------------|-----------------------------| ---------- |--------------------------------------------------------------------------------------------------------------------------------------------------------------------------| +| sink | OPC UA SINK | String: opc-ua-sink | 必填 | - | +| sink.opcua.model | OPC UA 使用的模式 | String: client-server / pub-sub | 选填 | pub-sub | +| sink.opcua.tcp.port | OPC UA 的 TCP 端口 | Integer: [0, 65536] | 选填 | 12686 | +| sink.opcua.https.port | OPC UA 的 HTTPS 端口 | Integer: [0, 65536] | 选填 | 8443 | +| sink.opcua.security.dir | OPC UA 的密钥及证书目录 | String: Path，支持绝对及相对目录 | 选填 | iotdb 相关 DataNode 的 conf 目录下的 opc_security 文件夹 ``。
如无 iotdb 的 conf 目录（例如 IDEA 中启动 DataNode），则为用户主目录下的 iotdb_opc_security 文件夹 `` | +| sink.opcua.enable-anonymous-access | OPC UA 是否允许匿名访问 | Boolean | 选填 | true | +| sink.user | 用户，这里指 OPC UA 的允许用户 | String | 选填 | root | +| sink.password | 密码，这里指 OPC UA 的允许密码 | String | 选填 | root | +| sink.opcua.placeholder | 当ID列的值出现null时，用于替代null映射路径的占位字符串 | String | 选填 | "null" | \ No newline at end of file diff --git a/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md b/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md index 20e2a316b..abd3f7f67 100644 --- a/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md +++ b/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md @@ -199,7 +199,7 @@ IoTDB> SHOW PIPEPLUGINS iotdb-thrift-ssl-sink 用于 IoTDB 与 IoTDB（V2.0.0 及以上）之间的数据传输。使用 Thrift RPC 框架传输数据，多线程 sync blocking IO 模型，适用于安全需求较高的场景 - + @@ -509,4 +509,4 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 | | rate-limit-bytes-per-second | 每秒最大允许传输的 byte 数，计算压缩后的 byte（如压缩），若小于 0 则不限制 | Double: [Double.MIN_VALUE, Double.MAX_VALUE] | 选填 | -1 | | ssl.trust-store-path | 连接目标端 DataNode 所需的 trust store 证书路径 | String.Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667' | 必填 | - | -| ssl.trust-store-pwd | 连接目标端 DataNode 所需的 trust store 证书密码 | Integer | 必填 | - | \ No newline at end of file +| ssl.trust-store-pwd | 连接目标端 DataNode 所需的 trust store 证书密码 | Integer | 必填 | - | diff --git a/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md b/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md index fc65c8d9f..7a9f52dfd 100644 --- a/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md +++ b/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md @@ -188,8 +188,8 @@ IoTDB> SHOW PIPEPLUGINS 默认的 processor 插件，不对传入的数据做任何的处理 - sink 插件 - 支持 + sink 插件 + 支持 do-nothing-sink 不对发送出的数据做任何的处理 @@ -205,6 +205,14 @@ IoTDB> SHOW PIPEPLUGINS iotdb-thrift-ssl-sink 用于 IoTDB 与 IoTDB（V2.0.0 及以上）之间的数据传输。使用 Thrift RPC 框架传输数据，多线程 sync blocking IO 模型，适用于安全需求较高的场景 + + write-back-sink + 用于 IoTDB （V2.0.2 及以上）的数据回写插件，实现物化视图的作用。 + + + opc-ua-sink + 用于 IoTDB （V2.0.2 及以上）支持OPC UA协议的数据传输插件，支持Client/Server 和 Pub/Sub 两种通信模式。 + @@ -565,4 +573,24 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 | | rate-limit-bytes-per-second | 每秒最大允许传输的 byte 数，计算压缩后的 byte（如压缩），若小于 0 则不限制 | Double: [Double.MIN_VALUE, Double.MAX_VALUE] | 选填 | -1 | | ssl.trust-store-path | 连接目标端 DataNode 所需的 trust store 证书路径 | String.Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667' | 必填 | - | -| ssl.trust-store-pwd | 连接目标端 DataNode 所需的 trust store 证书密码 | Integer | 必填 | - | \ No newline at end of file +| ssl.trust-store-pwd | 连接目标端 DataNode 所需的 trust store 证书密码 | Integer | 必填 | - | + +#### write-back-sink + +| **参数** | **描述** | **value 取值范围** | **是否必填** | **默认取值** | +| ---------------------------- | ------------------------------------------------------------ | ------------------------------------------------------------ | -------- | -------- | +| sink | write-back-sink | String: write-back-sink | 必填 | - | + +#### opc-ua-sink + +| **参数** | **描述** | **value 取值范围** | **是否必填** | **默认值** | +|------------------------------------|----------------------------------|-----------------------------| ---------- |--------------------------------------------------------------------------------------------------------------------------------------------------------------------------| +| sink | OPC UA SINK | String: opc-ua-sink | 必填 | - | +| sink.opcua.model | OPC UA 使用的模式 | String: client-server / pub-sub | 选填 | pub-sub | +| sink.opcua.tcp.port | OPC UA 的 TCP 端口 | Integer: [0, 65536] | 选填 | 12686 | +| sink.opcua.https.port | OPC UA 的 HTTPS 端口 | Integer: [0, 65536] | 选填 | 8443 | +| sink.opcua.security.dir | OPC UA 的密钥及证书目录 | String: Path，支持绝对及相对目录 | 选填 | iotdb 相关 DataNode 的 conf 目录下的 opc_security 文件夹 ``。
如无 iotdb 的 conf 目录（例如 IDEA 中启动 DataNode），则为用户主目录下的 iotdb_opc_security 文件夹 `` | +| sink.opcua.enable-anonymous-access | OPC UA 是否允许匿名访问 | Boolean | 选填 | true | +| sink.user | 用户，这里指 OPC UA 的允许用户 | String | 选填 | root | +| sink.password | 密码，这里指 OPC UA 的允许密码 | String | 选填 | root | +| sink.opcua.placeholder | 当ID列的值出现null时，用于替代null映射路径的占位字符串 | String | 选填 | "null" | \ No newline at end of file