diff --git a/.zuul.yaml b/.zuul.yaml
new file mode 100644
index 0000000..3f1c01c
--- /dev/null
+++ b/.zuul.yaml
@@ -0,0 +1,11 @@
+- job:
+    name: network-vyos-test
+    parent: ansible-network-vyos-base
+    run: tests/foo.yaml
+    required-projects:
+      - name: github.com/ansible/ansible
+
+- project:
+    check:
+      jobs:
+        - network-vyos-test
diff --git a/LICENSE.txt b/LICENSE.txt
new file mode 100644
index 0000000..f288702
--- /dev/null
+++ b/LICENSE.txt
@@ -0,0 +1,674 @@
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
+
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Use with the GNU Affero General Public License.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+    <program>  Copyright (C) <year>  <name of author>
+    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<https://www.gnu.org/licenses/>.
+
+  The GNU General Public License does not permit incorporating your program
+into proprietary programs.  If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.  But first, please read
+<https://www.gnu.org/licenses/why-not-lgpl.html>.
diff --git a/library/__init__.py b/library/__init__.py
new file mode 100644
index 0000000..e69de29
diff --git a/library/vyos_facts.py b/library/vyos_facts.py
new file mode 100644
index 0000000..69e684a
--- /dev/null
+++ b/library/vyos_facts.py
@@ -0,0 +1,82 @@
+#!/usr/bin/python
+# -*- coding: utf-8 -*-
+# Copyright 2019 Red Hat
+# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
+"""
+The module file for vyos_facts
+"""
+
+from __future__ import absolute_import, division, print_function
+from ansible.module_utils.basic import AnsibleModule
+from ansible.module_utils.connection import Connection
+from ansible.module_utils. \
+     vyos.facts.facts import Facts
+
+ANSIBLE_METADATA = {'metadata_version': '1.1',
+                    'status': [u'preview'],
+                    'supported_by': [u'Ansible Network']}
+
+
+DOCUMENTATION = """
+---
+module: vyos_facts
+version_added: 2.9
+short_description: Get facts about vyos devices.
+description:
+  - Collects facts from network devices running the vyos operating
+    system. This module places the facts gathered in the fact tree keyed by the
+    respective resource name.  The facts module will always collect a
+    base set of facts from the device and can enable or disable
+    collection of additional facts.
+author: [u'Nilashish Chakraborty (@nilashishc)']
+options:
+  gather_subset:
+    description:
+      - When supplied, this argument will restrict the facts collected
+        to a given subset.  Possible values for this argument include
+        all, and net_configuration_<resource_name>.  Can specify a
+        list of values to include a larger subset.  Values can also be used
+        with an initial C(M(!)) to specify that a specific subset should
+        not be collected.
+    required: false
+    default: 'all'
+    version_added: "2.2"
+"""
+
+EXAMPLES = """
+# Gather all facts
+- vyos_facts:
+    gather_subset: all
+
+# Collect only the interfaces and default facts
+- vyos_facts:
+    gather_subset:
+      - net_configuration_interfaces
+
+# Do not collect interfaces facts
+- vyos_facts:
+    gather_subset:
+      - "!net_configuration_interfaces"
+"""
+
+RETURN = """
+See the respective resource module parameters for the tree.
+"""
+
+def main():
+    """
+    Main entry point for module execution
+
+    :returns: ansible_facts
+    """
+    module = AnsibleModule(argument_spec=Facts.argument_spec,
+                           supports_check_mode=True)
+    warnings = list()
+
+    connection = Connection(module._socket_path) #pylint: disable=W0212
+    gather_subset = module.params['gather_subset']
+    ansible_facts = Facts().get_facts(module, connection, gather_subset)
+    module.exit_json(ansible_facts=ansible_facts, warnings=warnings)
+
+if __name__ == '__main__':
+    main()
diff --git a/library/vyos_interfaces.py b/library/vyos_interfaces.py
new file mode 100644
index 0000000..3926684
--- /dev/null
+++ b/library/vyos_interfaces.py
@@ -0,0 +1,366 @@
+#!/usr/bin/python
+# -*- coding: utf-8 -*-
+# Copyright 2019 Red Hat
+# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
+
+##############################################
+################# WARNING ####################
+##############################################
+###
+### This file is auto generated by the resource
+###   module builder playbook.
+###
+### Do not edit this file manually.
+###
+### Changes to this file will be over written
+###   by the resource module builder.
+###
+### Changes should be made in the model used to
+###   generate this file or in the resource module
+###   builder template.
+###
+##############################################
+##############################################
+##############################################
+
+"""
+The module file for vyos_interfaces
+"""
+
+from __future__ import absolute_import, division, print_function
+from ansible.module_utils.basic import AnsibleModule
+from ansible.module_utils. \
+     vyos.config.interfaces.interfaces import Interfaces
+
+ANSIBLE_METADATA = {'metadata_version': '1.1',
+                    'status': [u'preview'],
+                    'supported_by': [u'Ansible Network']}
+
+
+DOCUMENTATION = """
+---
+module: vyos_interfaces
+version_added: 2.9
+short_description: Manages Interfaces attributes of devices running VyOS.
+description: [u'Manages interfaces attributes of devices running VyOS.']
+author: [u'Nilashish Chakraborty (@nilashishc)']
+options:
+  config:
+    description: The provided configuration
+    suboptions:
+      description:
+        description:
+        - Description for the interface.
+        type: str
+      duplex:
+        choices:
+        - full
+        - half
+        - auto
+        description:
+        - Interface link duplex mode status.
+        type: str
+      enable:
+        default: true
+        description:
+        - Administrative state of the interface.
+        type: bool
+      mtu:
+        description:
+        - Maximum Transmission Unit size for the interface.
+        - The value should be between 68 to 9000
+        type: str
+      name:
+        description:
+        - Name of the interface, i.e., eth0, eth1.
+        type: str
+      speed:
+        choices:
+        - auto
+        - '10'
+        - '100'
+        - '1000'
+        - '2500'
+        - '10000'
+        description:
+        - Interface link speed.
+        type: str
+  state:
+    choices:
+    - merged
+    - replaced
+    - overridden
+    - deleted
+    default: merged
+    description:
+    - The state the configuration should be left in.
+    type: str
+
+"""
+
+EXAMPLES = """
+# Using merged
+#
+# Before state:
+# -------------
+#
+# vyos:~$ show configuration commands | grep -e eth[2,3]
+# set interfaces ethernet eth2 description 'Ethernet Interface #3'
+# set interfaces ethernet eth2 'disable'
+# set interfaces ethernet eth2 duplex 'full'
+# set interfaces ethernet eth2 hw-id '08:00:27:ab:4e:79'
+# set interfaces ethernet eth2 mtu '500'
+# set interfaces ethernet eth2 smp_affinity 'auto'
+# set interfaces ethernet eth2 speed '100'
+# set interfaces ethernet eth3 description 'Configured by Ansible'
+# set interfaces ethernet eth3 duplex 'full'
+# set interfaces ethernet eth3 hw-id '08:00:27:17:3c:85'
+# set interfaces ethernet eth3 mtu '1200'
+# set interfaces ethernet eth3 smp_affinity 'auto'
+# set interfaces ethernet eth3 speed '100'
+#
+
+- name: Merge provided configuration with device configuration
+  vyos_interfaces:
+    config:
+      - name: eth2
+        description: 'Configured by Ansible'
+        enable: True
+
+      - name: eth3
+        description: 'Configured by Ansible'
+        mtu: 1500
+    state: merged
+
+# After state:
+# -------------
+#
+# vyos:~$ show configuration commands | grep -e eth[2,3]
+# set interfaces ethernet eth2 description 'Configured by Ansible'
+# set interfaces ethernet eth2 duplex 'full'
+# set interfaces ethernet eth2 hw-id '08:00:27:ab:4e:79'
+# set interfaces ethernet eth2 mtu '500'
+# set interfaces ethernet eth2 smp_affinity 'auto'
+# set interfaces ethernet eth2 speed '100'
+# set interfaces ethernet eth3 description 'Configured by Ansible'
+# set interfaces ethernet eth3 duplex 'full'
+# set interfaces ethernet eth3 hw-id '08:00:27:17:3c:85'
+# set interfaces ethernet eth3 mtu '1500'
+# set interfaces ethernet eth3 smp_affinity 'auto'
+# set interfaces ethernet eth3 speed '100
+
+# Using replaced
+#
+# Before state:
+# -------------
+#
+# vyos:~$ show configuration commands | grep eth
+# set interfaces ethernet eth0 address 'dhcp'
+# set interfaces ethernet eth0 description 'Management Interface for the Appliance'
+# set interfaces ethernet eth0 duplex 'auto'
+# set interfaces ethernet eth0 hw-id '08:00:27:f3:6c:b5'
+# set interfaces ethernet eth0 smp_affinity 'auto'
+# set interfaces ethernet eth0 speed 'auto'
+# set interfaces ethernet eth1 description 'Configured by Ansible Eng Team'
+# set interfaces ethernet eth1 duplex 'full'
+# set interfaces ethernet eth1 hw-id '08:00:27:ad:ef:65'
+# set interfaces ethernet eth1 smp_affinity 'auto'
+# set interfaces ethernet eth1 speed '100'
+# set interfaces ethernet eth2 description 'Configured by Ansible'
+# set interfaces ethernet eth2 duplex 'full'
+# set interfaces ethernet eth2 hw-id '08:00:27:ab:4e:79'
+# set interfaces ethernet eth2 mtu '500'
+# set interfaces ethernet eth2 smp_affinity 'auto'
+# set interfaces ethernet eth2 speed '100'
+# set interfaces ethernet eth3 description 'Configured by Ansible'
+# set interfaces ethernet eth3 duplex 'full'
+# set interfaces ethernet eth3 hw-id '08:00:27:17:3c:85'
+# set interfaces ethernet eth3 mtu '1500'
+# set interfaces ethernet eth3 smp_affinity 'auto'
+# set interfaces ethernet eth3 speed '100'
+
+- name: Replace device configurations of listed interfaces with provided configurations
+  vyos_interfaces:
+    config:
+      - name: eth2
+        description: "Replaced by Ansible"
+
+      - name: eth3
+        description: "Replaced by Ansible"
+
+      - name: eth1
+        description: "Replaced by Ansible"
+    state: replaced
+
+# After state:
+# -------------
+#
+# vyos:~$ show configuration commands | grep eth
+# set interfaces ethernet eth0 address 'dhcp'
+# set interfaces ethernet eth0 description 'Management Interface for the Appliance'
+# set interfaces ethernet eth0 duplex 'auto'
+# set interfaces ethernet eth0 hw-id '08:00:27:f3:6c:b5'
+# set interfaces ethernet eth0 smp_affinity 'auto'
+# set interfaces ethernet eth0 speed 'auto'
+# set interfaces ethernet eth1 description 'Replaced by Ansible'
+# set interfaces ethernet eth1 hw-id '08:00:27:ad:ef:65'
+# set interfaces ethernet eth1 smp_affinity 'auto'
+# set interfaces ethernet eth2 description 'Replaced by Ansible'
+# set interfaces ethernet eth2 hw-id '08:00:27:ab:4e:79'
+# set interfaces ethernet eth2 smp_affinity 'auto'
+# set interfaces ethernet eth3 description 'Replaced by Ansible'
+# set interfaces ethernet eth3 hw-id '08:00:27:17:3c:85'
+# set interfaces ethernet eth3 smp_affinity 'auto'
+
+# Using overridden
+#
+# Before state
+# --------------
+#
+# vyos@vyos-appliance:~$ show configuration commands | grep eth
+# set interfaces ethernet eth0 address 'dhcp'
+# set interfaces ethernet eth0 description 'Ethernet Interface - 0'
+# set interfaces ethernet eth0 duplex 'auto'
+# set interfaces ethernet eth0 hw-id '08:00:27:f3:6c:b5'
+# set interfaces ethernet eth0 smp_affinity 'auto'
+# set interfaces ethernet eth0 speed 'auto'
+# set interfaces ethernet eth0 mtu '1200'
+# set interfaces ethernet eth1 address '192.168.1.120/24'
+# set interfaces ethernet eth1 description 'Configured by Ansible Eng Team'
+# set interfaces ethernet eth1 duplex 'full'
+# set interfaces ethernet eth1 hw-id '08:00:27:ad:ef:65'
+# set interfaces ethernet eth1 mtu '100'
+# set interfaces ethernet eth1 smp_affinity 'auto'
+# set interfaces ethernet eth1 speed '100'
+# set interfaces ethernet eth2 description 'Configured by Ansible Team (Admin Down)'
+# set interfaces ethernet eth2 duplex 'full'
+# set interfaces ethernet eth2 hw-id '08:00:27:ab:4e:79'
+# set interfaces ethernet eth2 mtu '600'
+# set interfaces ethernet eth2 smp_affinity 'auto'
+# set interfaces ethernet eth2 speed '100'
+# set interfaces ethernet eth3 description 'Configured by Ansible Network'
+# set interfaces ethernet eth3 duplex 'full'
+# set interfaces ethernet eth3 hw-id '08:00:27:17:3c:85'
+# set interfaces ethernet eth3 smp_affinity 'auto'
+# set interfaces ethernet eth3 speed '100'
+
+- name: Overrides all device configuration with provided configuration
+  vyos_interfaces:
+    config:
+      - name: eth1
+        description: Outbound Interface For The Appliance
+
+      - name: eth2
+        speed: auto
+        duplex: auto
+
+      - name: eth3
+        mtu: 1200
+    state: overridden
+
+# After state
+# ------------
+#
+# vyos@vyos-appliance:~$ show configuration commands | grep eth
+# set interfaces ethernet eth0 address 'dhcp'
+# set interfaces ethernet eth0 hw-id '08:00:27:f3:6c:b5'
+# set interfaces ethernet eth0 smp_affinity 'auto'
+# set interfaces ethernet eth1 address '192.168.1.120/24'
+# set interfaces ethernet eth1 description 'Outbound Interface For The Appliance'
+# set interfaces ethernet eth1 hw-id '08:00:27:ad:ef:65'
+# set interfaces ethernet eth1 smp_affinity 'auto'
+# set interfaces ethernet eth2 duplex 'auto'
+# set interfaces ethernet eth2 hw-id '08:00:27:ab:4e:79'
+# set interfaces ethernet eth2 smp_affinity 'auto'
+# set interfaces ethernet eth2 speed 'auto'
+# set interfaces ethernet eth3 hw-id '08:00:27:17:3c:85'
+# set interfaces ethernet eth3 mtu '1200'
+# set interfaces ethernet eth3 smp_affinity 'auto'
+
+# Using deleted
+#
+# Before state
+# -------------
+# vyos@vyos-appliance:~$ show configuration commands | grep eth
+# set interfaces ethernet eth0 address 'dhcp'
+# set interfaces ethernet eth0 description 'Outbound Interface for this appliance'
+# set interfaces ethernet eth0 duplex 'auto'
+# set interfaces ethernet eth0 hw-id '08:00:27:f3:6c:b5'
+# set interfaces ethernet eth0 smp_affinity 'auto'
+# set interfaces ethernet eth0 speed 'auto'
+# set interfaces ethernet eth1 description 'Configured by Ansible Network'
+# set interfaces ethernet eth1 duplex 'full'
+# set interfaces ethernet eth1 hw-id '08:00:27:ad:ef:65'
+# set interfaces ethernet eth1 smp_affinity 'auto'
+# set interfaces ethernet eth1 speed '100'
+# set interfaces ethernet eth2 description 'Configured by Ansible'
+# set interfaces ethernet eth2 duplex 'full'
+# set interfaces ethernet eth2 hw-id '08:00:27:ab:4e:79'
+# set interfaces ethernet eth2 mtu '600'
+# set interfaces ethernet eth2 smp_affinity 'auto'
+# set interfaces ethernet eth2 speed '100'
+# set interfaces ethernet eth3 description 'Configured by Ansible Network'
+# set interfaces ethernet eth3 duplex 'full'
+# set interfaces ethernet eth3 hw-id '08:00:27:17:3c:85'
+# set interfaces ethernet eth3 smp_affinity 'auto'
+# set interfaces ethernet eth3 speed '100'
+
+- name: Delete attributes of given interfaces (Note: This won't delete the interface itself)
+  vyos_interfaces:
+    config:
+      - name: "{{ item }}"
+    state: deleted
+    loop:
+      - eth1
+      - eth2
+      - eth3
+
+# After state
+# ------------
+# vyos@vyos-appliance:~$ show configuration commands | grep eth
+# set interfaces ethernet eth0 address 'dhcp'
+# set interfaces ethernet eth0 description 'Outbound Interface for this appliance'
+# set interfaces ethernet eth0 duplex 'auto'
+# set interfaces ethernet eth0 hw-id '08:00:27:f3:6c:b5'
+# set interfaces ethernet eth0 smp_affinity 'auto'
+# set interfaces ethernet eth0 speed 'auto'
+# set interfaces ethernet eth1 address '192.168.1.120/24'
+# set interfaces ethernet eth1 hw-id '08:00:27:ad:ef:65'
+# set interfaces ethernet eth1 smp_affinity 'auto'
+# set interfaces ethernet eth2 hw-id '08:00:27:ab:4e:79'
+# set interfaces ethernet eth2 smp_affinity 'auto'
+# set interfaces ethernet eth3 hw-id '08:00:27:17:3c:85'
+# set interfaces ethernet eth3 smp_affinity 'auto'
+"""
+
+RETURN = """
+before:
+  description: The configuration prior to the model invocation.
+  returned: always
+  sample: The configuration returned will always be in the same format of the parameters above.
+after:
+  description: The resulting configuration model invocation.
+  returned: when changed
+  sample: The configuration returned will always be in the same format of the parameters above.
+commands:
+  description: The set of commands pushed to the remote device.
+  returned: always
+  type: list
+  sample: [set interfaces ethernet eth0 mtu 1500', 'set interfaces ethernet eth1 description Configured by Ansible']
+"""
+
+
+def main():
+    """
+    Main entry point for module execution
+
+    :returns: the result form module invocation
+    """
+    module = AnsibleModule(argument_spec=Interfaces.argument_spec,
+                           supports_check_mode=True)
+
+    result = Interfaces(module).execute_module()
+    module.exit_json(**result)
+
+if __name__ == '__main__':
+    main()
diff --git a/module_utils/__init__.py b/module_utils/__init__.py
new file mode 100644
index 0000000..e69de29
diff --git a/module_utils/vyos/__init__.py b/module_utils/vyos/__init__.py
new file mode 100644
index 0000000..e69de29
diff --git a/module_utils/vyos/argspec/__init__.py b/module_utils/vyos/argspec/__init__.py
new file mode 100644
index 0000000..e69de29
diff --git a/module_utils/vyos/argspec/facts/__init__.py b/module_utils/vyos/argspec/facts/__init__.py
new file mode 100644
index 0000000..e69de29
diff --git a/module_utils/vyos/argspec/facts/facts.py b/module_utils/vyos/argspec/facts/facts.py
new file mode 100644
index 0000000..78f2653
--- /dev/null
+++ b/module_utils/vyos/argspec/facts/facts.py
@@ -0,0 +1,23 @@
+#!/usr/bin/python
+# -*- coding: utf-8 -*-
+# Copyright 2019 Red Hat
+# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
+"""
+The arg spec for the vyos facts module.
+"""
+
+class FactsArgs(object): #pylint: disable=R0903
+    """ The arg spec for the vyos facts module
+    """
+
+    def __init__(self, **kwargs):
+        pass
+
+    choices = [
+        'all',
+        'net_configuration_interfaces',
+    ]
+
+    argument_spec = {
+        'gather_subset': dict(default=['all'], choices=choices, type='list')
+    }
diff --git a/module_utils/vyos/argspec/interfaces/__init__.py b/module_utils/vyos/argspec/interfaces/__init__.py
new file mode 100644
index 0000000..e69de29
diff --git a/module_utils/vyos/argspec/interfaces/interfaces.py b/module_utils/vyos/argspec/interfaces/interfaces.py
new file mode 100644
index 0000000..318f5e4
--- /dev/null
+++ b/module_utils/vyos/argspec/interfaces/interfaces.py
@@ -0,0 +1,36 @@
+#!/usr/bin/python
+# -*- coding: utf-8 -*-
+# Copyright 2019 Red Hat
+# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
+
+#############################################
+################# WARNING ####################
+##############################################
+###
+### This file is auto generated by the resource
+###   module builder playbook.
+###
+### Do not edit this file manually.
+###
+### Changes to this file will be over written
+###   by the resource module builder.
+###
+### Changes should be made in the model used to
+###   generate this file or in the resource module
+###   builder template.
+###
+##############################################
+##############################################
+##############################################
+"""
+The arg spec for the vyos_interfaces module
+"""
+
+class InterfacesArgs(object): #pylint: disable=R0903
+    """The arg spec for the vyos_interfaces module
+    """
+
+    def __init__(self, **kwargs):
+        pass
+
+    argument_spec = {u'state': {'default': u'merged', 'required': False, 'type': u'str', 'choices': [u'merged', u'replaced', u'overridden', u'deleted']}, u'config': {'elements': u'dict', 'type': 'list', 'options': {u'enable': {'default': True, 'required': False, 'type': u'bool'}, u'description': {'required': False, 'type': u'str'}, u'duplex': {'required': False, 'type': u'str', 'choices': [u'full', u'half', u'auto']}, u'mtu': {'required': False, 'type': u'str'}, u'speed': {'required': False, 'type': u'str', 'choices': [u'auto', u'10', u'100', u'1000', u'2500', u'10000']}, u'name': {'required': False, 'type': u'str'}}}} #pylint: disable=C0301
diff --git a/module_utils/vyos/config/__init__.py b/module_utils/vyos/config/__init__.py
new file mode 100644
index 0000000..e69de29
diff --git a/module_utils/vyos/config/base.py b/module_utils/vyos/config/base.py
new file mode 100644
index 0000000..39da136
--- /dev/null
+++ b/module_utils/vyos/config/base.py
@@ -0,0 +1,24 @@
+#!/usr/bin/python
+# -*- coding: utf-8 -*-
+# Copyright 2019 Red Hat
+# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
+"""
+The base class for all vyos resource modules
+"""
+
+from ansible.module_utils.connection import Connection
+
+class ConfigBase(object): #pylint: disable=R0205,R0903
+    """ The base class for all vyos resource modules
+    """
+    _connection = None
+
+    def __init__(self, module):
+        self._module = module
+        self._connection = self._get_connection()
+
+    def _get_connection(self):
+        if self._connection:
+            return self._connection
+        self._connection = Connection(self._module._socket_path) #pylint: disable=W0212
+        return self._connection
diff --git a/module_utils/vyos/config/interfaces/__init__.py b/module_utils/vyos/config/interfaces/__init__.py
new file mode 100644
index 0000000..e69de29
diff --git a/module_utils/vyos/config/interfaces/interfaces.py b/module_utils/vyos/config/interfaces/interfaces.py
new file mode 100644
index 0000000..67ef16a
--- /dev/null
+++ b/module_utils/vyos/config/interfaces/interfaces.py
@@ -0,0 +1,248 @@
+#!/usr/bin/python
+# -*- coding: utf-8 -*-
+# Copyright 2019 Red Hat
+# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
+"""
+The vyos_interfaces class
+It is in this file where the current configuration (as dict)
+is compared to the provided configuration (as dict) and the command set
+necessary to bring the current configuration to it's desired end-state is
+created
+"""
+from ansible.module_utils.network.common.utils import to_list
+from ansible.module_utils. \
+     vyos.argspec.interfaces.interfaces import InterfacesArgs
+from ansible.module_utils. \
+     vyos. \
+     config.base import ConfigBase
+from ansible.module_utils. \
+     vyos.facts.facts import Facts
+from ansible.module_utils. \
+    vyos.utils.utils import search_obj_in_list, get_interface_type
+
+
+class Interfaces(ConfigBase, InterfacesArgs):
+    """
+    The vyos_interfaces class
+    """
+
+    gather_subset = [
+        'net_configuration_interfaces',
+    ]
+
+    params = ('speed', 'description', 'duplex', 'mtu')
+
+    def get_interfaces_facts(self):
+        """ Get the 'facts' (the current configuration)
+
+        :rtype: A dictionary
+        :returns: The current configuration as a dictionary
+        """
+        facts = Facts().get_facts(self._module, self._connection, self.gather_subset)
+        interfaces_facts = facts['net_configuration'].get('interfaces')
+        if not interfaces_facts:
+            return []
+        return interfaces_facts
+
+    def execute_module(self):
+        """ Execute the module
+
+        :rtype: A dictionary
+        :returns: The result from module execution
+        """
+        result = {'changed': False}
+        commands = list()
+        warnings = list()
+
+        existing_interface_facts = self.get_interfaces_facts()
+        commands.extend(self.set_config())
+        if commands:
+            if self._module.check_mode:
+                resp = self._connection.edit_config(commands, commit=False)
+            else:
+                resp = self._connection.edit_config(commands)
+            result['changed'] = True
+
+        result['commands'] = commands
+
+        if self._module._diff:
+            result['diff'] = resp['diff'] if result['changed'] else None
+
+        changed_interfaces_facts = self.get_interfaces_facts()
+
+        result['before'] = existing_interface_facts
+        if result['changed']:
+            result['after'] = changed_interfaces_facts
+
+        result['warnings'] = warnings
+        return result
+
+    def set_config(self):
+        """ Collect the configuration from the args passed to the module,
+            collect the current configuration (as a dict from facts)
+
+        :rtype: A list
+        :returns: the commands necessary to migrate the current configuration
+                  to the desired configuration
+        """
+        want = self._module.params['config']
+        for w in want:
+            if 'name' in w:
+                w.update({'name': w['name']})
+        have = self.get_interfaces_facts()
+        resp = self.set_state(want, have)
+        return to_list(resp)
+
+    def set_state(self, want, have):
+        """ Select the appropriate function based on the state provided
+
+        :param want: the desired configuration as a dictionary
+        :param have: the current configuration as a dictionary
+        :rtype: A list
+        :returns: the commands necessary to migrate the current configuration
+                  to the desired configuration
+        """
+        commands = []
+
+        state = self._module.params['state']
+        if state == 'overridden':
+            commands.extend(Interfaces._state_overridden(want=want, have=have))
+        else:
+            for w in want:
+                name = w['name']
+                obj_in_have = search_obj_in_list(name, have)
+                if state == 'deleted':
+                    commands.extend(Interfaces._state_deleted(want_intf=w, have_intf=obj_in_have))
+
+                elif state == 'merged':
+                    commands.extend(Interfaces._state_merged(want_intf=w, have_intf=obj_in_have))
+
+                elif state == 'replaced':
+                    commands.extend(Interfaces._state_replaced(want_intf=w, have_intf=obj_in_have))
+
+        return commands
+
+    @staticmethod
+    def _state_replaced(**kwargs):
+        """ The command generator when state is replaced
+
+        :rtype: A list
+        :returns: the commands necessary to migrate the current configuration
+                  to the desired configuration
+        """
+        commands = []
+
+        w = kwargs['want_intf']
+        obj_in_have = kwargs['have_intf']
+
+        name = w['name']
+        delete_interface = 'delete interfaces ethernet ' + name
+
+        if obj_in_have:
+            for item in Interfaces.params:
+                value = obj_in_have.get(item)
+                if value and not w[item]:
+                    commands.append(delete_interface + ' ' + item)
+            if obj_in_have['enable'] != w['enable']:
+                commands.append(delete_interface + ' disable')
+
+        commands.extend(Interfaces._state_merged(want_intf=w, have_intf=obj_in_have))
+
+        return commands
+
+    @staticmethod
+    def _state_overridden(**kwargs):
+        """ The command generator when state is overridden
+
+        :rtype: A list
+        :returns: the commands necessary to migrate the current configuration
+                  to the desired configuration
+        """
+        commands = []
+
+        want = kwargs['want']
+        have = kwargs['have']
+
+        for h in have:
+            name = h['name']
+            obj_in_want = search_obj_in_list(name, want)
+
+            delete_interface = 'delete interfaces ethernet ' + name
+
+            if not obj_in_want:
+                for item in Interfaces.params:
+                    if h.get(item):
+                        commands.append(delete_interface + ' ' + item)
+
+        for w in want:
+            name = w['name']
+            obj_in_have = search_obj_in_list(name, have)
+            commands.extend(Interfaces._state_replaced(want_intf=w, have_intf=obj_in_have))
+
+        return commands
+
+    @staticmethod
+    def _state_merged(**kwargs):
+        """ The command generator when state is merged
+
+        :rtype: A list
+        :returns: the commands necessary to merge the provided into
+                  the current configuration
+        """
+        commands = []
+
+        w = kwargs['want_intf']
+        obj_in_have = kwargs['have_intf']
+
+        name = w['name']
+        set_interface = 'set interfaces ethernet ' + name
+        delete_interface = 'delete interfaces ethernet ' + name
+
+        if obj_in_have:
+            for item in Interfaces.params:
+                value = w[item]
+                if value and str(value) != obj_in_have.get(item):
+                    commands.append(set_interface + ' ' + item + " '" + value + "'")
+
+            if w['enable'] and not obj_in_have['enable']:
+                commands.append(delete_interface + ' disable')
+
+            elif not w['enable'] and obj_in_have['enable']:
+                commands.append(set_interface + ' disable')
+
+        else:
+            commands.append(set_interface)
+            for item in Interfaces.params:
+                value = w[item]
+                if value:
+                    commands.append(set_interface + ' ' + item + " '" + value + "'")
+
+            if not w['enable']:
+                commands.append(set_interface + ' disable')
+
+        return commands
+
+    @staticmethod
+    def _state_deleted(**kwargs):
+        """ The command generator when state is deleted
+
+        :rtype: A list
+        :returns: the commands necessary to remove the current configuration
+                  of the provided objects
+        """
+        commands = []
+
+        w = kwargs['want_intf']
+        obj_in_have = kwargs['have_intf']
+
+        name = w['name']
+        delete_interface = 'delete interfaces ethernet ' + name
+
+        if obj_in_have:
+            for item in Interfaces.params:
+                if obj_in_have.get(item):
+                    commands.append(delete_interface + ' ' + item)
+            if not obj_in_have.get('enable'):
+                commands.append(delete_interface + ' disable')
+
+        return commands
diff --git a/module_utils/vyos/facts/__init__.py b/module_utils/vyos/facts/__init__.py
new file mode 100644
index 0000000..e69de29
diff --git a/module_utils/vyos/facts/base.py b/module_utils/vyos/facts/base.py
new file mode 100644
index 0000000..839a49f
--- /dev/null
+++ b/module_utils/vyos/facts/base.py
@@ -0,0 +1,109 @@
+#!/usr/bin/python
+# -*- coding: utf-8 -*-
+# Copyright 2019 Red Hat
+# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
+"""
+The vyos facts base class
+this contains methods common to all facts subsets
+"""
+
+import re
+from copy import deepcopy
+from ansible.module_utils.six import iteritems
+
+
+class FactsBase(object): #pylint: disable=R0205
+    """
+    The vyos facts base class
+    """
+    generated_spec = {}
+    ansible_facts = {'net_configuration': {}}
+
+    def __init__(self, argspec, subspec=None, options=None):
+        spec = deepcopy(argspec)
+        if subspec:
+            if options:
+                facts_argument_spec = spec[subspec][options]
+            else:
+                facts_argument_spec = spec[subspec]
+        else:
+            facts_argument_spec = spec
+
+        self.generated_spec = self.generate_dict(facts_argument_spec)
+
+    @staticmethod
+    def generate_dict(spec):
+        """
+        Generate dictionary which is in sync with argspec
+
+        :param spec: A dictionary which the argspec of module
+        :rtype: A dictionary
+        :returns: A dictionary in sync with argspec with default value
+        """
+        obj = {}
+        if not spec:
+            return obj
+
+        for key, val in iteritems(spec):
+            if 'default' in val:
+                dct = {key: val['default']}
+            else:
+                dct = {key: None}
+            obj.update(dct)
+
+        return obj
+
+    @staticmethod
+    def parse_conf_arg(cfg, arg):
+        """
+        Parse config based on argument
+
+        :param cfg: A text string which is a line of configuration.
+        :param arg: A text string which is to be matched.
+        :rtype: A text string
+        :returns: A text string if match is found
+        """
+        result = None
+        match = re.search(r'%s (.+)(\n|$)' % arg, cfg, re.M)
+        if match:
+            result = match.group(1).strip("'")
+        return result
+
+    @staticmethod
+    def parse_conf_cmd_arg(cfg, cmd, res1, res2=None):
+        """
+        Parse config based on command
+
+        :param cfg: A text string which is a line of configuration.
+        :param cmd: A text string which is the command to be matched
+        :param res1: A text string to be returned if the command is present
+        :param res2: A text string to be returned if the negate command is present
+        :rtype: A text string
+        :returns: A text string if match is found
+        """
+        match = re.search(r'\n\s+%s(\n|$)' % cmd, cfg)
+        if match:
+            return res1
+        if res2 is not None:
+            match = re.search(r'\n\s+no %s(\n|$)' % cmd, cfg)
+            if match:
+                return res2
+        return None
+
+    @staticmethod
+    def generate_final_config(cfg_dict):
+        """
+        Generate final config dictionary
+
+        :param cfg_dict: A dictionary parsed in the facts system
+        :rtype: A dictionary
+        :returns: A dictionary by eliminating keys that have null values
+        """
+        final_cfg = {}
+        if not cfg_dict:
+            return final_cfg
+
+        for key, val in iteritems(cfg_dict):
+            if val is not None:
+                final_cfg.update({key:val})
+        return final_cfg
diff --git a/module_utils/vyos/facts/facts.py b/module_utils/vyos/facts/facts.py
new file mode 100644
index 0000000..79335db
--- /dev/null
+++ b/module_utils/vyos/facts/facts.py
@@ -0,0 +1,77 @@
+#!/usr/bin/python
+# -*- coding: utf-8 -*-
+# Copyright 2019 Red Hat
+# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
+"""
+The facts class for vyos
+this file validates each subset of facts and selectively
+calls the appropriate facts gathering function
+"""
+
+from ansible.module_utils. \
+     vyos.argspec.facts.facts import FactsArgs
+from ansible.module_utils. \
+     vyos.argspec.interfaces.interfaces import InterfacesArgs
+from ansible.module_utils. \
+     vyos.facts.base import FactsBase
+from ansible.module_utils. \
+     vyos.facts.interfaces.interfaces import InterfacesFacts
+
+class Facts(FactsArgs, FactsBase): #pylint: disable=R0903
+    """ The fact class for vyos
+    """
+
+    def get_facts(self, module, connection, gather_subset=['all']):
+        """ Collect the facts for vyos
+
+        :param module: The module instance
+        :param connection: The device connection
+        :param gather_subset: The facts subset to collect
+        :rtype: dict
+        :returns: the facts gathered
+        """
+        valid_subsets = self.argument_spec['gather_subset'].get('choices', [])
+        if valid_subsets and 'all' in valid_subsets:
+            valid_subsets.remove('all')
+
+        runable_subsets = set()
+        exclude_subsets = set()
+        if not gather_subset:
+            gather_subset = ['all']
+
+        for subset in gather_subset:
+            if subset == 'all':
+                runable_subsets.update(valid_subsets)
+                continue
+            if subset.startswith('!'):
+                subset = subset[1:]
+                if subset == 'all':
+                    exclude_subsets.update(valid_subsets)
+                    continue
+                exclude = True
+            else:
+                exclude = False
+
+            if subset not in valid_subsets:
+                module.fail_json(msg='Bad subset')
+
+            if exclude:
+                exclude_subsets.add(subset)
+            else:
+                runable_subsets.add(subset)
+
+        if not runable_subsets:
+            runable_subsets.update(valid_subsets)
+
+        runable_subsets.difference_update(exclude_subsets)
+        self.ansible_facts['gather_subset'] = list(runable_subsets)
+
+        for attr in runable_subsets:
+            getattr(self, '_get_%s' % attr, {})(module, connection)
+
+        return self.ansible_facts
+
+    @staticmethod
+    def _get_net_configuration_interfaces(module, connection):
+        return InterfacesFacts(InterfacesArgs. \
+               argument_spec, 'config', 'options').populate_facts(module, connection)
diff --git a/module_utils/vyos/facts/interfaces/__init__.py b/module_utils/vyos/facts/interfaces/__init__.py
new file mode 100644
index 0000000..e69de29
diff --git a/module_utils/vyos/facts/interfaces/interfaces.py b/module_utils/vyos/facts/interfaces/interfaces.py
new file mode 100644
index 0000000..060a19f
--- /dev/null
+++ b/module_utils/vyos/facts/interfaces/interfaces.py
@@ -0,0 +1,80 @@
+#!/usr/bin/python
+# -*- coding: utf-8 -*-
+# Copyright 2019 Red Hat
+# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
+"""
+The vyos interfaces fact class
+It is in this file the configuration is collected from the device
+for a given resource, parsed, and the facts tree is populated
+based on the configuration.
+"""
+from copy import deepcopy
+from ansible.module_utils. \
+     vyos.facts.base import FactsBase
+from re import findall, M
+
+
+class InterfacesFacts(FactsBase):
+    """ The vyos interfaces fact class
+    """
+
+    def populate_facts(self, module, connection, data=None):
+        """ Populate the facts for interfaces
+
+        :param module: the module instance
+        :param connection: the device connection
+        :param data: previously collected conf
+        :rtype: dictionary
+        :returns: facts
+        """
+        if module: #just for linting purposes
+            pass
+        if connection:  #just for linting purposes
+            pass
+
+        if not data:
+            data = connection.get_config()
+
+        objs = []
+
+        interface_names = findall(r'^set interfaces ethernet (\S+)', data, M)
+        if interface_names:
+            for interface in set(interface_names):
+                intf_regex = r' %s .+$' % interface
+                cfg = findall(intf_regex, data, M)
+                cfg = '\n'.join(cfg)
+                obj = self.render_config(self.generated_spec, cfg)
+                obj['name'] = interface
+                if obj:
+                    objs.append(obj)
+        facts = {}
+        if objs:
+            facts['interfaces'] = objs
+        self.ansible_facts['net_configuration'].update(facts)
+        return self.ansible_facts
+
+    def render_config(self, spec, conf):
+        """
+        Render config as dictionary structure and delete keys from spec for null values
+
+        :param spec: The facts tree, generated from the argspec
+        :param conf: The configuration
+        :rtype: dictionary
+        :returns: The generated config
+        """
+        if conf:
+            pass
+
+        config = deepcopy(spec)
+
+        # populate the facts from the configuration
+        attribs = ['description','speed', 'mtu', 'duplex']
+
+        for x in attribs:
+            config[x] = self.parse_conf_arg(conf, x)
+        if '\'disable\'' in conf:
+            config['enable'] = False
+        else:
+            config['enable'] = True
+
+        return self.generate_final_config(config)
diff --git a/module_utils/vyos/utils/__init__.py b/module_utils/vyos/utils/__init__.py
new file mode 100644
index 0000000..e69de29
diff --git a/module_utils/vyos/utils/utils.py b/module_utils/vyos/utils/utils.py
new file mode 100644
index 0000000..7689494
--- /dev/null
+++ b/module_utils/vyos/utils/utils.py
@@ -0,0 +1,20 @@
+#!/usr/bin/python
+# -*- coding: utf-8 -*-
+# Copyright 2019 Red Hat
+# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
+
+# utils
+
+def search_obj_in_list(name, lst):
+    for o in lst:
+        if o['name'] == name:
+            return o
+    return None
+
+def get_interface_type(interface):
+    """Gets the type of interface
+    """
+    if interface.upper().startswith('ET'):
+        return 'ethernet'
+    else:
+        return 'unknown'
diff --git a/requirements.txt b/requirements.txt
new file mode 100644
index 0000000..f3a3f52
--- /dev/null
+++ b/requirements.txt
@@ -0,0 +1 @@
+ansible>=2.4.0
diff --git a/setup.cfg b/setup.cfg
new file mode 100644
index 0000000..d7fd16f
--- /dev/null
+++ b/setup.cfg
@@ -0,0 +1,2 @@
+[metadata]
+name = ansible-zuul-jobs
diff --git a/test-requirements.txt b/test-requirements.txt
index 049cd01..611bc25 100644
--- a/test-requirements.txt
+++ b/test-requirements.txt
@@ -1,2 +1,3 @@
+ara
 flake8
 yamllint
diff --git a/tests/ansible.cfg b/tests/ansible.cfg
new file mode 100644
index 0000000..37cf663
--- /dev/null
+++ b/tests/ansible.cfg
@@ -0,0 +1,8 @@
+[defaults]
+callback_whitelist = profile_tasks, timer
+retry_files_enabled = false
+roles_path = ../..
+stdout_callback = yaml
+
+[ssh_connection]
+pipelining = true
diff --git a/tests/foo.yaml b/tests/foo.yaml
new file mode 100644
index 0000000..4880101
--- /dev/null
+++ b/tests/foo.yaml
@@ -0,0 +1,7 @@
+- hosts: controller
+  tasks:
+    - name: Setup tox role
+      include_role:
+        name: tox
+      vars:
+        tox_extra_args: -- ansible-playbook -v -c network_cli tests/vyos/modules/interfaces/main.yaml
diff --git a/tests/vyos/modules/interfaces/deleted.yaml b/tests/vyos/modules/interfaces/deleted.yaml
new file mode 100644
index 0000000..a6e34ef
--- /dev/null
+++ b/tests/vyos/modules/interfaces/deleted.yaml
@@ -0,0 +1,36 @@
+---
+- debug:
+    msg: "Start vyos_interfaces deleted integration tests ansible_connection={{ ansible_connection }}"
+
+- include_tasks: populate.yaml
+
+- name: Delete attributes of given interfaces
+  vyos_interfaces: &deleted
+    config:
+      - name: eth1
+
+      - name: eth2
+    state: deleted
+  register: result
+
+- assert:
+    that:
+      - "'delete interfaces ethernet {{ intf }} description' in result.commands"
+      - "'delete interfaces ethernet {{ intf }} speed' in result.commands"
+      - "'delete interfaces ethernet {{ intf }} duplex' in result.commands"
+      - "'delete interfaces ethernet {{ intf }} mtu' in result.commands"
+  loop:
+    - eth1
+    - eth2
+  loop_control:
+    loop_var: intf
+
+- name: Delete attributes of given interfaces (IDEMPOTENT)
+  vyos_interfaces: *deleted
+  register: result
+
+- assert:
+    that:
+      - "result.changed == false"
+
+- include_tasks: remove_config.yaml
diff --git a/tests/vyos/modules/interfaces/main.yaml b/tests/vyos/modules/interfaces/main.yaml
new file mode 100644
index 0000000..0601c7b
--- /dev/null
+++ b/tests/vyos/modules/interfaces/main.yaml
@@ -0,0 +1,13 @@
+---
+- hosts: appliance
+  gather_facts: true
+  tasks:
+    - import_role:
+        name: network
+
+    - include_tasks: "{{ item }}.yaml"
+      loop:
+        - merged
+        - replaced
+        - overridden
+        - deleted
diff --git a/tests/vyos/modules/interfaces/merged.yaml b/tests/vyos/modules/interfaces/merged.yaml
new file mode 100644
index 0000000..db4ffd1
--- /dev/null
+++ b/tests/vyos/modules/interfaces/merged.yaml
@@ -0,0 +1,44 @@
+---
+- debug:
+    msg: "START vyos_interfaces merged integration tests on connection={{ ansible_connection }}"
+
+- include_tasks: remove_config.yaml
+
+- name: Merge the provided configuration with the exisiting running configuration
+  vyos_interfaces: &merged
+    config:
+      - name: eth1
+        description: "Configured by Ansible - Interface 1"
+        mtu: 1200
+        speed: auto
+        duplex: auto
+
+      - name: eth2
+        description: "Configured by Ansible - Interface 2 (ADMIN DOWN)"
+        mtu: 600
+        enable: false
+    state: merged
+  register: result
+
+- debug:
+    var: result
+
+- assert:
+    that:
+      - "'set interfaces ethernet eth1 description \\'Configured by Ansible - Interface 1\\'' in result.commands"
+      - "'set interfaces ethernet eth1 mtu \\'1200\\'' in result.commands"
+      - "'set interfaces ethernet eth1 duplex \\'auto\\'' in result.commands"
+      - "'set interfaces ethernet eth1 speed \\'auto\\'' in result.commands"
+      - "'set interfaces ethernet eth2 description \\'Configured by Ansible - Interface 2 (ADMIN DOWN)\\'' in result.commands"
+      - "'set interfaces ethernet eth2 mtu \\'600\\'' in result.commands"
+      - "'set interfaces ethernet eth2 disable' in result.commands"
+
+- name: Merge the provided configuration with the existing running configuration (IDEMPOTENT)
+  vyos_interfaces: *merged
+  register: result
+
+- assert:
+    that:
+      - 'result.changed == false'
+
+- include_tasks: remove_config.yaml
diff --git a/tests/vyos/modules/interfaces/overridden.yaml b/tests/vyos/modules/interfaces/overridden.yaml
new file mode 100644
index 0000000..943fecd
--- /dev/null
+++ b/tests/vyos/modules/interfaces/overridden.yaml
@@ -0,0 +1,35 @@
+---
+- debug:
+    msg: "START vyos_interfaces merged integration tests on connection={{ ansible_connection }}"
+
+- include_tasks: populate.yaml
+
+- name: Overrides all device configuration with provided configuration
+  vyos_interfaces: &overridden
+    config:
+      - name: eth2
+        description: "Overridden by Ansible"
+        mtu: 1500
+    state: overridden
+  register: result
+
+- assert:
+    that:
+      - "'delete interfaces ethernet {{ item }} description' in result.commands"
+      - "'delete interfaces ethernet {{ item }} speed' in result.commands"
+      - "'delete interfaces ethernet {{ item }} duplex' in result.commands"
+      - "'delete interfaces ethernet {{ item }} mtu' in result.commands"
+      - "'set interfaces ethernet eth2 description \\'Overridden by Ansible\\'' in result.commands"
+      - "'set interfaces ethernet eth2 mtu \\'1500\\'' in result.commands"
+  loop:
+    - eth1
+
+- name: Overrides all device configuration with provided configurations (IDEMPOTENT)
+  vyos_interfaces: *overridden
+  register: result
+
+- assert:
+    that:
+      - "result.changed == false"
+
+- include_tasks: remove_config.yaml
diff --git a/tests/vyos/modules/interfaces/populate.yaml b/tests/vyos/modules/interfaces/populate.yaml
new file mode 100644
index 0000000..b2185da
--- /dev/null
+++ b/tests/vyos/modules/interfaces/populate.yaml
@@ -0,0 +1,15 @@
+---
+- name: Setup
+  cli_config:
+    config: "{{ lines }}"
+  vars:
+    lines: |
+      set interfaces ethernet "{{ intf }}" description 'Configured by Ansible'
+      set interfaces ethernet "{{ intf }}" speed 'auto'
+      set interfaces ethernet "{{ intf }}" duplex 'auto'
+      set interfaces ethernet "{{ intf }}" mtu '1200'
+  loop:
+    - eth1
+    - eth2
+  loop_control:
+    loop_var: intf
diff --git a/tests/vyos/modules/interfaces/remove_config.yaml b/tests/vyos/modules/interfaces/remove_config.yaml
new file mode 100644
index 0000000..a20919a
--- /dev/null
+++ b/tests/vyos/modules/interfaces/remove_config.yaml
@@ -0,0 +1,16 @@
+---
+- name: Remove Config
+  cli_config:
+    config: "{{ lines }}"
+  vars:
+    lines: |
+      delete interfaces ethernet "{{ intf }}" description
+      delete interfaces ethernet "{{ intf }}" speed
+      delete interfaces ethernet "{{ intf }}" duplex
+      delete interfaces ethernet "{{ intf }}" mtu
+      delete interfaces ethernet "{{ intf }}" disable
+  loop:
+    - eth1
+    - eth2
+  loop_control:
+    loop_var: intf
diff --git a/tests/vyos/modules/interfaces/replaced.yaml b/tests/vyos/modules/interfaces/replaced.yaml
new file mode 100644
index 0000000..0725a06
--- /dev/null
+++ b/tests/vyos/modules/interfaces/replaced.yaml
@@ -0,0 +1,38 @@
+---
+- debug:
+    msg: START vyos_interfaces replaced integration tests on connection={{ ansible_connection }}
+
+- include_tasks: populate.yaml
+
+- name: Replace device configurations of listed interfaces with provided configurations
+  vyos_interfaces: &replaced
+    config:
+      - name: eth1
+        description: "Replaced by Ansible"
+
+      - name: eth2
+        mtu: 1500
+        description: "Replaced by Ansible"
+    state: replaced
+  register: result
+
+- assert:
+    that:
+      - "'delete interfaces ethernet eth1 mtu' in result.commands"
+      - "'delete interfaces ethernet eth1 speed' in result.commands"
+      - "'delete interfaces ethernet eth1 duplex' in result.commands"
+      - "'set interfaces ethernet eth1 description \\'Replaced by Ansible\\'' in result.commands"
+      - "'set interfaces ethernet eth2 mtu \\'1500\\'' in result.commands"
+      - "'delete interfaces ethernet eth2 speed' in result.commands"
+      - "'delete interfaces ethernet eth2 duplex' in result.commands"
+      - "'set interfaces ethernet eth2 description \\'Replaced by Ansible\\'' in result.commands"
+
+- name: Replace device configurations of listed interfaces with provided configurarions
+  vyos_interfaces: *replaced
+  register: result
+
+- assert:
+    that:
+      - "result.changed == false"
+
+- include_tasks: remove_config.yaml
diff --git a/tox.ini b/tox.ini
index 86beb92..190fa88 100644
--- a/tox.ini
+++ b/tox.ini
@@ -6,7 +6,8 @@ envlist = linters
 [testenv]
 basepython = python3
 install_command = pip install {opts} {packages}
-deps = -r{toxinidir}/test-requirements.txt
+deps = -r{toxinidir}/requirements.txt
+       -r{toxinidir}/test-requirements.txt
 
 [testenv:linters]
 basepython = python3
@@ -15,6 +16,9 @@ commands =
   flake8 {posargs}
 
 [testenv:venv]
+setenv =
+  ANSIBLE_CONFIG = {toxinidir}/tests/ansible.cfg
+  ANSIBLE_CALLBACK_PLUGINS = {envsitepackagesdir}/ara/plugins/callbacks
 basepython = python3
 commands = {posargs}