My home stopping Update

[manueltn78]

Hi, I have Ha that stop updating My home components.
I see powered off lights that are On, anfd if I try to toggle, the button return to off even with the light on....
The only thingI can do to solve is to reload the gateway (In my case a MH201).
Anyone have a solution?
thank you.

[manueltn78]

I have an update:
In network switch i noti c'è that every 6-8 minutes the link go off and on.
After this the integration stop working an I have to reload it!

[zltigo]

Ha that stop updating My home components.

Updating also disappears after a few minutes of work.
Rebooting gateway MH200N has no effect. Reloading MyHome integration restores functionality for a short time.
short.log

Anyone have a solution?

Тhe same question :(

[riccardilorenzo]

Same issue here.
I have to reload the integration (at the moment I have an automation that does this every 10 minutes, but it is both dangerous (for automations that may not complete) and annoying).

[zltigo]

So far the way out of this state is as follows:

1. shutdown HA
2. reset HM200N
3. wait start HM200N
4. up HA
   After this it works for several weeks.
   I have an idea for a more convenient automatic option. I'm waiting for a failure to check it.

[barto28]

Exact same issue. Plugin is working properly until it doesn't (very short amount of time maybe 10min max).
Clicking on light may turn off/on (depending on current state) successfully for one attempt only. After that only a relaod of the integration make it work again for 10 minutes.

Gateway is Legrand F454

@riccardilorenzo can you share your automation for restarting the integration please ?

[riccardilorenzo]

@barto28 here you are.
This fires every 10 minutes in the 15th second (to not interfere with other automations that may launch at X o'clock).
It simply reloads a HA entity of MyHome using the option available also from the GUI. Of course, this makes every HA entity connected to MyHome integration unavailable for a few seconds.

- id: '1724433704712'
  alias: Autofix MyHome
  description: 'Reloads config entry for a single HA entity belonging to MyHome.'
  trigger:
  - platform: time_pattern
    seconds: '15'
    minutes: /10
  condition: []
  action:
  - action: homeassistant.reload_config_entry
    data: {}
    target:
      entity_id: light.presa_comodino_lorenzo
  mode: single

[barto28]

@barto28 here you are. This fires every 10 minutes in the 15th second (to not interfere with other automations that may launch at X o'clock). It simply reloads a HA entity of MyHome using the option available also from the GUI. Of course, this makes every HA entity connected to MyHome integration unavailable for a few seconds.

- id: '1724433704712'
  alias: Autofix MyHome
  description: 'Reloads config entry for a single HA entity belonging to MyHome.'
  trigger:
  - platform: time_pattern
    seconds: '15'
    minutes: /10
  condition: []
  action:
  - action: homeassistant.reload_config_entry
    data: {}
    target:
      entity_id: light.presa_comodino_lorenzo
  mode: single

Thanks a lot !

[imfreddie]

i dont manage to paste that into an automation, do i have to put it in the config file for HA or can i create an automation in the GUI HA YAML editor? tells me the data {} is not allowed, sorry im quite new to this.

[riccardilorenzo]

@zltigo do you have any update?

i dont manage to paste that into an automation, do i have to put it in the config file for HA or can i create an automation in the GUI HA YAML editor? tells me the data {} is not allowed, sorry im quite new to this.

Use only the GUI without copying the YAML if you have troubles: the trigger is provided by Recurrence under “Time and Place” or something similar, then in the actions search for “Home Assistant Core Integration: Reload config entry” or similar: now simply put in any entity belonging to MyHome integration.
You’re now good to go.

[imfreddie]

i think i sorted it. i looked up the HA community and used one of the example from there, its using the state instead so when it goes unavailable it should reload:

alias: automation_Autofix_Myhome
description: reload the integration myhome
trigger:
  - platform: state
    entity_id:
      - light.light_attic
    to: unavailable
condition: []
action:
  - action: homeassistant.reload_config_entry
    target:
      entity_id: light.light_attic
    data: {}
mode: single

[riccardilorenzo]

i think i sorted it. i looked up the HA community and used one of the example from there, its using the state instead so when it goes unavailable it should reload:

alias: automation_Autofix_Myhome
description: reload the integration myhome
trigger:
  - platform: state
    entity_id:
      - light.light_attic
    to: unavailable
condition: []
action:
  - action: homeassistant.reload_config_entry
    target:
      entity_id: light.light_attic
    data: {}
mode: single

Do your entities show as unavailable in the GUI or just "unresponsive" as described in the issue?

[fepl1978]

When configuring a light e.g. having A8 PL9 with '0809' it is possible to switch it in/off but the status will mit update. When using adress '89' it perfectly works. The only issue is with dimmable Lights with F418. Switching on/Off works but dimming cauaes an issue, i.e. the status no longer Updates.
Any Idea how to fix that?

[imfreddie]

i think i sorted it. i looked up the HA community and used one of the example from there, its using the state instead so when it goes unavailable it should reload:

alias: automation_Autofix_Myhome
description: reload the integration myhome
trigger:
  - platform: state
    entity_id:
      - light.light_attic
    to: unavailable
condition: []
action:
  - action: homeassistant.reload_config_entry
    target:
      entity_id: light.light_attic
    data: {}
mode: single

Do your entities show as unavailable in the GUI or just "unresponsive" as described in the issue?

Sorry. Further testing it did not work as the status for the entities stays on or off (even if they stop being updated) so it never trigger the automation. If I run it manually it works. So I guess the only way would be to run it every now and then…

[barto28]

I'm so disapointed this integration is not working anymore. My whole system relies on it and my home assistant becomes totally useless no more control on light, cover and thermals. I guess I'll go back on Jeedom.

[Depechie]

Been following these comments and not sure why, just wanted to say that my MH200N and this integration is still working fine even without the reload trick that is mentioned.

I know this brings no help, but weird that it does not affect everyone.