ACT profile characteristics

[divyakrishnankutty]

Quoting from https://www.aerospike.com/docs/operations/plan/ssd/ssd_certification.html#pcie-nvme-based-flash These devices were tested at the specified speed with a 67% read/33% write ratio of 1.5 KB objects over 24 hours.

How to determine or specify the read/write ratio in the the config file? does the read/write ratio include both reads and large-block-reads?

1x load has 2000 reads/sec and 1000 writes/sec per device, what would be the read-write ratio here?

Thanks.