YKUSH XS

[albersaber]

i am tring to turn on / off KUSH XS by using pykush but i can't !!

$ python pykush.py --list
listing YKUSH family devices
found a release 2 device with serial number
system device path 0003:0008:00, vendor id 0x04d8, product id 0xf0cd
control functions are not available, the device is working in bootloader mode

$ python pykush.py -d
managing YKUSH family devices
found a release 2 device with serial number
system device path 0003:0008:00, vendor id 0x04d8, product id 0xf0cd
control functions are not available, the device is working in bootloader mode

$ python pykush.py -u
managing YKUSH family devices
found a release 2 device with serial number
system device path 0003:0008:00, vendor id 0x04d8, product id 0xf0cd
control functions are not available, the device is working in bootloader mode

[cladmi]

You need to run it as root or if you are in the plugdev group use the udev rule to list the serial numbers at least:

# YkushXS udev
ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="f0cd", MODE="660", GROUP="plugdev"

But it currently still cannot put it up or down.