xclbin_get_freq.pl: command not found #9
Description
Making 'run_hw' seems work OK, but it reports /bin/bash: xclbin_get_freq.pl: command not found, which can be found from the message below.
$ make run_hw SDA_FLOW=hw GEMX_ddrWidth=32 GEMX_numKernels=1\
GEMX_runGemv=0 GEMX_runGemm=1 GEMX_runTransp=0\
GEMX_part=kcu1500\
GEMX_kernelHlsFreq=250\
GEMX_kernelVivadoFreq=250
Here is last few lines of message.
Output message (Click to expand)
... ...
unning xbinst...
/opt/Xilinx/SDx/2018.2/platforms/../bin/xbinst --platform_repo_paths=/opt/Xilinx/SDx/2018.2/platforms/xilinx_kcu1500_dynamic_5_0 --platform xilinx_kcu1500_dynamic_5_0 -d out_hw
****** xbinst v2018.2 (64-bit)
**** SW Build 2258646 on Thu Jun 14 20:02:38 MDT 2018
** Copyright 1986-2018 Xilinx, Inc. All Rights Reserved.
Attempting to get a license: ap_opencl
Feature available: ap_opencl
INFO: [XBINST 60-895] Target platform: /opt/Xilinx/SDx/2018.2/platforms/xilinx_kcu1500_dynamic_5_0/xilinx_kcu1500_dynamic_5_0.xpfm
INFO: [XBINST 60-267] Packaging for PCIe...
INFO: [XBINST 60-1032] Extracting DSA to ./.Xil/xbinst-30085-kal-Z87-HD3/xilinx_kcu1500_dynamic_5_0
INFO: Adding section [CLEARING_BITSTREAM (1)] using: 'xilinx_kcu1500_' (1686170 Bytes)
INFO: Adding section [FIRMWARE (3)] using: 'mgmt' (23192 Bytes)
INFO: Adding section [SCHED_FIRMWARE (5)] using: 'sched' (9748 Bytes)
Successfully completed 'xclbincat'
INFO: [XBINST 60-268] Packaging for PCIe...COMPLETE
INFO: [XBINST 60-667] xbinst has successfully created a board installation directory at /mnt/adki/work/seminars/20180403_OpenCL/master/codes.ref.sdaccel/Xilinx_Gemm/gemx/gemx.adki/out_hw.
/bin/bash: xclbin_get_freq.pl: command not found
INFO: kernel xclbin frequency is MHz
INFO: THE BOARD RUN WILL USE out_host/gemx_host.exe out_hw/gemx.xclbin out_host/app.bin out_hw/app_out.bin
My environment at local.
- Vivado 2018.2 with SDx 2018.2
- KCU1500