RAW EXT4 drive dissappears after initial boot and pre-roll

[tvtechdir]

Running v3.2 on an RPi5. Will Whang's IMX585 Starlight Eye and CFE Hat. Media formatted EXT4 named RAW.

Initial boot as normal. Cinemate starts, does the drive test, everything sets up normal. After two minutes the RAW drive disappears. Only restarting Cinemate via CLI will bring the drive back (MAKE STOP, CINEMATE), after the restart the drive is solid.

[tvtechdir]

Here's the log lines when the drive unmounts after initial boot, Cinemate start and preroll warm up:

2026-01-17 01:18:32.154: INFO: redis_controller Changed value: storage_type = none
2026-01-17 01:18:32.155: INFO: redis_controller Changed value: is_mounted = 0
2026-01-17 01:18:32.157: INFO: redis_controller Changed value: space_left = 0
2026-01-17 01:18:32.157: INFO: redis_controller Changed value: write_speed_to_drive = 0
2026-01-17 01:18:32.158: INFO: ssd_monitor RAW drive unmounted from /media/RAW

Cinemate Boot Log.txt

[tvtechdir]

I'm sure this is not a permanent fix but I've disabled /etc/systemd/system/ssd-automount@.service. There's some kind of conflict between how the Cinemate and the system are handling the drive at the same time.