diff --git a/home/sovol/kiauh-backups/configs/240302-0347/printer_data/config/Macro.cfg b/home/sovol/kiauh-backups/configs/240302-0347/printer_data/config/Macro.cfg
index ac98930..e3238e7 100755
--- a/home/sovol/kiauh-backups/configs/240302-0347/printer_data/config/Macro.cfg
+++ b/home/sovol/kiauh-backups/configs/240302-0347/printer_data/config/Macro.cfg
@@ -485,7 +485,7 @@ gcode:
                 G1 E10 F150
                 G90
             {% endif %}
-            {action_respond_info("Print resumming!")}
+            {action_respond_info("Print resuming!")}
             RESUME_BASE
         {% endif %}
     {% elif state == 'normal' %}
@@ -494,7 +494,7 @@ gcode:
         %}
             {action_respond_info("Please Insert filament in Sensor!")}
         {% else %}
-            {action_respond_info("Print resumming!")}
+            {action_respond_info("Print resuming!")}
             G91
             G1 E{e_restract} F300
             G90
diff --git a/home/sovol/kiauh-backups/configs/240312-0848/printer_data/config/Macro.cfg b/home/sovol/kiauh-backups/configs/240312-0848/printer_data/config/Macro.cfg
index 70da62b..6b271b3 100755
--- a/home/sovol/kiauh-backups/configs/240312-0848/printer_data/config/Macro.cfg
+++ b/home/sovol/kiauh-backups/configs/240312-0848/printer_data/config/Macro.cfg
@@ -497,7 +497,7 @@ gcode:
                 G1 E10 F150
                 G90
             {% endif %}
-            {action_respond_info("Print resumming!")}
+            {action_respond_info("Print resuming!")}
             RESUME_BASE
         {% endif %}
     {% elif state == 'normal' %}
@@ -506,7 +506,7 @@ gcode:
         %}
             {action_respond_info("Please Insert filament in Sensor!")}
         {% else %}
-            {action_respond_info("Print resumming!")}
+            {action_respond_info("Print resuming!")}
             G91
             G1 E{e_restract} F300
             G90
diff --git a/home/sovol/kiauh-backups/configs/240312-0855/printer_data/config/Macro.cfg b/home/sovol/kiauh-backups/configs/240312-0855/printer_data/config/Macro.cfg
index 70da62b..6b271b3 100755
--- a/home/sovol/kiauh-backups/configs/240312-0855/printer_data/config/Macro.cfg
+++ b/home/sovol/kiauh-backups/configs/240312-0855/printer_data/config/Macro.cfg
@@ -497,7 +497,7 @@ gcode:
                 G1 E10 F150
                 G90
             {% endif %}
-            {action_respond_info("Print resumming!")}
+            {action_respond_info("Print resuming!")}
             RESUME_BASE
         {% endif %}
     {% elif state == 'normal' %}
@@ -506,7 +506,7 @@ gcode:
         %}
             {action_respond_info("Please Insert filament in Sensor!")}
         {% else %}
-            {action_respond_info("Print resumming!")}
+            {action_respond_info("Print resuming!")}
             G91
             G1 E{e_restract} F300
             G90
diff --git a/home/sovol/kiauh-backups/configs/240312-0858/printer_data/config/Macro.cfg b/home/sovol/kiauh-backups/configs/240312-0858/printer_data/config/Macro.cfg
index 70da62b..6b271b3 100755
--- a/home/sovol/kiauh-backups/configs/240312-0858/printer_data/config/Macro.cfg
+++ b/home/sovol/kiauh-backups/configs/240312-0858/printer_data/config/Macro.cfg
@@ -497,7 +497,7 @@ gcode:
                 G1 E10 F150
                 G90
             {% endif %}
-            {action_respond_info("Print resumming!")}
+            {action_respond_info("Print resuming!")}
             RESUME_BASE
         {% endif %}
     {% elif state == 'normal' %}
@@ -506,7 +506,7 @@ gcode:
         %}
             {action_respond_info("Please Insert filament in Sensor!")}
         {% else %}
-            {action_respond_info("Print resumming!")}
+            {action_respond_info("Print resuming!")}
             G91
             G1 E{e_restract} F300
             G90
diff --git a/home/sovol/patch/config/Macro.cfg b/home/sovol/patch/config/Macro.cfg
index e584b9d..389db14 100755
--- a/home/sovol/patch/config/Macro.cfg
+++ b/home/sovol/patch/config/Macro.cfg
@@ -513,7 +513,7 @@ gcode:
                 G1 E10 F150
                 G90
             {% endif %}
-            {action_respond_info("Print resumming!")}
+            {action_respond_info("Print resuming!")}
             RESUME_BASE
         {% endif %}
     {% elif state == 'normal' %}
@@ -522,7 +522,7 @@ gcode:
         %}
             {action_respond_info("Please Insert filament in Sensor!")}
         {% else %}
-            {action_respond_info("Print resumming!")}
+            {action_respond_info("Print resuming!")}
             G91
             G1 E{e_restract} F300
             G90
diff --git a/home/sovol/printer_data/config/Macro.cfg b/home/sovol/printer_data/config/Macro.cfg
index e584b9d..389db14 100755
--- a/home/sovol/printer_data/config/Macro.cfg
+++ b/home/sovol/printer_data/config/Macro.cfg
@@ -513,7 +513,7 @@ gcode:
                 G1 E10 F150
                 G90
             {% endif %}
-            {action_respond_info("Print resumming!")}
+            {action_respond_info("Print resuming!")}
             RESUME_BASE
         {% endif %}
     {% elif state == 'normal' %}
@@ -522,7 +522,7 @@ gcode:
         %}
             {action_respond_info("Please Insert filament in Sensor!")}
         {% else %}
-            {action_respond_info("Print resumming!")}
+            {action_respond_info("Print resuming!")}
             G91
             G1 E{e_restract} F300
             G90