From 60ad4a7899db1d52c48eb4765ace08bd492cd082 Mon Sep 17 00:00:00 2001 From: Daniel Wirick <10109058+speedbug78@users.noreply.github.com> Date: Wed, 16 Oct 2019 17:13:13 -0700 Subject: [PATCH] Update Grove-6-Axis_Accelerometer&Gyroscope(BMI088).md Address change jumper on accelerometer is incorrectly routed. To change addresses the route must be cut and the "High" pin soldered to ground. Please upload a fixed image rather than keep my drive link. --- docs/Grove-6-Axis_Accelerometer&Gyroscope(BMI088).md | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/docs/Grove-6-Axis_Accelerometer&Gyroscope(BMI088).md b/docs/Grove-6-Axis_Accelerometer&Gyroscope(BMI088).md index 55106012..4ded6a9a 100644 --- a/docs/Grove-6-Axis_Accelerometer&Gyroscope(BMI088).md +++ b/docs/Grove-6-Axis_Accelerometer&Gyroscope(BMI088).md @@ -47,7 +47,9 @@ The Grove - 6-Axis Accelerometer&Gyroscope(BMI088) is a 6 DoF(degrees of freedom ![](https://github.com/SeeedDocument/Grove-6-Axis_Accelerometer-Gyroscope-BMI088/raw/master/img/pin_out.jpg) -![](https://github.com/SeeedDocument/Grove-6-Axis_Accelerometer-Gyroscope-BMI088/raw/master/img/pin_out_back.jpg) +!!!Attention The address change jumper for Accel is routed incorrectly. To change the address from 0x19 to 0x18 a trace must be cut and the "High" pin soldered to ground. See image below. + +![](https://drive.google.com/uc?export=view&id=1sKL_shSdHQDBu0-SOb57ltgELyCfaFrT) ### Schemaitc @@ -251,4 +253,4 @@ This is the introduction Video of this product, simple demos, you can have a try ## Tech Support -Please do not hesitate to submit the issue into our [forum](https://forum.seeedstudio.com/)

\ No newline at end of file +Please do not hesitate to submit the issue into our [forum](https://forum.seeedstudio.com/)