Deploy

Author: github-actions[bot]

wire-tool-v1.1/user-manual/images/MAGNET_Front_Lower_Cover_1.png

@@ -320,13 +320,6 @@ <h3 id="tool-mount">Tool Mount</h3>
 <p><img src="images/MAIN_Tool_Mount_1.png" alt="Tool_Mount_Magnet">
 <img src="images/MAGNET_Tool_Mount_1.png" alt="Tool_Mount_Magnet">
 <img src="images/MAGNET_Tool_Mount_2.png" alt="Tool_Mount_Magnet"></p>
-<h3 id="tensioner-body">Tensioner Body</h3>
-<p><img src="images/MAGNET_Tensioner_Body_1.png" alt="Tensioner_Body_Magnet">
-<img src="images/MAGNET_Tensioner_Body_2.png" alt="Tensioner_Body_Magnet"></p>
-<h3 id="flushing-cap">Flushing Cap</h3>
-<p><img src="images/MAIN_Flushing_Cap_1.png" alt="Flushing_Cap_Magnet">
-<img src="images/MAGNET_Flushing_Cap_1.png" alt="Flushing_Cap_Magnet">
-<img src="images/MAGNET_Flushing_Cap_2.png" alt="Flushing_Cap_Magnet"></p>
 <h3 id="front-lower-cover">Front Lower Cover</h3>
 <p><img src="images/MAIN_Front_Lower_Cover_1.png" alt="Front_Lower_Cover_Magnet">
 <img src="images/MAIN_Front_Lower_Cover_2.png" alt="Front_Lower_Cover_Magnet">
@@ -449,7 +442,7 @@ <h3 id="tension-arm-1">Tension Arm</h3>
 <p><strong>ALERT.</strong> Use caution when installing M5x12 BHCS. This screws directly into plastic on the rear side. Install with light force until snug in part. Do not overtighten and strip hole.</p>
 <p><img src="images/ASSM_Tension_Arm_4.png" alt="Tension_Arm_Assm">
 <img src="images/ASSM_Tension_Arm_5.png" alt="Tension_Arm_Assm"></p>
-<h3 id="flushing-cap-1">Flushing Cap</h3>
+<h3 id="flushing-cap">Flushing Cap</h3>
 <p>Requires:</p>
 <ul>
 <li>Flushing Cap Print</li>
@@ -458,7 +451,7 @@ <h3 id="flushing-cap-1">Flushing Cap</h3>
 <p><img src="images/ASSM_Flushing_Cap_1.png" alt="Flushing_Cap_Assm">
 <img src="images/ASSM_Flushing_Cap_2.png" alt="Flushing_Cap_Assm">
 <img src="images/ASSM_Flushing_Cap_3.png" alt="Flushing_Cap_Assm"></p>
-<h3 id="tensioner-body-1">Tensioner Body</h3>
+<h3 id="tensioner-body">Tensioner Body</h3>
 <p>Requires:</p>
 <ul>
 <li>Tensioner Body Print</li>
@@ -507,7 +500,7 @@ <h3 id="back-lower-base-1">Back Lower Base</h3>
 <img src="images/ASSM_Back_Lower_Base_3.png" alt="Back_Lower_Base_Assm">
 <img src="images/ASSM_Back_Lower_Base_4.png" alt="Back_Lower_Base_Assm">
 <img src="images/ASSM_Back_Lower_Base_5.png" alt="Back_Lower_Base_Assm"></p>
-<h3 id="tensioner-body-2">Tensioner Body</h3>
+<h3 id="tensioner-body-1">Tensioner Body</h3>
 <p>Requires:</p>
 <ul>
 <li>Tensioner Assembly</li>