Deploy

Author: github-actions[bot]

wire-tool-v1.1/user-manual/images/ASSM_Idler_1.png

@@ -160,7 +160,7 @@ <h3 id="slicer-settings">Slicer Settings</h3>
 </tr>
 <tr>
 <td>Generate Supports</td>
-<td>No</td>
+<td>Yes</td>
 </tr>
 </tbody>
 </table>
@@ -208,21 +208,9 @@ <h3 id="required-files">Required Files</h3>
 <td>N</td>
 </tr>
 <tr>
-<td>Fastener Cap</td>
+<td>Front Base</td>
 <td>1</td>
 <td>N</td>
-<td>N</td>
-</tr>
-<tr>
-<td>Flushing Cap</td>
-<td>1</td>
-<td>N</td>
-<td>N</td>
-</tr>
-<tr>
-<td>Front Base Cover</td>
-<td>1</td>
-<td>Y</td>
 <td>Y</td>
 </tr>
 <tr>
@@ -232,30 +220,12 @@ <h3 id="required-files">Required Files</h3>
 <td>N</td>
 </tr>
 <tr>
-<td>Insulating Boss</td>
-<td>1</td>
-<td>N</td>
-<td>N</td>
-</tr>
-<tr>
 <td>Motor Cover</td>
 <td>1</td>
 <td>N</td>
 <td>N</td>
 </tr>
 <tr>
-<td>Motor Mount</td>
-<td>1</td>
-<td>N</td>
-<td>N</td>
-</tr>
-<tr>
-<td>Pinch Roller Bushing</td>
-<td>1</td>
-<td>N</td>
-<td>N</td>
-</tr>
-<tr>
 <td>Spool Puller</td>
 <td>1</td>
 <td>N</td>
@@ -268,13 +238,7 @@ <h3 id="required-files">Required Files</h3>
 <td>Y</td>
 </tr>
 <tr>
-<td>Tensioner Body</td>
-<td>1</td>
-<td>N</td>
-<td>Y</td>
-</tr>
-<tr>
-<td>Tensioner Cover</td>
+<td>Front     Cover</td>
 <td>1</td>
 <td>Y</td>
 <td>N</td>
@@ -309,7 +273,7 @@ <h2 id="magnet-installation">Magnet Installation</h2>
 <p>Magnets are used to retain safety covers on the WT-01. All magnets provided are M6x2. Magnets should fit snugly into their recesses, a small drop of super glue will prevent the magnets from working their way out after many cycles of cover installation and removal. Installation may be eased with the use of a steel rod to press magnets into place.</p>
 <p><strong>IMPORTANT.</strong> Ensure all magnets are installed in matching orientation into base parts and covers. This may be simply achieved by first installing the magnets into all covers and subsequently placing another magnet on each installed magnet. The secondary placed magnet may be carefully removed and installed in matching orientation in the base part.</p>
 <p>Install magnets in accordance with the following images:</p>
-<h3 id="front-lower-base">Front Lower Base</h3>
+<h3 id="front-base-1">Front Base</h3>
 <p><img src="images/MAGNET_Lower_Front_Base_1.png" alt="Front_Base_Magnet">
 <img src="images/MAGNET_Lower_Front_Base_2.png" alt="Front_Base_Magnet"></p>
 <h3 id="back-lower-base">Back Lower Base</h3>
@@ -433,11 +397,11 @@ <h3 id="tension-arm-1">Tension Arm</h3>
 <p><strong>ALERT.</strong> Use caution when installing M5x12 BHCS. This screws directly into plastic on the rear side. Install with light force until snug in part. Do not overtighten and strip hole.</p>
 <p><img src="images/ASSM_Tension_Arm_4.png" alt="Tension_Arm_Assm">
 <img src="images/ASSM_Tension_Arm_5.png" alt="Tension_Arm_Assm"></p>
-<h3 id="flushing-cap">Flushing Cap</h3>
+<h3 id="ceramic-guides">Ceramic Guides</h3>
 <p>Requires:</p>
 <ul>
-<li>Flushing Cap Print</li>
-<li>Ceramic Wire Guide</li>
+<li>Front Base Print</li>
+<li>Ceramic Wire Guides</li>
 </ul>
 <p><img src="images/ASSM_Flushing_Cap_1.png" alt="Flushing_Cap_Assm">
 <img src="images/ASSM_Flushing_Cap_2.png" alt="Flushing_Cap_Assm">
@@ -463,7 +427,7 @@ <h3 id="tensioner-body">Tensioner Body</h3>
 <h2 id="final-assembly">Final Assembly</h2>
 <p>Once subcomponents have been assembled, final assembly may begin.</p>
 <p>Complete the mechanical assembly of the WT-01 in accordance with the following images:</p>
-<h3 id="front-lower-base-1">Front Lower Base</h3>
+<h3 id="front-lower-base">Front Lower Base</h3>
 <p>Requires:</p>
 <ul>
 <li>Endoskeleton</li>