diff --git a/examples/FastPin.pde b/examples/FastPin/FastPin.pde
similarity index 94%
rename from examples/FastPin.pde
rename to examples/FastPin/FastPin.pde
index b4344f1..3026596 100644
--- a/examples/FastPin.pde
+++ b/examples/FastPin/FastPin.pde
@@ -1,79 +1,79 @@
-#include <pin.h>
-
-//output for flashing LED;
-#define LED 7
-//Button Input
-#define BUTTON 8
-
-//New pin class
-pin led,
-    button;
-
-void setup()
-{
-  //Old way off defining digital pin directions.
-  pinMode(LED,OUTPUT);
-  pinMode(BUTTON,OUTPUT);
-  //New way
-  led.setup(LED,OUTPUT);
-  button.setup(BUTTON,OUTPUT);
-  Serial.begin(9600);
-}
-
-void loop()
-{
-  int i;
-  unsigned long time1,
-                time2,
-                oldtime,
-                newtime;
-  
-  time1=micros();
-  //cycle the led output using the old control 100 times
-  for(i=0;i<100;i++)
-  {
-    digitalWrite(LED,HIGH);
-    digitalWrite(LED,LOW);
-  }
-  time2=micros();
-  oldtime=time2-time1;
-  Serial.print("Old method: ");
-  Serial.print(oldtime);
-  Serial.println("ms");
-  
-  time1=micros();
-  for(i=0;i<100;i++)
-  {
-    led.set(HIGH);
-    led.set(LOW);
-  }
-  time2=micros();
-  newtime=time2-time1;
-  Serial.print("New method: ");
-  Serial.print(newtime);
-  Serial.println("ms");
-  
-  i=0; 
-  while(i<100)
-  {
-   //Old method of reading digital lines
-    if(digitalRead(BUTTON))
-      i++;
-  }
-  Serial.println("Old digital read done");
-
-  i=0; 
-  while(i<100)
-  {
-   //New method of reading digital lines
-    if(button.get())
-      i++;
-  }
-  Serial.println("New digital read done");
-
-  while(1)
-  {}
-}
-
-
+#include <pin.h>
+
+//output for flashing LED;
+#define LED 7
+//Button Input
+#define BUTTON 8
+
+//New pin class
+pin led,
+    button;
+
+void setup()
+{
+  //Old way off defining digital pin directions.
+  pinMode(LED,OUTPUT);
+  pinMode(BUTTON,OUTPUT);
+  //New way
+  led.setup(LED,OUTPUT);
+  button.setup(BUTTON,OUTPUT);
+  Serial.begin(9600);
+}
+
+void loop()
+{
+  int i;
+  unsigned long time1,
+                time2,
+                oldtime,
+                newtime;
+  
+  time1=micros();
+  //cycle the led output using the old control 100 times
+  for(i=0;i<100;i++)
+  {
+    digitalWrite(LED,HIGH);
+    digitalWrite(LED,LOW);
+  }
+  time2=micros();
+  oldtime=time2-time1;
+  Serial.print("Old method: ");
+  Serial.print(oldtime);
+  Serial.println("ms");
+  
+  time1=micros();
+  for(i=0;i<100;i++)
+  {
+    led.set(HIGH);
+    led.set(LOW);
+  }
+  time2=micros();
+  newtime=time2-time1;
+  Serial.print("New method: ");
+  Serial.print(newtime);
+  Serial.println("ms");
+  
+  i=0; 
+  while(i<100)
+  {
+   //Old method of reading digital lines
+    if(digitalRead(BUTTON))
+      i++;
+  }
+  Serial.println("Old digital read done");
+
+  i=0; 
+  while(i<100)
+  {
+   //New method of reading digital lines
+    if(button.get())
+      i++;
+  }
+  Serial.println("New digital read done");
+
+  while(1)
+  {}
+}
+
+