From 704cdd4053da5b5f44ec34c0b15b855a5fe59ea4 Mon Sep 17 00:00:00 2001
From: per1234 <accounts@perglass.com>
Date: Sat, 21 Jul 2018 20:13:05 -0700
Subject: [PATCH] Move example sketch to appropriately named folder

The Arduino IDE requires the sketch folder name to match the filename of the primary sketch file. This change causes the example sketch to be accessible via the Arduino IDE's File > Examples > LIBRARYNAME menu after the library is installed.

Reference:
https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5:-Library-specification#library-examples
---
 examples/{ => Encoder}/Encoder.pde | 66 +++++++++++++++---------------
 1 file changed, 33 insertions(+), 33 deletions(-)
 rename examples/{ => Encoder}/Encoder.pde (94%)

diff --git a/examples/Encoder.pde b/examples/Encoder/Encoder.pde
similarity index 94%
rename from examples/Encoder.pde
rename to examples/Encoder/Encoder.pde
index cfb8445..758c82b 100644
--- a/examples/Encoder.pde
+++ b/examples/Encoder/Encoder.pde
@@ -1,34 +1,34 @@
-
-#include <pin.h>
-#include <encoder.h>
-
-
-
-void setup()
-{
-  Serial.begin(9600);
-}
-
-void loop()
-{
-
-  Encoder.setMin(0);
-  Encoder.setMax(100);
-  Encoder.begin(2,4,11,1,ALPS);
-  
-  while(1)
-  {    
-    if((Encoder.change()>-1) || Encoder.getEnter())
-    {
-       
-       Serial.print("Count:");
-       Serial.print(Encoder.getCount(),DEC);
-       if(Encoder.ok())
-         Serial.println("enter = OK");
-       else if(Encoder.cancel())
-         Serial.println("enter = CANCEL");
-       else
-         Serial.println("enter = NONE");
-    }
-  }
+
+#include <pin.h>
+#include <encoder.h>
+
+
+
+void setup()
+{
+  Serial.begin(9600);
+}
+
+void loop()
+{
+
+  Encoder.setMin(0);
+  Encoder.setMax(100);
+  Encoder.begin(2,4,11,1,ALPS);
+  
+  while(1)
+  {    
+    if((Encoder.change()>-1) || Encoder.getEnter())
+    {
+       
+       Serial.print("Count:");
+       Serial.print(Encoder.getCount(),DEC);
+       if(Encoder.ok())
+         Serial.println("enter = OK");
+       else if(Encoder.cancel())
+         Serial.println("enter = CANCEL");
+       else
+         Serial.println("enter = NONE");
+    }
+  }
 }