Components on the Spinner PCB

[HEN3DRIK]

Hi, I ordered the board. Would you be so kind and give me the values of the components I have to solder on? I can see two resistors and a tiny led but what's on the pad next to the encoder pads? Links would be excellent but i'm already glad if i can just search for the correct components. Thank you!

[Niels3RT]

Hi! I cant give you links to the parts, i used parts i had lying around. Its all 1206 SMD parts. The two resistors are 470 Ohm, if the LEDs are too bright, use higher values to reduce the current, that depends on the LEDs you are using. Next to the encoder pads is a ceramic capacitor to smooth the power supply. I used 100nF but its really not critical 1uF or even 10uF will work. Have fun! Niels Am 21. Januar 2025 20:32:02 MEZ schrieb HEN3DRIK ***@***.***>:

…

Hi, I ordered the board. Would you be so kind and give me the values of the components I have to solder on? I can see two resistors and a tiny led but what's on the pad next to the encoder pads? Links would be excellent but i'm already glad if i can just search for the correct components. Thank you! -- Reply to this email directly or view it on GitHub: #1 You are receiving this because you are subscribed to this thread. Message ID: ***@***.***>

[hvogelpohl1337]

Thank you for your reply!