I2C RAM/FRAM/MRAM library. Derived from uEEPROMLib https://github.com/Naguissa/uEEPROMLib , it maintains same operation principle.
This library controls any I2C RAM. It's based on FM24CL16 FRAM but should work with any.
*Note: On ATTiny, you need TnyWireM library in order to compile. It's available on Library manager.
| Item | uEEPROMLib | uRAMLib |
|---|---|---|
| Internal delay in I2C operation | 6ms | 1ms (may be 0) |
| Reading / Writing operation mode | Paged | Banked |
| Adressing | Direct (2 bytes) | Base + remaining (1+1 bytes) |
You can get it from Arduino libraries directly, searching by uRAMLib.
For manual installation:
- Get the ZIP.
- Rename to uRAMLib.zip
- Install library on Arduino
You can find all documentation and extras in this repository: https://github.com/Naguissa/uRAMLib_doc_and_extras
You can read documentation online here: https://naguissa.github.io/uRAMLib_doc_and_extras/
Included on example folder, available on Arduino IDE.
Any code contribution, report or comment are always welcome. Don't hesitate to use GitHub for that.
- You can sponsor this project using GitHub's Sponsor button: https://github.com/Naguissa/uRAMLib
- You can make a donation via PayPal: https://paypal.me/foroelectro
Thanks for your support.
Contributors hall of fame: https://www.foroelectro.net/hall-of-fame-f32/contributors-contribuyentes-t271.html