This repository is a "development environment" - and no regular user would have to touch this at all (dont download the repo from here, use the Download links below)
Releases are made available on https://github.com/Rack-Robotics/EDMWeb-Binaries/
Please use the community forum on https://forum.makerforums.info/c/laserweb-cncweb for questions and support. Please only report confirmed bugs on the git Issues tab.
Note: Ever changing. See the Issues tab above for details.
| Firmware | Supported | Raster Performance | CNC Support | Pull Requests Accepted |
|---|---|---|---|---|
| Grbl > v1.1f (ATmega328) | Yes | Good | Great | Yes - improvements |
| Grbl-Mega (ATmega2560) | Yes | Good | Great | Yes - improvements |
| Grbl-LPC (LPC176x) | Yes | Great | Great | Yes - improvements |
| Grbl_ESP32 (ESP32) | Yes | Great | Great | Yes - improvements |
| Smoothieware | Yes * | Okayish | Okayish | Yes - improvements |
| TinyG | Yes | Unknown | Good | Yes - improvements |
| Marlin | Yes | Unknown | No | Yes - improvements |
| MarlinKimbra | Yes | Unknown | No | Yes - improvements |
| Repetier | Yes | Unknown | No | Yes - improvements |
| RepRapFirmware | Yes | Unknown | Yes | Yes - improvements |
- If fast raster engraving is important for you, we recommend replacing Smoothieware with grbl-LPC (https://github.com/cprezzi/grbl-LPC) which also runs on the LPC1769 based boards and performs much faster for laser raster applications.