Token size issue

[Taurias]

Two days ago, I updated my foundry and tokenizer to the latest (release) versions.
Since then I've been having the strangest issue. Tokens made before then are normal regular sized, tokens made after then, that I've used tokenizer to make tokens for, are too large.
https://cdn.discordapp.com/attachments/697845559435853865/1459637067540594933/image.png?ex=69640073&is=6962aef3&hm=9a852439fd1e6ec2014c844c3495fce28f87ce12aabe383cf9c0f35755887e4d&
These two tokens are both medium in size.
This is the size setting on the left:
https://cdn.discordapp.com/attachments/697845559435853865/1459637219084996731/image.png?ex=69640097&is=6962af17&hm=2ec433b4a715bf30fb8b6d85ac3c5b0300832f6ff227f5205f083c2175668ab4&
Size setting on the right:
https://cdn.discordapp.com/attachments/697845559435853865/1459637254690705632/image.png?ex=696400a0&is=6962af20&hm=d813c38012197d457014f2a4a039ed6263c8cc792c2af107f84304ab3613c112&

Making tokens without tokenizer gives me normal sized tokens. Making tokens with tokenizer gives me these slightly larger tokens.
As far as I know I havent tinkered with any settings or changed anything.
For reference, I'm in foundry build 351, and tokenizer version 4.6.4

Additional experimentation shows me that the quick token feature makes tokens the correct size, but making a token makes them too large.

[MrPrimate]

Which system are you using, and what version?

[MrPrimate]

The size settings in the uploaded images are the same, so not sure if those are correct.

Are you adjusting images that are coming through on actors in modules? Or are these created from scratch?

[XtraButtery]

I can't see the attached screenshots for the original report, but I'm experiencing what sounds like the same issue. When creating tokens in the latest two versions, the prototyped tokens are somehow larger than the tile they are supposed to be constrained to.

My steps to replicate this were to take a sheet, open tokeniser, add my image from actor image, add a frame from the Add Frame button and create the token.

Downgrading to 4.6.2 resolved this issue.

[XFrozenSoilX]

Using D&D5E with Dynamic Token Ring. The "Subject Texture" is now being set when it didn't used to be. When using "Dynamic Token Rings Fit Modes -> Grid", Putting a texture in this spot causes it to be oversized. Clearing this "Subject Texture" fixes the issue.

[Taurias]

The size settings in the uploaded images are the same, so not sure if those are correct.

Are you adjusting images that are coming through on actors in modules? Or are these created from scratch?

Yeah, they are shown as the same despite being different. One is clearly larger, but no setting I can find shows it actually being larger. I've fixed the issue for now downgrading to 4.6.2.
And I'm on PF2e.
I did a ton of messing with it, and any token where I configured the token image using tokenizer somehow got larger. Using pre existing tokens didnt have this effect. Using Quick token didnt have this effect.

[Geodragon9]

Verified on my 2 instances.. Yes, clearing out the subjective texture and it fixes the token size.

[MrPrimate]

Thank you everyone, very helpful. Hopefully v4.6.5 fixes this issue for you all?

[XFrozenSoilX]

Thank you everyone, very helpful. Hopefully v4.6.5 fixes this issue for you all?

This fixed it for me for the initial drag-drop, but if you use the "Apply Prototype Token Image to Scene Tokens" it does the same thing, putting a texture in the "Subject Texture" field and causing the same problem.

I only noticed this because I was using that to "re-roll" all my guards who have wildcard tokens. Tested with and without wildcard tokens and it has the same problem.

[MrPrimate]

This fixed it for me for the initial drag-drop, but if you use the "Apply Prototype Token Image to Scene Tokens" it does the same thing, putting a texture in the "Subject Texture" field and causing the same problem.

I only noticed this because I was using that to "re-roll" all my guards who have wildcard tokens. Tested with and without wildcard tokens and it has the same problem.

This just copies the texture and ring settings from the prototype to the scene token, so suspect that there is something here that differs between the prototype and scene tokens (maybe the dynamic ring setting)

Please can you screnshot the Apperance tab of the actors prototype and the scene token before and after applying.

[XFrozenSoilX]

(Edited for clarity)

The three windows:
Prototype
Fresh Token / Newly Dropped Token straight from the actors tab.
Token after Apply Prototype Token Image to Scene Token

After dropping a fresh token onto the scene, it had the same properties as the prototype token until I used the "Apply Prototype Token Image" feature. I saw the field change in the open token appearance window. I then placed a new token from the Actor's tab again. The new token still matched the prototype with the empty "Subject Texture" field. You can see the difference in the "enlarged" token that has the "Subject Texture" field filled in.

No other modules installed. D&D5E 5.2.4 latest version. Tokenizer 4.6.5

The size issue might be the fault of the D&D system, but it is only caused by putting the token texture in that field (which I'm still not sure why that field exists). I haven't tested it, but I believe it may scale the "Subject Texture" with the ring size when "Dynamic Token Rings Fit Modes" is set to "Grid".

I don't have time to test right now but I think previous versions were also doing this. I think I experienced it in 4.6.2 when I did a temporary rollback.

Thanks for investigating.