以TUN模式退出，再次启动时无法初始化

[escapezn]

以TUN模式退出，再次启动时无法初始化。需要取消TUN模式，或者再退出、启动才能正常使用。

2022-10-23T00:17:35+08:00 [ INFO ] [TUN] Creating adapter
2022-10-23T00:17:50+08:00 [ EROR ] [TUN] Timed out waiting for device query: 等待的操作过时。 (Code 0x00000102)
2022-10-23T00:17:50+08:00 [ EROR ] [TUN] Failed to setup adapter (problem code: 0x1F, ntstatus: 0xC0000035): 当文件已存在时，无法创建该文件。 (Code 0x000000B7)
2022-10-23T00:17:50+08:00 [ EROR ] Start TUN listening error: can't open tun: create tun: Error creating interface: Cannot create a file when that file already exists.

配置

mixed-port: 7890

# Port of HTTP(S) proxy server on the local end
# port: 7890

# Port of SOCKS5 proxy server on the local end
# socks-port: 7891

# Transparent proxy server port for Linux and macOS (Redirect TCP and TProxy UDP)
# redir-port: 7892

# Transparent proxy server port for Linux (TProxy TCP and TProxy UDP)
# tproxy-port: 7893

# HTTP(S) and SOCKS4(A)/SOCKS5 server on the same port
# mixed-port: 7890

# authentication of local SOCKS5/HTTP(S) server
# authentication:
#  - "user1:pass1"
#  - "user2:pass2"

# Set to true to allow connections to the local-end server from
# other LAN IP addresses
allow-lan: true

# This is only applicable when `allow-lan` is `true`
# '*': bind all IP addresses
# 192.168.122.11: bind a single IPv4 address
# "[aaaa::a8aa:ff:fe09:57d8]": bind a single IPv6 address
bind-address: '*'

# Clash router working mode
# rule: rule-based packet routing
# global: all packets will be forwarded to a single endpoint
# direct: directly forward the packets to the Internet
mode: rule

# Clash by default prints logs to STDOUT
# info / warning / error / debug / silent
log-level: info

# When set to false, resolver won't translate hostnames to IPv6 addresses
ipv6: false

# RESTful web API listening address
external-controller: 127.0.0.1:9090

# A relative path to the configuration directory or an absolute path to a
# directory in which you put some static web resource. Clash core will then
# serve it at `http://{{external-controller}}/ui`.
# external-ui: public

# Secret for the RESTful API (optional)
# Authenticate by spedifying HTTP header `Authorization: Bearer ${secret}`
# ALWAYS set a secret if RESTful API is listening on 0.0.0.0
# secret: "dcc2c709-49b7-49fb-a3f0-ea4d7d48894f"

# Outbound interface name
# interface-name: en0

# fwmark on Linux only
# routing-mark: 6666

# Static hosts for DNS server and connection establishment (like /etc/hosts)
#
# Wildcard hostnames are supported (e.g. *.clash.dev, *.foo.*.example.com)
# Non-wildcard domain names have a higher priority than wildcard domain names
# e.g. foo.example.com > *.example.com > .example.com
# P.S. +.foo.com equals to .foo.com and foo.com
hosts:
  # '*.clash.dev': 127.0.0.1
  # '.dev': 127.0.0.1
  # 'alpha.clash.dev': '::1'

profile:
  # Store the `select` results in $HOME/.config/clash/.cache
  # set false If you don't want this behavior
  # when two different configurations have groups with the same name, the selected values are shared
  store-selected: false

  # persistence fakeip
  store-fake-ip: true

# DNS server settings
# This section is optional. When not present, the DNS server will be disabled.
dns:
  enable: true
  listen: 0.0.0.0:53
  # ipv6: false # when the false, response to AAAA questions will be empty

  # These nameservers are used to resolve the DNS nameserver hostnames below.
  # Specify IP addresses only
  default-nameserver:
    - 114.114.114.114
    - 8.8.8.8
  enhanced-mode: fake-ip # or redir-host (not recommended)
  # enhanced-mode: redir-host
  fake-ip-range: 198.18.0.1/16 # Fake IP addresses pool CIDR
  # use-hosts: true # lookup hosts and return IP record

  # Hostnames in this list will not be resolved with fake IPs
  # i.e. questions to these domain names will always be answered with their
  # real IP addresses
  # fake-ip-filter:
  #   - '*.lan'
  #   - localhost.ptlogin2.qq.com

  # Supports UDP, TCP, DoT, DoH. You can specify the port to connect to.
  # All DNS questions are sent directly to the nameserver, without proxies
  # involved. Clash answers the DNS question with the first result gathered.
  nameserver:
    - 114.114.114.114 # default value
    - 8.8.8.8 # default value
    # - tls://dns.rubyfish.cn:853 # DNS over TLS
    # - https://1.1.1.1/dns-query # DNS over HTTPS
    # - dhcp://en0 # dns from dhcp
    # - '8.8.8.8#en0'

  # When `fallback` is present, the DNS server will send concurrent requests
  # to the servers in this section along with servers in `nameservers`.
  # The answers from fallback servers are used when the GEOIP country
  # is not `CN`.
  # fallback:
  #   - tls://dns.rubyfish.cn:853
    # - 'tcp://1.1.1.1#en0'

  # If IP addresses resolved with servers in `nameservers` are in the specified
  # subnets below, they are considered invalid and results from `fallback`
  # servers are used instead.
  #
  # IP address resolved with servers in `nameserver` is used when
  # `fallback-filter.geoip` is true and when GEOIP of the IP address is `CN`.
  #
  # If `fallback-filter.geoip` is false, results from `nameserver` nameservers
  # are always used if not match `fallback-filter.ipcidr`.
  #
  # This is a countermeasure against DNS pollution attacks.
  # fallback-filter:
  #   geoip: true
  #   geoip-code: CN
  #   ipcidr:
  #     - 240.0.0.0/4
  #   domain:
  #     - '+.google.com'
  #     - '+.facebook.com'
  #     - '+.youtube.com'

  # Lookup domains via specific nameservers
  # nameserver-policy:
  #   'www.baidu.com': '114.114.114.114'
  #   '+.internal.crop.com': '10.0.0.1'

proxies:
  # Shadowsocks
  # The supported ciphers (encryption methods):
  #   aes-128-gcm aes-192-gcm aes-256-gcm
  #   aes-128-cfb aes-192-cfb aes-256-cfb
  #   aes-128-ctr aes-192-ctr aes-256-ctr
  #   rc4-md5 chacha20-ietf xchacha20
  #   chacha20-ietf-poly1305 xchacha20-ietf-poly1305
  - name: "ss"
    type: ss
    server: 
    port: 80
    cipher: aes-128-gcm
    password: 
    plugin: v2ray-plugin
    plugin-opts:
      mode: websocket # no QUIC now
      tls: false
      # skip-cert-verify: true
      host: 
      path: 
      mux: false
      # headers:
      #   custom: value

  # socks5
  - name: "socks"
    type: socks5
    server: 127.0.0.1
    port: 1080
    # username: username
    # password: password
    # tls: true
    # skip-cert-verify: true
    # udp: true

proxy-groups:
  # select is used for selecting proxy or proxy group
  # you can use RESTful API to switch proxy is recommended for use in GUI.
  - name: Proxy
    type: select
    # disable-udp: true
    proxies:
      - ssgr
      - ssha

rule-providers:
  proxy:
    type: http
    behavior: domain
    url: "https://cdn.jsdelivr.net/gh/Loyalsoldier/clash-rules@release/proxy.txt"
    path: ./ruleset/proxy.yaml
    interval: 86400

  private:
    type: http
    behavior: domain
    url: "https://cdn.jsdelivr.net/gh/Loyalsoldier/clash-rules@release/private.txt"
    path: ./ruleset/private.yaml
    interval: 86400

  telegramcidr:
    type: http
    behavior: ipcidr
    url: "https://cdn.jsdelivr.net/gh/Loyalsoldier/clash-rules@release/telegramcidr.txt"
    path: ./ruleset/telegramcidr.yaml
    interval: 86400

  cncidr:
    type: http
    behavior: ipcidr
    url: "https://cdn.jsdelivr.net/gh/Loyalsoldier/clash-rules@release/cncidr.txt"
    path: ./ruleset/cncidr.yaml
    interval: 86400

  lancidr:
    type: http
    behavior: ipcidr
    url: "https://cdn.jsdelivr.net/gh/Loyalsoldier/clash-rules@release/lancidr.txt"
    path: ./ruleset/lancidr.yaml
    interval: 86400

  applications:
    type: http
    behavior: classical
    url: "https://cdn.jsdelivr.net/gh/Loyalsoldier/clash-rules@release/applications.txt"
    path: ./ruleset/applications.yaml
    interval: 86400

rules:
  - RULE-SET,applications,DIRECT
  - PROCESS-NAME,BitComet_x64.exe,DIRECT
  - DOMAIN,clash.razord.top,DIRECT
  - DOMAIN,yacd.haishan.me,DIRECT
  - RULE-SET,private,DIRECT
  - RULE-SET,proxy,socks
  - RULE-SET,lancidr,DIRECT
  - RULE-SET,cncidr,DIRECT
  - RULE-SET,telegramcidr,socks
  - GEOIP,LAN,DIRECT
  - GEOIP,CN,DIRECT
  - MATCH,socks

# tun:
#   enable: true
#   stack: system # or gvisor
#   auto-route: true
#   auto-detect-interface: true
#   dns-hijack:
#     - 198.18.0.2:53