Torque does not seem to have any effect

[HerrTim]

Describe the issue

Hello,

I have two Landroid Worx in use: M600 and Vision M.
Torque settings work for the M600 without any problems, but for Vision M I can't change the standard 0.
The slider works, but the value is not set in the mower settings.

What version of Home Assistant Core has the issue?

core-2025.8.3

What was the last working version of Home Assistant Core?

No response

What version of the Landroid Cloud integration do you have installed

5.3.3

What type of installation are you running?

Home Assistant OS

Which make and model is the mower used for this integration?

Landroid Vision M, Version 1.2.35+1 - 3.37.0+31

Diagnostics information (NOT log entries!)

2025-08-30 17:16:11.235 DEBUG (SyncWorker_19) [custom_components.landroid_cloud.device_base] (Vision M, Set value) Setting number value for 'Torque' to -13.0
2025-08-30 17:16:11.236 DEBUG (SyncWorker_19) [pyworxcloud] Sending {"tq": -13.0} to Vision M
2025-08-30 17:16:11.236 DEBUG (SyncWorker_19) [pyworxcloud.MQTT] Publishing message '{'tq': -13.0}'
2025-08-30 17:16:11.236 DEBUG (SyncWorker_19) [pyworxcloud.MQTT] Formatting message '{'tq': -13.0}' to '{'id': 60563, 'uuid': 'xxx', 'tm': '2025-08-30T17:16:11Z', 'tq': -13.0}'
2025-08-30 17:16:12.376 DEBUG (paho-mqtt-client-WX/USER/833162/homeassistant/5712599b-29bf-4c2b-a929-8c84fb7be325) [pyworxcloud.MQTT] Received MQTT message:
{"cfg":{"id":60563,"lg":"de","tz":"Europe/Berlin","log":{"imp":1,"diag":1,"imp_t":[1],"diag_t":[0,2],"diag_v":17},"rd":180,"cmd":0,"tq":0,"al":{"lvl":1,"t":60},"sc":{"enabled":1,"paused":0,"slots":[{"d":0,"e":1,"s":660,"t":150,"cfg":{"cut":{"b":1,"z":[]}}},{"d":0,"e":1,"s":1065,"t":150,"cfg":{"cut":{"b":0,"z":[]}}},{"d":1,"e":1,"s":660,"t":150,"cfg":{"cut":{"b":0,"z":[]}}},{"d":1,"e":1,"s":1065,"t":150,"cfg":{"cut":{"b":0,"z":[]}}},{"d":2,"e":1,"s":660,"t":150,"cfg":{"cut":{"b":0,"z":[]}}},{"d":2,"e":1,"s":1065,"t":150,"cfg":{"cut":{"b":0,"z":[]}}},{"d":3,"e":1,"s":660,"t":150,"cfg":{"cut":{"b":1,"z":[]}}},{"d":3,"e":1,"s":1065,"t":150,"cfg":{"cut":{"b":0,"z":[]}}},{"d":4,"e":1,"s":660,"t":150,"cfg":{"cut":{"b":0,"z":[]}}},{"d":4,"e":1,"s":1065,"t":150,"cfg":{"cut":{"b":0,"z":[]}}},{"d":5,"e":1,"s":660,"t":150,"cfg":{"cut":{"b":0,"z":[]}}},{"d":5,"e":1,"s":1065,"t":150,"cfg":{"cut":{"b":0,"z":[]}}},{"d":6,"e":1,"s":660,"t":150,"cfg":{"cut":{"b":0,"z":[]}}},{"d":6,"e":1,"s":1065,"t":150,"cfg":{"cut":{"b":0,"z":[]}}}],"once":{"time":0,"cfg":{"cut":{"b":0,"z":[]}}}},"modules":{"DF":{"cut":1,"fh":0},"HL":{"enabled":0}},"cut":{"b":0,"z":[],"bd":0,"ob":0},"mz":{"p":[],"s":[{"id":1,"c":1,"cfg":{"cut":{"bd":150,"ob":0}}}]},"vis":{"slab":1}},"dat":{"uuid":"xxx","fw":"3.37.0+

Relevant log entries

none

Additional information

No response

[MTrab]

Landroid Cloud Refactoring – Request for Data Samples

I am currently preparing a refactoring of Landroid Cloud with the goal of resolving a number of long-standing issues and inconsistencies in the existing implementation. As part of this work, I need real-world data samples from live devices to validate behavior and edge cases.

Participation is entirely voluntary.

How to contribute

If you choose to help, please visit:

https://collect.trab.dk

There you can:

• Enter your credentials
• Select your mower brand
• Start a capture session

During the capture

While a capture is running, it is highly beneficial if you send a few commands to the mower, for example:

• Start
• Stop
• Party mode (or similar actions)

After a short period, please remember to stop the capture again.

Important notes

• Credentials are not stored on the server
• Credentials are used only for the active capture session
• No credentials are persisted after the capture ends

Any contributed data will help improve the quality and stability of the upcoming refactoring.