printer_mods

Mods

Printer mods for Voron 3D printers Remember to update this README when uploading new mod!

Legacy printers

Mods for legacy printers can be found here. If one of your mods applies to a current generation Voron printer, contact the admins in Discord to have your mod moved to this folder.

Table structure

Update the following table with the information about your mod:

• Your name
• A link to your sub-folder
• A short description of your mod
• The printer compatibility. Use :heavy_check_mark: for ✔️,:x: for ❌ and :grey_question: for ❔

like so: | Creator | [Mod title](link) | Description | :x: | :x: | :x: |

---

Creator	Mod title	Description	V0	V1.8	V2.4
aeresov	TL filament sensor bracket	A bracket for TL filament sensor to mount near stock spool holder.	❌	❔	✔️
arkeet	Dial test indicator mount	A toolhead mount for a dial test indicator, where the tip is located at the nozzle.	❌	✔️	✔️
Badnoob	Precision AB Drive	Changes the gearing for the AB drives to improve both resolution and torque, with a strenthened frame.	❔	❔	✔️
	Rail Alignment	Tools and procedure to properly align the rails in 2.4 and Afterburner	❌	❌	✔️
d3nny	Filtered Power Plug with RND_165-00057	Filtered Power Plug for RND 165-00057 and CAT6-Plug	❌	❌	✔️
Dan88	V0 one-part Skirts	One part Skirts for the V0	✔️	❌	❌
DorjeDorf	Duet 3 6HC Din Bracket	V2.4 Duet 3 6HC Din Bracket	❌	❌	✔️
	Duet 3 3HC Din Bracket	V2.4 Duet 3 3HC Din Bracket	❌	❌	✔️
DrGhetto	Ghetto Panels	Printed panels for the Voron Zero	✔️	❌	❌
eddie	V1.8 12mm Z Mod	Add V1.8 option for 12mm Z rods	❌	✔️	❌
edwardyeeks	Decontaminator Purge Bucket	Removeable purge bucket	❌	❌	✔️
	V2.4 Z Drive Motor Tensioner Mod	Braced motor tensioner for z drive	❌	❌	✔️
Ellis	15x15 Drag Chain Ends	15x15 drag chain end pieces	❔	❔	✔️
	Badge Retractor Mount	Extrusion mount for badge retractor to keep bowden tube out of the way.	❔	❔	✔️
	Short Z Joints	Shorter Z joints for the v2.4	❌	❌	✔️
FreeformFez	V1.8 Filtered Power Inlet	V1.6 Filtered Inlet and Rocker Switch for V1.8	❌	✔️	❌
GSL12	Pocketwatch Nema 17	Extruder like Pocketwatch, but with Nema17 instead of Nema14. Maybe for V0 fork with 2020 extrusions, Nema17 and MGN9 or other printers.	❔	❔	❔
hartk1213	Voron0_deck_panel_with_logo_and_VORON0	Used @Kruppes blank deck panel to add the logo as well as the name VORON0	✔️	❌	❌
	Voron0_display_dualcolor	Added a dual color file for the Voron Display Front housing	✔️	❌	❌
	Voron0_C14Inlet	Added a new Power inlet that uses a Fused C14 plug and switch that covers the mains contacts	✔️	❌	❌
hijax_pl_	Corner panel clip	V2 panel corner frames using 3-way L brackets in the corners	❌	❌	✔️
	Din Rail mount	Adapter to attach DIN Rail to 2020 extrusion.	❌	❌	✔️
	Controler Board adapters	DIN (rotated) and legacy adapters for boards like SKR mini E3.	❔	❌	✔️
jasonc	V2.4 Z-Idler Shoulder Bolt Mod	Modification to the idler carriers to accept a 25mm shoulder bolt. Ideal for Gates idlers.	❌	❌	✔️
Kruppes	V0 Printed Deck with inserts	Electronics Deck Panel using brass heat inserts. Optional with accent color Voron Logo.	✔️	❌	❌
Lord82	V0 c14 Back-Mount	V0 c14 Back-Mount with options (Deckpanel_rear/Back-Cover)	✔️	❌	❌
	V0 Resized Modified foot	V0 Resized Modified Foot 30mm & fit to skirt	✔️	❌	❌
madros	V0 OLED-skirt	V0 skirt with 0.96" OLED	✔️	❌	❌
MarcPot	UHP PSU Bracket Clip	DIN rail mount for the Mean Well UHP series PSU.	❔	❔	✔️
	Hour Counter Skirt + Keystone Skirt	Skirt mod for a mechanical hour counter and keystone inserts	❌	❌	✔️
mjoaris	10x11 Cable Chain Endcaps	Printable Endcaps for 10x11 Cable Chains	❌	✔️	✔️
	Mini12864 LCD Mount	Swiveling case for the Fysetc Mini12864 LCD	❌	❔	✔️
Mosher	Door hinges with M3 screws shafts	Simple mod of print in place door hinges, which uses m3 screws as shafts.	❌	❌	✔️
natewalck	V1.8 Jigs	Jigs for assembling V1.8	❌	✔️	❌
Nomsplease	60mm Shaft Jig	Simple jig for cutting and grinding 60mm Z shafts	❌	❌	✔️
	Duet Wifi Mount	Duet wifi mount in pocketwatch location	✔️	❌	❌
	LED Mounts	Basic LED mounts for 10 and 12mm strips	✔️	❌	❌
	Remixed Panel Mounts	Remixed rear bottom panel mounts with stop	✔️	❌	❌
	Pi Cam/ZeroW Mount	Mount for pi camera and ZeroW	✔️	❌	❌
	Pocket Watch Rear Reolcation Bracket	Pocket watch rear reolcation bracket	✔️	❌	❌
randell	Microswitch Pod for PCB	Modified endstop pod for use of endstop switches mounted on a PCB	❌	❌	✔️
raymondh	Large Spool Holders	Larger spool holders for KVP spools	❌	✔️	✔️
Rhastlyn	Wansview 1080p Camera Mount	A camera mount that replaces the OEM part to allow the camera to be mounted to a 2020 extrusion	❌	❔	✔️
	60mm Fan Cover	A easy to install cover for spec 60mm fans originally designed for a 2.4 build	❌	❔	✔️
Slidr	PanzerChain 2.4	Energychain for V2.4	❌	❌	✔️
StvPtrsn	Skirts for a 320mm Build	Skirts for a 320mm build	❌	❌	✔️
	Keystone Jack for Filtered Mains Panel	Add a keystone jack to your filtered mains plug panel	❌	❌	✔️
	Side Fan Support, No Tape	Mount the 60mm side fans and inserts without tape	❌	❌	✔️
tameike	Din Rail SKR 90 deg	SKR V1.3 bracket turned 90 degrees	❌	❔	✔️
	Din Rail 2020 Holder	Attaching DIN Rails to 2020	❌	❔	✔️
	TacoRaven Mounting Frame	TR V0 mount	✔️	❌	❌
	Jetpack V0 base	Attach Jetpack to V0 frame	✔️	❌	❌
warriorofwire	Slenderfan for Afterburner	Lighter, quieter, smaller Afterburner	❌	❌	✔️
xbst_	PCB LED Holder	Very simple mount for some (?) PCB LED Bars	❌	✔️	✔️
	DIN Mount Omron Relay	A simple DIN rail mount for the BOM Relay	❌	✔️	✔️
	DIN Mount Pi 4x Relay Board	A simple DIN rail mount for the 4 channel relay board for Raspberry Pi	❌	✔️	✔️
	DIN Mount Max31865	A simple DIN rail mount for the Adafruit (or SAME SIZE clone) MAX31865 PT100 Board.	❌	✔️	✔️
	Car Hood Style Bed Hinge	A way of reaching electronics from the top by having a "car hood" style hing for the heatbed, and rotated electronics mounts.	❌	❌	✔️

---