[Feature] Could it be possible to control the hardware directly

[shreyasajj]

So I absolutely love how you designed this and how much though went into it. But as it already connected to home assistant, I would love it if I could send commands through home assistant rather than changing the ron file . Would it be possible to expose some endpoints or mqtt listener that allow me on a whim:

• Turn on and off the vibration
• Turn the temperature of one side of the bed or both to a specific temperature whenever I want

Thank you so much. I working on adding this myself but it taking a while since I dont know rust that well :)

I just want home assistant to be the brains of the operation because it much more user friendly

[LiamSnow]

Super valid point.

I'm thinking something like this:

(
    timezone: "America/New_York",

    led: (
        // SlowBreath(r, g, b)
        // FastBreath(r, g, b)
        // Off
        // Fixed(r, g, b)
        // FastRainbowBreath
        // SlowRainbowBreath
        //  .. see more in `src/led/patterns.rs`
        idle: Fixed(0, 255, 0),
        active: SlowBreath(255, 0, 0),      

        // One: 0mA\~10mA, Imax=10mA
        // Two: 0mA\~20mA, Imax=20mA
        // Three: 0mA\~30mA, Imax=30mA
        // Four: 0mA\~40mA, Imax=40mA
        band: Three,
    ),

    mqtt: (
        server: "homeassistant.local",
        port: 1883,
        user: "example",
        password: "1234"       
    ),

    profile: None,
)

Where this just puts the bed into a manual control mode. Then in this mode it can just receive temperatures to set to via MQTT.

Does that seem reasonable?

[shreyasajj]

Yeah but im think we dont want another eight sleep outage that result in the failure to control the device.
Maybe we can have default values set in the profile and that if it cant connect to mqtt or home assistant(maybe a health check via http) then we go back to the default values in the profile?