Pulsu(m) Plantae board components

[gilfuser]

Hi there.
I hope there still someone out there looking this.
I'm doing a board following your steps. First in the breadboard to see how it works and if I'm able do it anyway.
I'm unsure about the components.
I would like to ask you if there is a picture of the board where I could identify the components. Specially the 1.5 pins, power and salida.

Thank in advance.

bests,
Gil

[b01xy]

maybe here : https://i2.wp.com/farm9.staticflickr.com/8524/8670196247_da17ccacaa_k_d.jpg?resize=1000%2C562&ssl=1 + webpage http://interspecifics.cc/work/pulsum-plantae-2012/

[unicornrobot]

I found this to help me with board components - https://slideplayer.org/slide/6133925/

[antoine3000]

Hi @gilfuser @b01xy @unicornrobot,

Have you found a component list, or a easier way to prototype this board?

Thank you,
Antoine

[Hf316]

hi @antoinestudio
did you ever figure this out? Thanks

[antoine3000]

Hello @Hf316,

Unfortunately not entirely. But in the meantime, I made a prototype/project using more or less the same approach. I documented it on my website > https://antoine.studio/green-observatory.html

[gilfuser]

Beautiful stuff, @antoine3000

[YoruTen]

I'm trying to find trimpots that would work with the boards presented in the github. If I have figured it out somewhat correctly they have a pitch of 3.5 mm, but I can't find any component with the corresponding pitch.

[Lessnullvoid]

I'm trying to find trimpots that would work with the boards presented in the github. If I have figured it out somewhat correctly they have a pitch of 3.5 mm, but I can't find any component with the corresponding pitch.

you can see the trimpots on the these image: https://flic.kr/p/eda2hc