Fractional gridfinity support

[TK0130]

Feature request: Support for fractional gridfinity to allow for filling some smaller or odd spaces:

https://www.printables.com/model/616289-fractional-gridfinity

[JasonRS1969]

I'd also like too add a vote this feature request.
It would be incredibly useful.

Thanks.

[therick0996]

does setting the grid to 21mm, and then "doubling" the units not work? at least for halvsies

a 1.5x4 would be 3x8

[JasonRS1969]

I did have this thought just after posting above.

For the bins, yes it seems to and I'm just printing out a test bin as I type to confirm it fits.

It's a bit more challenging for the base though and this is where it would be handy to have it in the generator. At the moment you could make single strips that were 21 x 42, but not a larger grid e.g. 5 x 5, that has one strip 21mm wide.

(edited to add) If you do a large baseplate with 21 x 21 spacing (e.g. 10 x 10) you would not be able to use bins with the standard base size.

To be able to have the generator add a 21mm wide series of cells (similar to adding padding) would help maximise usable space in a drawer.

[JasonRS1969]

Confirmed: Setting the base width and length to 21mm for the bins allows for 1/2 spacing in bin creation. Works nicely, and gives a lot of flexibility.

Baseplates: this is where the enhancement would be beneficial. If we could have a padding option that allows us to add a padding row / column with either length or width to 21mm that would be very helpful in maximising the use of drawer space.