connectAP goes wrong

[doditsuprianto]

i try to use connectAP (wifi looping connection) but the wifi does not work.
But if i remove the connectAP the wifi works.

i think the reset did not work well.

`/*
*

• Server side for Simple Connection (Always Connected)

*/

include <ESP8266_TCP.h>

include <SoftwareSerial.h>

SoftwareSerial SerialESP(2,3);

// ESP8266 Class
ESP8266_TCP wifi;

// Target Access Point

define ssid "SSID"

define pass "kasihtauaja"

// Connect this pin to CH_PD pin on ESP8266

define PIN_RESET 6

void setup()
{
delay(3000);

// We use Serial1 to interface with ESP8266
// and use Serial to debugging
Serial.begin(9600);
SerialESP.begin(9600);
wifi.begin(&SerialESP, &Serial, PIN_RESET);

/* If your board has only 1 serial port

• or you didn't need to debugging, try this.
  *

• Serial.begin(115200);

• wifi.begin(&Serial, PIN_RESET);
  *
  */

  // Check that ESP8266 is available
  if(wifi.test())
  {
  // Connect to target Access Point
  String ip = connectAP();

  // but if remark this the wifi works, somethig like this
  // //String ip = connectAP();
  // so the reset did not work, maybe they use the old configuration

  // Open TCP Server on port 2000 and 30 seconds for connection timeout (Max 2880)
  

  wifi.openTCPServer(2000, 7200);
  }
  else
  {
  // ESP8266 isn't available
  Serial.println("Check module connection and restart to try again...");
  while(true);
  }
  }

void loop()
{
// Check for any data has coming to ESP8266
int dataState = wifi.isNewDataComing(WIFI_SERVER);
if(dataState != WIFI_NEW_NONE)
{
if(dataState == WIFI_NEW_CONNECTED)
{
// Connected with TCP Client Side
Serial.println("Status : Connected");
}
else if(dataState == WIFI_NEW_DISCONNECTED)
{
// Disconnected from TCP Client Side
Serial.println("Status : Disconnected");
}
else if(dataState == WIFI_NEW_MESSAGE)
{
// Got a message from TCP Client Side
Serial.println("ID : " + String(wifi.getId()));
Serial.println("Message : " + wifi.getMessage());
}
else if(dataState == WIFI_NEW_SEND_OK)
{
// Message transfer has successful
Serial.println("SENT!!!!");
}
}
}

// Access Point Connection Function that you can loop connect to Access Point until successful
String connectAP()
{
String ip = "0.0.0.0";
while(ip.equals("0.0.0.0"))
{
ip = wifi.connectAccessPoint(ssid, pass);
if(!ip.equals("0.0.0.0"))
{
break;
}
}
return ip;
}
`
anyone can help me?
regards