Problems installing PyHEAAN

[CarlosMoralesSal]

Hello,

I am trying to follow all steps to install PyHEAAN. when I am installing the ntl . I have this error after run the makefile:

GMP version check (6.2.0/6.1.2)
*** version number mismatch: inconsistency between gmp.h and libgmp . How can I solve this?. I would love to work with PyHEAAN but it is so difficult because there is no step by step clear. Could you help with this?. Thanks

[Huelse]

For your error, just go to download, choose correct [version 6.1.2] (https://gmplib.org/download/gmp/gmp-6.1.2.tar.lz) and compile.
We need to build a shared lib, then the python interpreter can find it.
main steps:

1. build a Shared NTL lib, which you need to change the NTL's source src/DoConfig line 10 'Shared' to on and change the path in setup.py line 19 to it. The latest NTL lib(11.4.3) need GMP and gf2x, so just refer to this

2. Add -fPIC in HEAAN/HEAAN/lib/src/subdir.mk line 59, and build the HEAAN lib.

3. in /src run python3 setup.py build_ext -i build the PyHEAAN.

I admitted that's a little complicated, I will improve it later.

[CarlosMoralesSal]

Thanks for your clarification @Huelse , I love your repository.

[CarlosMoralesSal]

@Huelse , the problem with the installation continues. When I am on the lasts steps I have this error, when I do the make or setup:
CMake Error at /home/hermes/Escritorio/PYHEAAN/pybind11/build/pybind11Config.cmake:100 (include):
include could not find load file:

pybind11Tools

Call Stack (most recent call first):
CMakeLists.txt:15 (find_package)

CMake Error at /home/hermes/Escritorio/PYHEAAN/pybind11/build/pybind11Config.cmake:108 (include):
include could not find load file:

/home/hermes/Escritorio/PYHEAAN/pybind11/build/pybind11Targets.cmake

Call Stack (most recent call first):
CMakeLists.txt:15 (find_package)

CMake Error at /home/hermes/Escritorio/PYHEAAN/pybind11/build/pybind11Config.cmake:110 (find_package):
No "FindPythonLibsNew.cmake" found in CMAKE_MODULE_PATH.
Call Stack (most recent call first):
CMakeLists.txt:15 (find_package)

CMake Warning (dev) at /home/hermes/Escritorio/PYHEAAN/pybind11/build/pybind11Config.cmake:110 (find_package):
FindPythonLibsNew.cmake must either be part of this project itself, in this
case adjust CMAKE_MODULE_PATH so that it points to the correct location
inside its source tree.

Or it must be installed by a package which has already been found via
find_package(). In this case make sure that package has indeed been found
and adjust CMAKE_MODULE_PATH to contain the location where that package has
installed FindPythonLibsNew.cmake. This must be a location provided by
that package. This error in general means that the buildsystem of this
project is relying on a Find-module without ensuring that it is actually
available.

Call Stack (most recent call first):
CMakeLists.txt:15 (find_package)
This warning is for project developers. Use -Wno-dev to suppress it.

-- Configuring incomplete, errors occurred!
See also "/home/hermes/Escritorio/PYHEAAN/src/CMakeFiles/CMakeOutput.log".

I have follow everything, even I have run this command: cmake -Dpybind11_DIR=/home/hermes/Escritorio/PYHEAAN/pybind11/build .
and nothing.

[Huelse]

Have you run pip3 install pybind11? if not, try to install it.
sometimes the find_package may not work well, you could try to build and install the latest CMake.
or use add_subdirectory instead of find_package.

[CarlosMoralesSal]

Nope, it doesn't work with pip3 install, I will try with conda as well.

[Huelse]

How about trying to run python install setup.py in the pybind11 folder?

[CarlosMoralesSal]

Nothing
hermes@hermes-VirtualBox:~/Escritorio/PYHEAAN/pybind11$ python3 install setup.py
python3: can't open file 'install': [Errno 2] No such file or directory
I am using as well python3.7 by the way

[Huelse]

My bad, the order is wrong, python3 setup.py install or download a new pybind11

[CarlosMoralesSal]

After doing that and run again the cmake . , I have this:
hermes@hermes-VirtualBox:~/Escritorio/PYHEAAN/src$ cmake -Dpybind11_DIR=/home/hermes/Escritorio/PYHEAAN/pybind11/build .
CMake Error at /home/hermes/Escritorio/PYHEAAN/pybind11/build/pybind11Config.cmake:100 (include):
include could not find load file:

pybind11Tools

Call Stack (most recent call first):
CMakeLists.txt:15 (find_package)

CMake Error at /home/hermes/Escritorio/PYHEAAN/pybind11/build/pybind11Config.cmake:108 (include):
include could not find load file:

/home/hermes/Escritorio/PYHEAAN/pybind11/build/pybind11Targets.cmake

Call Stack (most recent call first):
CMakeLists.txt:15 (find_package)

CMake Error at /home/hermes/Escritorio/PYHEAAN/pybind11/build/pybind11Config.cmake:110 (find_package):
No "FindPythonLibsNew.cmake" found in CMAKE_MODULE_PATH.
Call Stack (most recent call first):
CMakeLists.txt:15 (find_package)

CMake Warning (dev) at /home/hermes/Escritorio/PYHEAAN/pybind11/build/pybind11Config.cmake:110 (find_package):
FindPythonLibsNew.cmake must either be part of this project itself, in this
case adjust CMAKE_MODULE_PATH so that it points to the correct location
inside its source tree.

Or it must be installed by a package which has already been found via
find_package(). In this case make sure that package has indeed been found
and adjust CMAKE_MODULE_PATH to contain the location where that package has
installed FindPythonLibsNew.cmake. This must be a location provided by
that package. This error in general means that the buildsystem of this
project is relying on a Find-module without ensuring that it is actually
available.

Call Stack (most recent call first):
CMakeLists.txt:15 (find_package)
This warning is for project developers. Use -Wno-dev to suppress it.

-- Configuring incomplete, errors occurred!
See also "/home/hermes/Escritorio/PYHEAAN/src/CMakeFiles/CMakeOutput.log".

[Huelse]

What's your cmake's version?

[CarlosMoralesSal]

cmake version 3.13.4

[CarlosMoralesSal]

Now I have this:
rmes/Escritorio/pybind11-2.4.3/build/mock_install/share/cmake/pybind11
CMake Warning:
No source or binary directory provided. Both will be assumed to be the
same as the current working directory, but note that this warning will
become a fatal error in future CMake releases.

-- Found PythonInterp: /usr/bin/python3.7 (found version "3.7.5")
-- Found PythonLibs: /usr/lib/x86_64-linux-gnu/libpython3.7m.so
-- Performing Test HAS_FLTO
-- Performing Test HAS_FLTO - Success
-- LTO enabled
-- Configuring done
-- Generating done
-- Build files have been written to: /home/hermes/Escritorio/PYHEAAN/src

And when I run the test.py with python3 test.py
Traceback (most recent call last):
File "test.py", line 1, in
from HEAAN import *
ModuleNotFoundError: No module named 'HEAAN'

[Huelse]

if you create a build folder, the HEAAN..so is in it. just move it out.

python3 setup.py install can be global use.

[CarlosMoralesSal]

running install
running build
running build_ext
building 'HEAAN' extension
x86_64-linux-gnu-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/python3.7 -I../pybind11/include -I/usr/local/include -I../HEAAN/src -I/usr/include/python3.7m -c wrapper.cpp -o build/temp.linux-x86_64-3.7/wrapper.o -std=c++11
wrapper.cpp:9:10: fatal error: HEAAN.h: No existe el archivo o el directorio
9 | #include "HEAAN.h"
| ^~~~~~~~~
compilation terminated.
error: command 'x86_64-linux-gnu-gcc' failed with exit status 1

[Huelse]

Change the path of HEAAN, in setup.py line 16, '../HEAAN/src' to '../HEAAN/HEAAN/src' and line 19 '../HEAAN/lib/libHEAAN.a' to '../HEAAN/HEAAN/lib/libHEAAN.a'
I will fix it later.