From ad87c5cca872ce597d1fa80f0ba5f08c3f386f22 Mon Sep 17 00:00:00 2001 From: YWtheGod Date: Tue, 13 Jan 2026 17:39:17 +0800 Subject: [PATCH] =?UTF-8?q?=E6=88=91=E5=86=99=E4=BA=86=E4=B8=80=E4=BB=BD?= =?UTF-8?q?=E3=80=8A3D=E6=89=93=E5=8D=B0=E8=B0=83=E5=B9=B3=E6=9E=81?= =?UTF-8?q?=E7=AE=80=E6=94=BB=E7=95=A5=E3=80=8B=EF=BC=8C=E8=A7=A3=E5=86=B3?= =?UTF-8?q?=E4=BA=86=E2=80=9C=E6=96=B0=E6=89=8B=E5=B8=B8=E9=81=87=E5=88=B0?= =?UTF-8?q?=E7=9A=845=E4=B8=AA=E9=97=AE=E9=A2=98=EF=BC=8C=E8=AF=B7?= =?UTF-8?q?=E6=9F=A5=E6=94=B6=EF=BC=8C=E6=9C=9F=E5=BE=85=E5=90=88=E5=B9=B6?= =?UTF-8?q?=E5=88=B0=E5=8E=9F=E4=BB=93=E5=BA=93=E3=80=82?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 这是我第一次作出贡献，很不容易的首次最小尝试，期待点赞支持，作者是音符，后续可能在其他名为音符的账号上继续提交贡献文档，给我在这个方向发展的动力吧，请求合并至原仓库 This is my first contribution. It was a very difficult and initial attempt. I look forward to receiving likes and support. The author is "Note". I may continue to submit contribution documents on other accounts named "Note" in the future. Please give me the motivation to develop in this direction. Request to merge into the original repository. --- README.md | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-) diff --git a/README.md b/README.md index c66cbe5..4331996 100644 --- a/README.md +++ b/README.md @@ -2,9 +2,33 @@ ## About -This script intended for use on Creality **K1 Series** and **Ender-3 V3 Series** printers allows to add more features. -If you don't know what you're doing, I don't recommend following this guide. + This script intended for use on Creality **K1 Series** and **Ender-3 V3 Series** printers allows to add more features. + + Must-Read Before Use: Minimalist Guide to Leveling Ender-3/K1 Series (5 Steps to Solve the “Poor Bed Adhesion” Issue) + +(Note: Leveling is a prerequisite for optimizing prints with scripts; improper leveling may cause model warping or detachment.) + +###Step 1: Place A4 Paper + +Place an A4 paper between the print bed and the nozzle (heat the nozzle to 180°C). + +###Step 2: Adjust Screws + +Use the leveling screws to adjust the bed height until “pulling the A4 paper has slight resistance” (like the force of “gliding over skin”). + +###Step 3: Test 4 Corners + center + +Repeat adjusting the bed’s 4 corners and center to ensure “consistent resistance at each point.” + +###Step 4: Print Test Model + +Print a “10mm cube” (slice with Cura, layer height 0.2mm) and check if the “bottom surface is flat.” + +###Step 5: Fine-Tune (If Warping Occurs) + +If the bottom surface warps, increase the “bed temperature” from 50°C to 60°C (for PLA material). + ## Wiki