diff --git a/files/camera-settings/camera-settings.cfg b/files/camera-settings/camera-settings.cfg
index 2c05662..d8d30ca 100644
--- a/files/camera-settings/camera-settings.cfg
+++ b/files/camera-settings/camera-settings.cfg
@@ -5,6 +5,7 @@
 [delayed_gcode LOAD_CAM_SETTINGS]
 initial_duration: 2
 gcode:
+  CAM_SELECT CAM_DEVICE=4
   CAM_BRIGHTNESS BRIGHTNESS=0
   CAM_CONTRAST CONTRAST=32
   CAM_SATURATION SATURATION=56
@@ -17,7 +18,9 @@ gcode:
   CAM_BACKLIGHT_COMPENSATION BACKLIGHT_COMPENSATION=1
   CAM_EXPOSURE_AUTO EXPOSURE_AUTO=3
   CAM_EXPOSURE_AUTO_PRIORITY EXPOSURE_AUTO_PRIORITY=0
-
+  CAM_EXPOSURE_ABSOLUTE EXPOSURE_ABSOLUTE=1000
+  CAM_FOCUS_AUTO FOCUS_AUTO=0
+  CAM_FOCUS_ABSOLUTE FOCUS_ABSOLUTE=127
 
 [gcode_shell_command v4l2-ctl]
 command: v4l2-ctl
@@ -27,82 +30,124 @@ verbose: True
 [gcode_macro CAM_SETTINGS]
 description: Show current camera settings
 gcode:
-    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="-d /dev/video4 -l"
+    {% set param = "-d /dev/video%s -l" % (printer["gcode_macro CAM_SELECT"].cam_device)  %}
+    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="""{param}""" 
 
 [gcode_macro CAM_BRIGHTNESS]
 description: min=-64 / max=64
 gcode:
     {% set brightness = params.BRIGHTNESS|default(0) %}
-    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="-d /dev/video4 --set-ctrl brightness="{brightness}
+    {% set param = "-d /dev/video%s --set-ctrl brightness=%s" % (printer["gcode_macro CAM_SELECT"].cam_device, brightness)  %}
+    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="""{param}""" 
 
 [gcode_macro CAM_CONTRAST]
 description: min=0 / max=64
 gcode:
     {% set contrast = params.CONTRAST|default(32) %}
-    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="-d /dev/video4 --set-ctrl contrast="{contrast}
+    {% set param = "-d /dev/video%s --set-ctrl contrast=%s" % (printer["gcode_macro CAM_SELECT"].cam_device, contrast)  %}
+    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="""{param}""" 
 
 [gcode_macro CAM_SATURATION]
 description: min=0 / max=128
 gcode:
     {% set saturation = params.SATURATION|default(56) %}
-    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="-d /dev/video4 --set-ctrl saturation="{saturation}
+    {% set param = "-d /dev/video%s --set-ctrl saturation=%s" % (printer["gcode_macro CAM_SELECT"].cam_device, saturation)  %}
+    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="""{param}""" 
 
 [gcode_macro CAM_HUE]
 description: min=-40 / max=40
 gcode:
     {% set hue = params.HUE|default(0) %}
-    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="-d /dev/video4 --set-ctrl hue="{hue}
+    {% set param = "-d /dev/video%s --set-ctrl hue=%s" % (printer["gcode_macro CAM_SELECT"].cam_device, hue)  %}
+    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="""{param}""" 
 
 [gcode_macro CAM_WHITE_BALANCE_TEMPERATURE_AUTO]
 description: disable=0 / enable=1
 gcode:
     {% set white_balance_temperature_auto = params.WHITE_BALANCE_TEMPERATURE_AUTO|default(1) %}
-    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="-d /dev/video4 --set-ctrl white_balance_temperature_auto="{white_balance_temperature_auto}
+    {% set param = "-d /dev/video%s --set-ctrl white_balance_temperature_auto=%s" % (printer["gcode_macro CAM_SELECT"].cam_device, white_balance_temperature_auto)  %}
+    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="""{param}""" 
 
 [gcode_macro CAM_GAMMA]
 description: min=72 / max=500
 gcode:
     {% set gamma = params.GAMMA|default(80) %}
-    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="-d /dev/video4 --set-ctrl gamma="{gamma}
+    {% set param = "-d /dev/video%s --set-ctrl gamma=%s" % (printer["gcode_macro CAM_SELECT"].cam_device, gamma)  %}
+    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="""{param}""" 
 
 [gcode_macro CAM_GAIN]
 description: min=0 / max=100
 gcode:
     {% set gain = params.GAIN|default(0) %}
-    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="-d /dev/video4 --set-ctrl gain="{gain}
+    {% set param = "-d /dev/video%s --set-ctrl gain=%s" % (printer["gcode_macro CAM_SELECT"].cam_device, gain)  %}
+    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="""{param}""" 
 
 [gcode_macro CAM_POWER_LINE_FREQUENCY]
 description: min=0 / max=2
 gcode:
     {% set power_line_frequency = params.POWER_LINE_FREQUENCY|default(1) %}
-    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="-d /dev/video4 --set-ctrl power_line_frequency="{power_line_frequency}
+    {% set param = "-d /dev/video%s --set-ctrl power_line_frequency=%s" % (printer["gcode_macro CAM_SELECT"].cam_device, power_line_frequency)  %}
+    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="""{param}""" 
 
 [gcode_macro CAM_WHITE_BALANCE_TEMPERATURE]
 description: min=2800 / max=6500
 gcode:
     {% set white_balance_temperature = params.WHITE_BALANCE_TEMPERATURE|default(4600) %}
-    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="-d /dev/video4 --set-ctrl white_balance_temperature="{white_balance_temperature}
+    {% set param = "-d /dev/video%s --set-ctrl white_balance_temperature=%s" % (printer["gcode_macro CAM_SELECT"].cam_device, white_balance_temperature)  %}
+    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="""{param}""" 
 
 [gcode_macro CAM_SHARPNESS]
 description: min=0 / max=6
 gcode:
     {% set sharpness = params.SHARPNESS|default(3) %}
-    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="-d /dev/video4 --set-ctrl sharpness="{sharpness}
+    {% set param = "-d /dev/video%s --set-ctrl sharpness=%s" % (printer["gcode_macro CAM_SELECT"].cam_device, sharpness)  %}
+    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="""{param}""" 
 
 [gcode_macro CAM_BACKLIGHT_COMPENSATION]
 description: min=0 / max=2
 gcode:
     {% set backlight_compensation = params.BACKLIGHT_COMPENSATION|default(1) %}
-    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="-d /dev/video4 --set-ctrl backlight_compensation="{backlight_compensation}
+    {% set param = "-d /dev/video%s --set-ctrl backlight_compensation=%s" % (printer["gcode_macro CAM_SELECT"].cam_device, backlight_compensation)  %}
+    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="""{param}""" 
     
 [gcode_macro CAM_EXPOSURE_AUTO]
 description: manual=1 / auto=3
 gcode:
     {% set exposure_auto = params.EXPOSURE_AUTO|default(3) %}
-    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="-d /dev/video4 --set-ctrl exposure_auto="{exposure_auto}
+    {% set param = "-d /dev/video%s --set-ctrl exposure_auto=%s" % (printer["gcode_macro CAM_SELECT"].cam_device, exposure_auto)  %}
+    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="""{param}""" 
 
 [gcode_macro CAM_EXPOSURE_AUTO_PRIORITY]
 description: disable=0 / enable=1
 gcode:
     {% set exposure_auto_priority = params.EXPOSURE_AUTO_PRIORITY|default(0) %}
-    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="-d /dev/video4 --set-ctrl exposure_auto_priority="{exposure_auto_priority}
+    {% set param = "-d /dev/video%s --set-ctrl exposure_auto_priority=%s" % (printer["gcode_macro CAM_SELECT"].cam_device, exposure_auto_priority)  %}
+    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="""{param}""" 
+    
+[gcode_macro CAM_EXPOSURE_ABSOLUTE]
+description: min=3 / max=2047
+gcode:
+    {% set exposure_absolute = params.EXPOSURE_ABSOLUTE|default(3) %}
+    {% set param = "-d /dev/video%s --set-ctrl exposure_absolute=%s" % (printer["gcode_macro CAM_SELECT"].cam_device, exposure_absolute)  %}
+    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="""{param}""" 
+
+[gcode_macro CAM_FOCUS_AUTO]
+description: disable=0 / enable=1
+gcode:
+    {% set focus_auto = params.FOCUS_AUTO|default(0) %}
+    {% set param = "-d /dev/video%s --set-ctrl focus_auto=%s" % (printer["gcode_macro CAM_SELECT"].cam_device, focus_auto)  %}
+    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="""{param}""" 
+    
+[gcode_macro CAM_FOCUS_ABSOLUTE]
+description: min=0 / max=250
+gcode:
+    {% set focus_absolute = params.FOCUS_ABSOLUTE|default(127) %}
+    {% set param = "-d /dev/video%s --set-ctrl focus_absolute=%s" % (printer["gcode_macro CAM_SELECT"].cam_device, focus_absolute)  %}
+    RUN_SHELL_COMMAND CMD=v4l2-ctl PARAMS="""{param}""" 
+        
+[gcode_macro CAM_SELECT]
+description: device=/dev/video(4|5)
+variable_cam_device: 4
+gcode:
+    SET_GCODE_VARIABLE MACRO=CAM_SELECT VARIABLE=cam_device VALUE={params.CAM_DEVICE|default(cam_device)}
+    
\ No newline at end of file
diff --git a/files/services/S50usb_camera-dual b/files/services/S50usb_camera-dual.bak
similarity index 70%
rename from files/services/S50usb_camera-dual
rename to files/services/S50usb_camera-dual.bak
index b3bc1c2..fc83fee 100755
--- a/files/services/S50usb_camera-dual
+++ b/files/services/S50usb_camera-dual.bak
@@ -5,13 +5,13 @@
 case "$1" in
   start)
     echo "Starting USB Camera..."
-    V4L_DEVS=$(v4l2-ctl --list-devices | grep -A1 usb | sed 's/^[[:space:]]*//g' | grep '^/dev')
-    CREALITY_CAMS=$(v4l2-ctl --list-devices | grep -E 'CREALITY' | wc -l)
+    V4L_DEVS=$(v4l2-ctl --list-devices | grep -vE 'CCX2F3298|CCX2F3299' | grep -A1 usb | sed 's/^[[:space:]]*//g' | grep '^/dev')
+    CREALITY_CAMS=$(v4l2-ctl --list-devices | grep -E 'CREALITY|CCX2F3298|CCX2F3298' | wc -l)
     if [ "x$V4L_DEVS" = "x" -o $CREALITY_CAMS -gt 0 ]; then
-      /opt/bin/mjpg_streamer -b -i "/opt/lib/mjpg-streamer/input_uvc.so -d /dev/video4 -r 1280x720 -f 15" -o "/opt/lib/mjpg-streamer/output_http.so -p 8080"
+      /opt/bin/mjpg_streamer -b -i "/opt/lib/mjpg-streamer/input_uvc.so -d /dev/video5 -r 1280x720 -f 15" -o "/opt/lib/mjpg-streamer/output_http.so -p 8080"
       /opt/bin/mjpg_streamer -b -i "/opt/lib/mjpg-streamer/input_uvc.so -d /dev/video6 -r 1280x720 -f 15" -o "/opt/lib/mjpg-streamer/output_http.so -p 8081"
     else
-      /opt/bin/mjpg_streamer -b -i "/opt/lib/mjpg-streamer/input_uvc.so -d /dev/video4 -r 1280x720 -f 15" -o "/opt/lib/mjpg-streamer/output_http.so -p 8080"
+      /opt/bin/mjpg_streamer -b -i "/opt/lib/mjpg-streamer/input_uvc.so -d /dev/video5 -r 1280x720 -f 15" -o "/opt/lib/mjpg-streamer/output_http.so -p 8080"
     fi
     ;;
   stop)
diff --git a/files/services/S50usb_camera-multi b/files/services/S50usb_camera-multi
new file mode 100755
index 0000000..66cf33e
--- /dev/null
+++ b/files/services/S50usb_camera-multi
@@ -0,0 +1,40 @@
+#!/bin/sh
+# USB Camera Service
+# Credit: destinal & Guilouz
+
+case "$1" in
+  start)
+    echo "Starting USB Camera..."
+    V4L_DEVS=$(v4l2-ctl --list-devices | grep -vE 'CCX2F3298|CCX2F3299' | grep -A1 usb | sed 's/^[[:space:]]*//g' | grep '^/dev')
+    #CREALITY_CAMS=$(v4l2-ctl --list-devices | grep -A1 'CREALITY|CCX2F3298|CCX2F3299' | grep -v 'CREALITY|CCX2F3298|CCX2F3299' | wc -l)
+    CREALITY_CAMS=$(v4l2-ctl --list-devices | grep -EA1 --no-group-separator 'CREALITY|CCX2F3298|CCX2F3299' | grep -vE 'CREALITY|CCX2F3298|CCX2F3299' | cut -d '
+' -f 2)
+    PORT=8080
+    if [ "x$CREALITY_CAMS" != x ]; then
+      echo /opt/bin/mjpg_streamer -b -i "/opt/lib/mjpg-streamer/input_uvc.so -d $CREALITY_CAMS -r 1280x720 -f 15" -o "/opt/lib/mjpg-streamer/output_http.so -p $PORT"
+      /opt/bin/mjpg_streamer -b -i "/opt/lib/mjpg-streamer/input_uvc.so -d $CREALITY_CAMS -r 1280x720 -f 15" -o "/opt/lib/mjpg-streamer/output_http.so -p $PORT"
+      PORT=`expr $PORT + 1` 
+      #echo "Error: No third party camera found or you use a Creality camera!"
+      #exit 1
+    fi
+    for V4L_DEV in $V4L_DEVS; do
+      echo /opt/bin/mjpg_streamer -b -i "/opt/lib/mjpg-streamer/input_uvc.so -d $V4L_DEV -r 1280x720 -f 15" -o "/opt/lib/mjpg-streamer/output_http.so -p $PORT"
+      /opt/bin/mjpg_streamer -b -i "/opt/lib/mjpg-streamer/input_uvc.so -d $V4L_DEV -r 1280x720 -f 15" -o "/opt/lib/mjpg-streamer/output_http.so -p $PORT"
+      PORT=`expr $PORT + 1` 
+    done
+    ;;
+  stop)
+    echo "Stopping USB Camera..."
+    killall -q mjpg_streamer && killall -q cam_app && killall -q cx_ai_middleware
+    ;;
+  restart|reload)
+    "$0" stop
+    sleep 1
+    "$0" start
+    ;;
+  *)
+    echo "Usage: /etc/init.d/S50usb_camera {start|stop|restart}"
+    exit 1
+esac
+
+exit $?
diff --git a/files/services/S50usb_camera-single b/files/services/S50usb_camera-single
index ff7e827..198adb0 100755
--- a/files/services/S50usb_camera-single
+++ b/files/services/S50usb_camera-single
@@ -5,12 +5,12 @@
 case "$1" in
   start)
     echo "Starting USB Camera..."
-    V4L_DEVS=$(v4l2-ctl --list-devices | grep -A1 usb | sed 's/^[[:space:]]*//g' | grep '^/dev')
-    CREALITY_CAMS=$(v4l2-ctl --list-devices | grep -E 'CREALITY|CCX2F3298' | wc -l)
-    if [ "x$V4L_DEVS" = "x" -o $CREALITY_CAMS -gt 0 ]; then
-      echo "Error: No third party camera found or you use a Creality camera!"
-      exit 1
-    fi
+    V4L_DEVS=$(v4l2-ctl --list-devices | grep -vE 'CCX2F3298|CCX2F3299' | grep -A1 usb | sed 's/^[[:space:]]*//g' | grep '^/dev')
+    CREALITY_CAMS=$(v4l2-ctl --list-devices | grep -E 'CREALITY|CCX2F3298|CCX2F3299' | wc -l)
+#    if [ "x$V4L_DEVS" = "x" -o $CREALITY_CAMS -gt 0 ]; then
+#      echo "Error: No third party camera found or you use a Creality camera!"
+#      exit 1
+#    fi
     PORT=8080
     for V4L_DEV in $V4L_DEVS; do
       /opt/bin/mjpg_streamer -b -i "/opt/lib/mjpg-streamer/input_uvc.so -d $V4L_DEV -r 1280x720 -f 15" -o "/opt/lib/mjpg-streamer/output_http.so -p $PORT"
diff --git a/scripts/menu/K1/install_menu_K1.sh b/scripts/menu/K1/install_menu_K1.sh
index 484ef35..3c30534 100755
--- a/scripts/menu/K1/install_menu_K1.sh
+++ b/scripts/menu/K1/install_menu_K1.sh
@@ -174,12 +174,25 @@ function install_menu_k1() {
       17)
         if [ -f "$CAMERA_SETTINGS_FILE" ]; then
           error_msg "Camera Settings Control is already installed!"
-        elif v4l2-ctl --list-devices | grep -q 'CCX2F3299' && [ ! -f "$INITD_FOLDER"/S50usb_camera ]; then
-          error_msg "This is not compatible with the new hardware version of the camera!"
-        elif [ ! -f "$KLIPPER_SHELL_FILE" ]; then
-          error_msg "Klipper Gcode Shell Command is needed, please install it first!"
-        else
-          run "install_camera_settings_control" "install_menu_ui_k1"
+          continue
+        elif v4l2-ctl --list-devices | grep -q 'CCX2F3299' && [ -f "$INITD_FOLDER"/S50usb_camera ]; then
+          error_msg "You have the new hardware version of the Creality AI camera and it's not compatible!"
+          if [ "lsusb | grep -E \"(Integrated Camera|Webcam|CVD|Video|uvcvideo)\" | wx -l | grep -q '^ [1-9]" ]; then
+            echo -e "\e[1A\e[K ${yellow}An additional USB webcam was detected. It may work with the camera settings, but that's not guaranteed."
+            echo -e "${yellow} Would you like too install anyway?"
+            read -p " ${white}Continue (y/n): ${yellow}" response
+            case "$response" in
+              [nN][oO]|[nN])
+              run "install_menu_ui_k1" 
+            ;;
+            *)
+              if [ ! -f "$KLIPPER_SHELL_FILE" ]; then
+                error_msg "Klipper Gcode Shell Command is needed, please install it first!"
+              else
+                run "install_camera_settings_control" "install_menu_ui_k1"
+              fi
+            esac
+          fi
         fi;;
       18)
         if [ -f "$USB_CAMERA_FILE" ]; then
diff --git a/scripts/paths.sh b/scripts/paths.sh
index 785e935..27d8324 100755
--- a/scripts/paths.sh
+++ b/scripts/paths.sh
@@ -141,7 +141,7 @@ function set_paths() {
   # USB Camera Support
   USB_CAMERA_FILE="${INITD_FOLDER}/S50usb_camera"
   USB_CAMERA_SINGLE_URL="${HS_FILES}/services/S50usb_camera-single"
-  USB_CAMERA_DUAL_URL="${HS_FILES}/services/S50usb_camera-dual"
+  USB_CAMERA_MULTI_URL="${HS_FILES}/services/S50usb_camera-multi"
   
   # OctoEverywhere #
   OCTOEVERYWHERE_FOLDER="${USR_DATA}/octoeverywhere"
@@ -192,4 +192,4 @@ function set_permissions() {
 
   chmod +x "$CURL" >/dev/null 2>&1 &
 
-}
\ No newline at end of file
+}
diff --git a/scripts/usb_camera.sh b/scripts/usb_camera.sh
index 8866bea..3fceb89 100755
--- a/scripts/usb_camera.sh
+++ b/scripts/usb_camera.sh
@@ -23,9 +23,9 @@ function install_usb_camera(){
         echo -e "${white}"
         echo -e "Info: Copying file..."
         if [ "$model" = "K1" ]; then
-          cp "$USB_CAMERA_DUAL_URL" "$INITD_FOLDER"/S50usb_camera
+          cp "$USB_CAMERA_MULTI_URL" "$INITD_FOLDER"/S50usb_camera
         else
-          cp "$USB_CAMERA_SINGLE_URL" "$INITD_FOLDER"/S50usb_camera
+          cp "$USB_CAMERA_MULTI_URL" "$INITD_FOLDER"/S50usb_camera
           echo
           echo -e " ${darkred}Be careful with the 1080p resolution!"
           echo -e " It takes more resources and timelapses are larger and take longer to convert.${white}"
@@ -102,3 +102,4 @@ function remove_usb_camera(){
     esac
   done
 }
+