How to follow the injection ?

[yaudouin]

The problem encountered

Hello,
I have photovoltaic panels. Sometimes I produce more than I consume. It is marked that we can follow the injection but I cannot find this value via MQTT. Is this a bug?

Firmware version

3.2.5

Steps for reproducing the error

Produce more than you consume

What I've already tested

Relevant log output

No response

[ludrao]

It might be possible that injection data is only available if your linky is in Standard mode. the TICMeter can adapt to both Historical or Standard mode, since you use HA, look for this field:

If you are in Historical mode you need to ask your energy vendor (or Enedis) to switch to Standard mode. (it usually take a day, and it is free)
Once you are in standard mode, injected power should appear another field, that is "Puissance injectée"

[yaudouin]

Ok I understand. However I already have the injection value displayed on the Linky meter. I had the impression that the TIC Meter was not reporting the value.

[ludrao]

I guess the TIC Mode is independent of what is displayed on the Linky.
If you confirm you are in Standard mode then they may be another 'configuration' to enable the reporting.

[yaudouin]

Good, it's ok now !

• I changed my Linky meter from Historic to Standard via this form : https://particulier.edf.fr/fr/accueil/espace-client/contact/demande/formulaire/decret-conso.html#/selection-droit-exerce
• I lost contact with my TicMeter after the change, because I had not made any updates since receiving it: the data in standard mode was no longer coming back : check changelog https://github.com/GammaTroniques/TICMeter/releases and update here https://update.gammatroniques.fr/ticmeter/
• Since then, I no longer receive data from my red/white/blue tempo options but I use the overall consumption, but above all I now have the injection value!

Thanks @ludrao

[yaudouin]

And now, homeassistant is sexy

[ludrao]

I do not have solar panels yet, but that's in ma list of futur projects. HA view is indeed quite sexy ;-)
Note: I am not sure about your comment about tempo, I have tempo myself and I do receive the 6 indexes (HP/HC x Bleu/Blanc/Rouge)

[yaudouin]

Since my switch from TIC Historique to TIC STandard, I no longer have the data:
bbrhcjr
bbrhpjw
bbrhpjr
bbrhpjb
bbrhcjb
bbrhcjw

[xmow49]

Hello,
@yaudouin can you send a email at sav[at]gmmts.fr, with your order number and the serial number ?
Somes TICMeter have reading issues in STD mode.

Thanks

[Mattarn]

Hello.
I use MQTT config.
I’m in STANDARD mode, TEMPO.
All tempo index are OK but I don’t havé « puissance injectée »
Any idea ?
The value is OK directly on Linky

[empyrz90]

Hi,
I agree, in MQTT config, there isn't any "puissance injectée" or equivalent value whereas solar panels are producing

Is it planned ?

[yaudouin]

Hello @empyrz90 ,
Yes, it works. The meter must be in standard mode to have access to it. You must follow my comment above.
The injected power arrives in the SINSTI value (instantaneous power in injection)
Yohann

[empyrz90]

@yaudouin
Thanks for your reply.
I forgot to indicate that indeed, the setup is in standard mode and my firmware version is V3.2.13
I just checked and I haven't SINSTI topic, whereas I still have Tempo indexes.

I know that in Z2M, there is a config to activate the injected power, but how about MQTT ?

[yaudouin]

Hmm @empyrz90 , I think you can write an email at sav[at]gmmts.fr
They says : Somes TICMeter have reading issues in STD mode.