Unable to use QMK with the device

[drZoid]

As things stand right now, it is not possible to use this keyboard with QMK. The official build instructions do not work as Make files refer to directories that do not exist. The default keymap does not exist so running make leo/epomaker_split65:default fails.

[Fais649]

Hey, apparently if you use this qmk repo you can get the firmware to compile and flash onto the keyboard (after tweaking some of the include paths in post_rules.mk and copying keymap.c to keymaps/default/keymap.c).
https://github.com/hangshengkeji/qmk_firmware
BUT the right half of the keyboard doesnt work after that lol, it seems to be having trouble communicating with the master.

[Epomaker]

Hey, apparently if you use this qmk repo you can get the firmware to compile and flash onto the keyboard (after tweaking some of the include paths in post_rules.mk and copying keymap.c to keymaps/default/keymap.c). https://github.com/hangshengkeji/qmk_firmware BUT the right half of the keyboard doesnt work after that lol, it seems to be having trouble communicating with the master.

Hi there, the right half needs to be flashed separately. You can remove the R_shift keycap and find a toggle switch, toggle it to the other side, then remove both the keycap and the switch of the R_Space key and use a tweezer to short circuit while plugging in the cable. The right half will be in DFU mode, and then you can flash it.