Skip to content

README.md

Latest commit

 

History

History
33 lines (20 loc) · 986 Bytes

README.md

File metadata and controls

33 lines (20 loc) · 986 Bytes

LoRaShield2.1 Hardware

These are the hardware design files for the LoRaShield2.1 electronics.

These hardware files were created with KiCAD. You may need the KiCAD libraries available here: https://github.com/mogar/KiCAD_libs When opening these projects in KiCAD, you may need to change the path to the libraries from the above link. This can be done in preferences->libraries in both the schematic editor and the layout editor. Make sure the libraries noted there point to wherever you put the above KiCAD_libs repo.

Arduino Library

Check out these libraries:

LoRaShield 2.1 Pinout

LoRaShield uses the SPI pins on your Arduino. It also uses a couple of digital pins for reset and interrupt.

Arduino <-> LoRaShield
D2          interrupt
D3          reset
D10         SPI SS
D11         SPI MOSI
D12         SPI MISO
D13         SPI SCK