Skip to content

configuring-cli.md

Latest commit

 

History

History
55 lines (45 loc) · 3.24 KB

configuring-cli.md

File metadata and controls

55 lines (45 loc) · 3.24 KB

DeNet Datakeeper Node CLI Configuration

If you see the following window, your node is ready to be configured.

Follow the instructions in your terminal

  1. Choose the account or import a new one:

    • To use already imported account: Choose it in the displayed list
    • To import: Choose the import option and paste the copied private key, then press Enter

  2. Set Password: Enter a strong password

    • The private key will be stored securely on your device, encrypted with this password

  3. Choose License ID: enter license number you'd like to start

    • Enter any license number from the Available licenses list

    ⚠️ Important: Do not choose the same license number when running multiple node instances. This is not prohibited, but it can lead to undefined behavior

    💡 Tip: If you want to run multiple licenses on the same computer at the same time, you can conveniently do this using the Node Manager desktop application with a graphical interface. Download now

  4. Enter IP Address: Press enter to use the default one (0.0.0.0)

    • If you'd like to set up the public IP, enter it in the following format: xxx.xxx.xxx.xxx

  5. Choose Port: Press Enter to use default one (55050)

    • Or specify another (value from 10000 to 65535)
    • If you use the public IP address, make sure that the port is forwarded

  6. Specify Storage Directory: Enter path to the user files storage

    • e.g., /home/user/denet_storage (Linux/macOS) or C:\denet_storage (Windows)
    • Ensure the directory exists and has sufficient space

  7. Set Storage Space:

    • Specify the amount of disk space to allocate for DeNet Storage (e.g., 10). Enter the value (only number, without GiB) when prompted.

  8. Select RPC for peaq Blockchain: Press Enter to use default one.

    • Or choose the RPC endpoint (Select RPC for peaq (ChainID: 3338)).

  9. Verify Operation:

    • Watch the terminal output. If no errors appear, your DeNet Node is running correctly.

NOTE:

  1. Configuration parameters could be viewed or changed using CLI config commands
  2. Shared space parameters could be changed using CLI disks commands
  3. To completely reset your configuration and start from scratch, delete the configuration files located at:
    • Linux/macOS: ~/.denode/config-(license-id).json and ~/.denode/config-(license-id).json.bak
    • Windows: %USERPROFILE%\.denode\config-(license-id).json and %USERPROFILE%\.denode\config-(license-id).json.bak
    • Replace (license-id) with your actual license number